Difference between revisions of "OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (41 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | ==Persiapan== | |
| + | * [[OpenBTS: E110 Install Image di MicroSD | Instal Image E110 e1xx-003-make.tar.bz2 ke MicroSD]] | ||
| + | * [[OpenBTS: E110 UHD burn EEPROM RFX Board | Lakukan usrp_burn_db_eeprom agar RFX 1800 menjadi RFX 900]] | ||
==Set IP Adddress Statik== | ==Set IP Adddress Statik== | ||
| Line 12: | Line 14: | ||
# Wired or wireless interfaces | # Wired or wireless interfaces | ||
auto eth0 | auto eth0 | ||
| − | + | # iface eth0 inet dhcp | |
iface eth1 inet dhcp | iface eth1 inet dhcp | ||
| Line 26: | Line 28: | ||
opkg update | opkg update | ||
| − | |||
| − | |||
opkg install libosip2-dev subversion sqlite3 | opkg install libosip2-dev subversion sqlite3 | ||
| − | |||
| − | |||
| − | |||
| − | |||
Cek sqlite3 | Cek sqlite3 | ||
| Line 42: | Line 38: | ||
3.6.23.1 | 3.6.23.1 | ||
| − | == | + | ==Alternatif Download OpenBTS di PC / Laptop== |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Download di PC [[source code]] [[openbts]] bisa melalui | Download di PC [[source code]] [[openbts]] bisa melalui | ||
| Line 58: | Line 45: | ||
apt-get install subversion | apt-get install subversion | ||
svn co http://wush.net/svn/range/software/public openbts-2.8.0 | svn co http://wush.net/svn/range/software/public openbts-2.8.0 | ||
| + | |||
| + | Kemudian di transfer ke E110 | ||
| + | |||
scp -r openbts-2.8.0 root@<ip-address-E110>: | scp -r openbts-2.8.0 root@<ip-address-E110>: | ||
==Compile OpenBTS== | ==Compile OpenBTS== | ||
| − | + | Cara yang lebih mudah untuk download menggunakan wget | |
| − | cd ~ | + | cd ~/src |
| − | + | svn co http://wush.net/svn/range/software/public openbts-2.8.0 | |
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp | vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp | ||
| Line 74: | Line 64: | ||
lanjutkan proses compile | lanjutkan proses compile | ||
| + | mkdir -p /etc/OpenBTS | ||
| + | touch /etc/OpenBTS/SubscriberRegistry.db | ||
| + | touch /etc/OpenBTS/ChannelTable.db | ||
| + | touch /etc/OpenBTS/Stats.db | ||
| + | touch /etc/OpenBTS/TMSITable.db | ||
| + | touch /etc/OpenBTS/Transaction.db | ||
| + | touch /etc/OpenBTS/command | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/a53/trunk/ | ||
| + | make | ||
| + | make install | ||
cd ~/src/openbts-2.8.0/openbts/trunk | cd ~/src/openbts-2.8.0/openbts/trunk | ||
autoreconf -i | autoreconf -i | ||
./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" | ./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" | ||
make clean | make clean | ||
| + | rm -Rf ~/src/openbts-2.8.0/openbts/trunk/apps/transceiver | ||
| + | rm -Rf ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M/transceiver | ||
| + | cd ~/src/openbts-2.8.0/openbts/trunk | ||
make | make | ||
make install | make install | ||
cd ~/src/openbts-2.8.0/openbts/trunk/apps | cd ~/src/openbts-2.8.0/openbts/trunk/apps | ||
ln -s ../Transceiver52M/transceiver . | ln -s ../Transceiver52M/transceiver . | ||
| + | |||
| + | mkdir /var/run/OpenBTS/ | ||
| + | touch /var/run/OpenBTS/TransactionTable.db | ||
| + | |||
| + | |||
| + | ===Jika Menggunakan RFX 1800 daughter board=== | ||
| + | |||
| + | RFX board yang biasanya di beli adalah RFX 1800. | ||
| + | Sebaiknya di flash EEPROM agar bekerja di 900MHz / menjadi RFX 900, | ||
| + | jika terpaksa juga menggunakan RFX 1800, kita perlu mengedit | ||
| + | database konfigurasi [[OpenBTS]] agar beroperasi di '''band 1800MHz channel 860''' | ||
| + | |||
| + | vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.example.sql | ||
| + | |||
| + | Agar | ||
| + | |||
| + | INSERT INTO "CONFIG" VALUES('GSM.Radio.Band',''''1800'''',1,0,'The GSM operating band. Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900). For most Range models, this value is dictated by the hardware and should not be changed. Static.'); | ||
| + | INSERT INTO "CONFIG" VALUES('GSM.Radio.C0',''''860'''',1,0,'The C0 ARFCN. Also the base ARFCN for a multi-ARFCN configuration. Static.'); | ||
Instalasi [[Database]] Konfigurasi [[OpenBTS]] | Instalasi [[Database]] Konfigurasi [[OpenBTS]] | ||
| Line 99: | Line 121: | ||
sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db | sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db | ||
sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit" | sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit" | ||
| + | |||
| + | ==Instalasi Sipauthserve== | ||
| + | |||
| + | Sipauthserve adalah daemon yang memberikan [[SIP]] authentication services. Variabel SIP.Proxy.Registration di [[OpenBTS]] harus menunjuk pada hostname & port Sipauthserve. [[OpenBTS]] harus sudah di buat sebelum membuat Sipauthserve. | ||
| + | |||
| + | Compile Sipauthserve | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/subscriberRegistry/trunk | ||
| + | make | ||
| + | |||
| + | Setup [[database]] untuk Sipauthserve | ||
| + | |||
| + | mkdir /etc/OpenBTS | ||
| + | rm -Rf /etc/OpenBTS/sipauthserve.db | ||
| + | cd ~/src/openbts-2.8.0/subscriberRegistry/trunk | ||
| + | sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit" | ||
| + | |||
| + | ==Instalasi Smqueue== | ||
| + | |||
| + | Smqueue dapat di instalasi dengan melakukan langkah berikut | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/smqueue/trunk | ||
| + | autoreconf -i | ||
| + | ./configure | ||
| + | make clean | ||
| + | make | ||
| + | make install | ||
| + | |||
| + | Selanjutnya, inisialisasi konfigurasi [[database]] [[OpenBTS]] | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/smqueue/trunk | ||
| + | rm -Rf /etc/OpenBTS/smqueue.db | ||
| + | sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit" | ||
==Menjalankan OpenBTS== | ==Menjalankan OpenBTS== | ||
| − | cd ~/src/openbts-2.8.0/openbts/trunk/ | + | '''[[OpenBTS: Yate Softswitch | Pastikan Yate sudah di Instalasi.]]''' |
| − | ./ | + | |
| + | Lakukan di tiga (3) windows yang berbeda | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/ | ||
| + | ./sipauthserve & | ||
| + | |||
| + | mkdir -p /var/lib/OpenBTS | ||
| + | touch /var/lib/OpenBTS/smq.cdr | ||
| + | cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/ | ||
| + | ./smqueue & | ||
| + | |||
| + | cd ~/src/yate | ||
| + | rm -Rf /var/log/yate | ||
| + | ./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d | ||
| − | cd ~/src/openbts-2.8.0/openbts/trunk/apps | + | mkdir /var/run/OpenBTS/ |
| + | touch /var/run/OpenBTS/TransactionTable.db | ||
| + | cd ~/src/openbts-2.8.0/openbts/trunk/apps | ||
./OpenBTS & | ./OpenBTS & | ||
| Line 115: | Line 185: | ||
Parameter yang perlu di ubah | Parameter yang perlu di ubah | ||
| + | config Control.LUR.OpenRegistration \W+ | ||
| + | config GSM.Radio.Band 900 | ||
| + | config GSM.Radio.C0 20 | ||
config GSM.Identity.MCC 001 | config GSM.Identity.MCC 001 | ||
config GSM.Identity.MNC 01 | config GSM.Identity.MNC 01 | ||
config GSM.Identity.BSIC.NCC 0 | config GSM.Identity.BSIC.NCC 0 | ||
| + | config GSM.Identity.ShortName OpenBTS | ||
config GSM.CellSelection.NCCsPermitted 1 | config GSM.CellSelection.NCCsPermitted 1 | ||
| + | config GSM.CellSelection.BSIC.BCC 101 | ||
| + | config GSM.Identity.LAC 1001 | ||
| + | config GSM.Identity.CID 101 | ||
config SIP.Local.IP 192.168.0.22 | config SIP.Local.IP 192.168.0.22 | ||
config SIP.Proxy.Registration 192.168.0.3:5064 | config SIP.Proxy.Registration 192.168.0.3:5064 | ||
config SIP.Proxy.SMS 192.168.0.3:5063 | config SIP.Proxy.SMS 192.168.0.3:5063 | ||
config SIP.Proxy.Speech 192.168.0.3:5060 | config SIP.Proxy.Speech 192.168.0.3:5060 | ||
| − | config | + | |
| − | + | config save | |
| − | + | ||
| + | ==Debug Transceiver== | ||
| + | |||
| + | cd ~/src/openbts-2.8.0/openbts/trunk/apps/ | ||
| + | ./transceiver DEBUG | ||
==Error== | ==Error== | ||
| Line 149: | Line 230: | ||
'''SOLUSI:''' | '''SOLUSI:''' | ||
| + | |||
| + | * Naikan sleep() di OpenBTS.cpp & compile ulang | ||
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp | vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp | ||
| − | + | sleep(8); | |
| − | + | * '''SEBAIKNYA:''' [[OpenBTS: E110 UHD burn EEPROM RFX Board | Gunakan RFX900. Burn EEPROM di RFX1800 agar menjadi RFX900]] | |
| + | * Jika terpaksa menggunakan RFX 1800, edit OpenBTS.example.sql agar menggunakan frekuensi 1800 & ARFCN 800-an. | ||
| + | * Restart OpenBTS | ||
| − | + | killall transceiver | |
| + | cd ~/src/openbts-2.8.0/openbts/trunk/apps | ||
| + | ./OpenBTS & | ||
===Error set_rates=== | ===Error set_rates=== | ||
| Line 182: | Line 269: | ||
* [[OpenBTS]] | * [[OpenBTS]] | ||
| + | * [[OpenBTS: Arsitektur secara umum]] | ||
===Persiapan=== | ===Persiapan=== | ||
| Line 189: | Line 277: | ||
* [[USRP: Kalibrasi ClockTamer]] | * [[USRP: Kalibrasi ClockTamer]] | ||
* [[USRP: ClockTamer Control Protocol]] | * [[USRP: ClockTamer Control Protocol]] | ||
| + | * [[USRP: ClockTamer Flashing]] | ||
* [[USRP: Instalasi Board]] | * [[USRP: Instalasi Board]] | ||
* [[OpenBTS: GIT Source Code]] | * [[OpenBTS: GIT Source Code]] | ||
* [[USRP: Rangkaian Board USRP]] | * [[USRP: Rangkaian Board USRP]] | ||
* [[OpenBTS: Tethr untuk Bencana Alam]] | * [[OpenBTS: Tethr untuk Bencana Alam]] | ||
| + | * [[USRP: Tip Pemesanan]] | ||
| + | |||
| + | ===Script=== | ||
| + | |||
| + | * [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]] | ||
| + | * [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]] | ||
| + | * [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]] | ||
| + | * [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]] | ||
===OpenBTS 2.6=== | ===OpenBTS 2.6=== | ||
| Line 201: | Line 298: | ||
* [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED''' | * [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED''' | ||
* [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED''' | * [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED''' | ||
| + | * [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: Contoh Aplikasi]] | * [[GNURadio: Contoh Aplikasi]] | ||
* [[GNURadio: Spectrum Analizer GSM]] | * [[GNURadio: Spectrum Analizer GSM]] | ||
| Line 207: | Line 305: | ||
* [[OpenBTS: Ubuntu Install]] '''RECOMMENDED''' | * [[OpenBTS: Ubuntu Install]] '''RECOMMENDED''' | ||
* [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED''' | * [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED'' | ||
* [[OpenBTS: Konfigurasi]] '''RECOMMENDED''' | * [[OpenBTS: Konfigurasi]] '''RECOMMENDED''' | ||
* [[OpenBTS: Kalibrasi]] | * [[OpenBTS: Kalibrasi]] | ||
| Line 227: | Line 326: | ||
* [[GNURadio: Install UHD]] | * [[GNURadio: Install UHD]] | ||
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]] | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]] | ||
| + | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]] | ||
| + | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
* [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | * [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
| + | * [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
| + | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED'' | ||
| + | * [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED'' | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED'' | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED'' | ||
| Line 234: | Line 338: | ||
* [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED'' | * [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]] | * [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]] | ||
| − | * [[GNURadio: UHD]] | + | * [[GNURadio: UHD]] ''NOT RECOMMENDED'' |
| − | * [[GNURadio: UHD Image]] | + | * [[GNURadio: UHD Image]] ''NOT RECOMMENDED'' |
| + | * [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: UHD Identifikasi Device]] | * [[GNURadio: UHD Identifikasi Device]] | ||
* [[OpenBTS: Ubuntu 11.10 Install]] | * [[OpenBTS: Ubuntu 11.10 Install]] | ||
| Line 241: | Line 346: | ||
* [[OpenBTS: 2.8 dari SVN Install]] | * [[OpenBTS: 2.8 dari SVN Install]] | ||
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED''' | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED'' | ||
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND''' | * [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND''' | ||
| − | * [[OpenBTS: Yate Softswitch]] | + | * [[OpenBTS: Yate Softswitch]] '''RECOMMENDED''' |
| + | * [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED''' | ||
| + | * [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED''' | ||
* [[OpenBTS: Yate Config Test]] | * [[OpenBTS: Yate Config Test]] | ||
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED''' | * [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED''' | ||
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED''' | * [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED''' | ||
* [[OpenBTS: 2.8 Konfigurasi]] | * [[OpenBTS: 2.8 Konfigurasi]] | ||
| + | * [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]] | ||
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]] | * [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]] | ||
* [[OpenBTS: Database SQLite]] | * [[OpenBTS: Database SQLite]] | ||
| + | * [[OpenBTS: Set SQLite Subscriber Registry secara manual]] | ||
| + | * [[OpenBTS: Set SQLite parameter smqueue]] | ||
| + | * [[OpenBTS: FreeSWITCH]] | ||
===Multi OpenBTS 2.8=== | ===Multi OpenBTS 2.8=== | ||
| − | * [[OpenBTS: Pola Multi OpenBTS]] | + | * [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED''' |
| + | * [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED''' | ||
| + | * [[Multi OpenBTS: Catatan BSIC=NCC+BCC]] | ||
| + | * [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]] | ||
| + | * [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]] | ||
| + | * [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]] | ||
| + | * [[Multi OpenBTS: Catatan BCCH]] | ||
| + | * [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]] | ||
| + | |||
| + | ===OpenBTS 3.1.x=== | ||
| + | |||
| + | * [[OpenBTS: Install UHD untuk USRP1]] | ||
| + | * [[OpenBTS: UHD Identifikasi Device]] | ||
| + | * [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1''' | ||
| + | * [[OpenBTS: Yate Compile]] | ||
===Ettus E110=== | ===Ettus E110=== | ||
* [[OpenBTS: E110 Cara Login]] | * [[OpenBTS: E110 Cara Login]] | ||
| − | * [[OpenBTS: E110 Install Image di MicroSD]] | + | * [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*''' |
* [[OpenBTS: E110 Cek Daughter Board]] | * [[OpenBTS: E110 Cek Daughter Board]] | ||
* [[OpenBTS: E110 Mengubah Master Clock]] | * [[OpenBTS: E110 Mengubah Master Clock]] | ||
* [[OpenBTS: E110 Kalibrasi Clock]] | * [[OpenBTS: E110 Kalibrasi Clock]] | ||
| + | * [[OpenBTS: E110 Konfigurasi Jaringan]] | ||
* [[OpenBTS: E110 Bekerja dengan opkg]] | * [[OpenBTS: E110 Bekerja dengan opkg]] | ||
| + | * [[OpenBTS: E110 Instalasi iptables]] | ||
* [[OpenBTS: E110 GNURadio]] | * [[OpenBTS: E110 GNURadio]] | ||
| − | * [[OpenBTS: E110 Install UHD Image]] | + | * [[OpenBTS: E110 Compile UHD]] ''Not Recommended'' |
| + | * [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended'' | ||
| + | * [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended'' | ||
| + | * [[OpenBTS: E110 Install UHD Image]] ''Not Recommended'' | ||
* [[OpenBTS: E110 Instalasi OpenBTS]] | * [[OpenBTS: E110 Instalasi OpenBTS]] | ||
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED'' | * [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED'' | ||
| − | * [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] | + | * [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*''' |
| + | * [[OpenBTS: E110 Yate Softswitch]] | ||
| + | |||
| + | ===Ettus N210=== | ||
| + | |||
| + | * [[OpenBTS: N210 Instalasi GPSDO Kit]] | ||
| + | * [[OpenBTS: N210 GNURadio]] | ||
| + | * [[OpenBTS: N210 GNURadio 3.7.0]] | ||
| + | * [[OpenBTS: N210 Instalasi OpenBTS]] | ||
| + | * [[OpenBTS: N210 Instalasi Yate]] | ||
| + | * [[OpenBTS: N210 Yate Config Test]] | ||
| + | * [[OpenBTS: N210 Burn Firmware]] | ||
| + | |||
| + | ===RangeNetworks=== | ||
| + | |||
| + | * [[OpenBTS: RangeNetwork Foto]] | ||
| + | * [[OpenBTS: RangeNetwork menggunakan USB recovery image]] | ||
| + | * [[OpenBTS: RangeNetwork Default Setting]] | ||
| + | * [[OpenBTS: RangeNetwork Instalasi UHD]] | ||
| + | * [[OpenBTS: RangeNetwork Compile GNURadio UHD]] | ||
| + | * [[OpenBTS: RangeNetwork Compile]] | ||
| + | * [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]] | ||
| + | * [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]] | ||
| + | * [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*''' | ||
| + | * [[OpenBTS: RangeNetwork Web Interface]] | ||
| + | * [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]] | ||
| + | * [[OpenBTS: RangeNetwork Audit]] | ||
| + | * [[VoIP: Trunk]] | ||
| + | |||
| + | ===GPRS=== | ||
| + | |||
| + | * [[OpenBTS: GPRS]] | ||
| + | * [[OpenBTS: GPRS Konfigurasi]] | ||
| + | * [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]] | ||
| + | |||
| + | ===Briker OpenBTS=== | ||
| + | |||
| + | * [[OpenBTS: Briker]] | ||
| + | |||
| + | ===FreeSWITCH OpenBTS=== | ||
| + | |||
| + | * [[OpenBTS: FreeSWITCH]] | ||
===Power Amplifier=== | ===Power Amplifier=== | ||
| Line 273: | Line 448: | ||
* [[Power Amplifier 900MHz]] | * [[Power Amplifier 900MHz]] | ||
* [[Duplexer]] | * [[Duplexer]] | ||
| + | * [[OpenBTS: Menaikan Jangkauan OpenBTS]] | ||
===Lain Lain=== | ===Lain Lain=== | ||
| Line 303: | Line 479: | ||
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]] | * [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]] | ||
* [[OpenBTS: Daftar Artikel di Media]] | * [[OpenBTS: Daftar Artikel di Media]] | ||
| + | * [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]] | ||
| + | * [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]] | ||
| + | * [[OpenBTS: Beroperasi di Papua]] | ||
===Dokumentasi Video=== | ===Dokumentasi Video=== | ||
| + | * http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS | ||
* http://youtu.be/8ogOcUSpINU (1/6) | * http://youtu.be/8ogOcUSpINU (1/6) | ||
* http://youtu.be/F5d7HGuhppk (2/6) | * http://youtu.be/F5d7HGuhppk (2/6) | ||
| Line 312: | Line 492: | ||
* http://youtu.be/6LCuoeI57ak (5/6) | * http://youtu.be/6LCuoeI57ak (5/6) | ||
* http://youtu.be/-dEqcHoIlYk (6/6) | * http://youtu.be/-dEqcHoIlYk (6/6) | ||
| + | * http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share | ||
| + | |||
| + | ===Perjuangan OpenBTS=== | ||
| + | |||
| + | * http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter | ||
| + | |||
| + | |||
[[Category: Wireless]] | [[Category: Wireless]] | ||
[[Category: Selular]] | [[Category: Selular]] | ||
Latest revision as of 06:03, 11 March 2014
Persiapan
- Instal Image E110 e1xx-003-make.tar.bz2 ke MicroSD
- Lakukan usrp_burn_db_eeprom agar RFX 1800 menjadi RFX 900
Set IP Adddress Statik
Edit
vi /etc/network/interfaces
Isi dengan
# Wired or wireless interfaces auto eth0 # iface eth0 inet dhcp iface eth1 inet dhcp iface eth0 inet static address 192.168.0.22 netmask 255.255.255.0 network 192.168.0.0 gateway 192.168.0.222
Instalasi Aplikasi Pendukung
Instal aplikasi pendukung
opkg update opkg install libosip2-dev subversion sqlite3
Cek sqlite3
sqlite3 --version
Harusnya keluar seperti
3.6.23.1
Alternatif Download OpenBTS di PC / Laptop
Download di PC source code openbts bisa melalui
cd /usr/local/src apt-get install subversion svn co http://wush.net/svn/range/software/public openbts-2.8.0
Kemudian di transfer ke E110
scp -r openbts-2.8.0 root@<ip-address-E110>:
Compile OpenBTS
Cara yang lebih mudah untuk download menggunakan wget
cd ~/src svn co http://wush.net/svn/range/software/public openbts-2.8.0 vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp
pastikan sleep > 5, misalnya
sleep(8);
lanjutkan proses compile
mkdir -p /etc/OpenBTS touch /etc/OpenBTS/SubscriberRegistry.db touch /etc/OpenBTS/ChannelTable.db touch /etc/OpenBTS/Stats.db touch /etc/OpenBTS/TMSITable.db touch /etc/OpenBTS/Transaction.db touch /etc/OpenBTS/command
cd ~/src/openbts-2.8.0/a53/trunk/ make make install cd ~/src/openbts-2.8.0/openbts/trunk autoreconf -i ./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" make clean rm -Rf ~/src/openbts-2.8.0/openbts/trunk/apps/transceiver rm -Rf ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M/transceiver cd ~/src/openbts-2.8.0/openbts/trunk make make install cd ~/src/openbts-2.8.0/openbts/trunk/apps ln -s ../Transceiver52M/transceiver .
mkdir /var/run/OpenBTS/ touch /var/run/OpenBTS/TransactionTable.db
Jika Menggunakan RFX 1800 daughter board
RFX board yang biasanya di beli adalah RFX 1800. Sebaiknya di flash EEPROM agar bekerja di 900MHz / menjadi RFX 900, jika terpaksa juga menggunakan RFX 1800, kita perlu mengedit database konfigurasi OpenBTS agar beroperasi di band 1800MHz channel 860
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.example.sql
Agar
INSERT INTO "CONFIG" VALUES('GSM.Radio.Band','1800',1,0,'The GSM operating band. Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900). For most Range models, this value is dictated by the hardware and should not be changed. Static.');
INSERT INTO "CONFIG" VALUES('GSM.Radio.C0','860',1,0,'The C0 ARFCN. Also the base ARFCN for a multi-ARFCN configuration. Static.');
Instalasi Database Konfigurasi OpenBTS
cd ~/src/openbts-2.8.0/openbts/trunk sudo mkdir /etc/OpenBTS rm -Rf /etc/OpenBTS/OpenBTS.db sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit"
Instalasi Subscriber Registry
Lakukan
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles sudo mkdir /var/lib/asterisk/ sudo mkdir -p /var/lib/asterisk/sqlite3dir sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
Instalasi Sipauthserve
Sipauthserve adalah daemon yang memberikan SIP authentication services. Variabel SIP.Proxy.Registration di OpenBTS harus menunjuk pada hostname & port Sipauthserve. OpenBTS harus sudah di buat sebelum membuat Sipauthserve.
Compile Sipauthserve
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk make
Setup database untuk Sipauthserve
mkdir /etc/OpenBTS rm -Rf /etc/OpenBTS/sipauthserve.db cd ~/src/openbts-2.8.0/subscriberRegistry/trunk sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"
Instalasi Smqueue
Smqueue dapat di instalasi dengan melakukan langkah berikut
cd ~/src/openbts-2.8.0/smqueue/trunk autoreconf -i ./configure make clean make make install
Selanjutnya, inisialisasi konfigurasi database OpenBTS
cd ~/src/openbts-2.8.0/smqueue/trunk rm -Rf /etc/OpenBTS/smqueue.db sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"
Menjalankan OpenBTS
Pastikan Yate sudah di Instalasi.
Lakukan di tiga (3) windows yang berbeda
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/ ./sipauthserve &
mkdir -p /var/lib/OpenBTS touch /var/lib/OpenBTS/smq.cdr cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/ ./smqueue &
cd ~/src/yate rm -Rf /var/log/yate ./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d
mkdir /var/run/OpenBTS/ touch /var/run/OpenBTS/TransactionTable.db cd ~/src/openbts-2.8.0/openbts/trunk/apps ./OpenBTS &
Edit Konfigurasi
cd ~/src/openbts-2.8.0/openbts/trunk/apps/ ./OpenBTSCLI
Parameter yang perlu di ubah
config Control.LUR.OpenRegistration \W+ config GSM.Radio.Band 900 config GSM.Radio.C0 20 config GSM.Identity.MCC 001 config GSM.Identity.MNC 01 config GSM.Identity.BSIC.NCC 0 config GSM.Identity.ShortName OpenBTS config GSM.CellSelection.NCCsPermitted 1 config GSM.CellSelection.BSIC.BCC 101 config GSM.Identity.LAC 1001 config GSM.Identity.CID 101 config SIP.Local.IP 192.168.0.22 config SIP.Proxy.Registration 192.168.0.3:5064 config SIP.Proxy.SMS 192.168.0.3:5063 config SIP.Proxy.Speech 192.168.0.3:5060
config save
Debug Transceiver
cd ~/src/openbts-2.8.0/openbts/trunk/apps/ ./transceiver DEBUG
Error
Error SubscriberRegistry
EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file Mar 29 07:26:33 usrp-e1xx openbts: EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file 1333002393.869356 1079640064:
SOLUSI:
Instalasi Subscriber Registry, Lakukan
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles sudo mkdir /var/lib/asterisk/ sudo mkdir -p /var/lib/asterisk/sqlite3dir sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
Error TX Dead
ALERT 1089582176 TRXManager.cpp:92:clockHandler: TRX clock interface timed out, assuming TRX is dead.
SOLUSI:
- Naikan sleep() di OpenBTS.cpp & compile ulang
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp
sleep(8);
- SEBAIKNYA: Gunakan RFX900. Burn EEPROM di RFX1800 agar menjadi RFX900
- Jika terpaksa menggunakan RFX 1800, edit OpenBTS.example.sql agar menggunakan frekuensi 1800 & ARFCN 800-an.
- Restart OpenBTS
killall transceiver cd ~/src/openbts-2.8.0/openbts/trunk/apps ./OpenBTS &
Error set_rates
Saat
cd ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M ./USRPping
Error
ALERT 1075093504 UHDDevice.cpp:357:set_rates: Actual sample rate differs from desired rate
SOLUSI:
Compile UHD agar master clock 52MHz
Referensi
- http://gnuradio.org/redmine/projects/gnuradio/wiki/OpenBTSE100
- http://wush.net/trac/rangepublic/wiki/BuildInstallRun
- http://wush.net/trac/rangepublic/wiki/BuildInstallRun#SubscriberRegistry
Pranala Menarik
Persiapan
- USRP: High Precision Clock
- USRP: Menyambungkan ClockTamer ke USRP1
- USRP: Kalibrasi ClockTamer
- USRP: ClockTamer Control Protocol
- USRP: ClockTamer Flashing
- USRP: Instalasi Board
- OpenBTS: GIT Source Code
- USRP: Rangkaian Board USRP
- OpenBTS: Tethr untuk Bencana Alam
- USRP: Tip Pemesanan
Script
- OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04
- OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04
- OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit
- OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit
OpenBTS 2.6
- GNURadio
- GNURadio: Ubuntu Install
- GNURadio: Menggunakan UHD
- GNURadio: Ubuntu Install GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz RECOMMENDED
- GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz NOT RECOMMENDED
- GNURadio: Contoh Aplikasi
- GNURadio: Spectrum Analizer GSM
- GNURadio: Mengubah board RFX1800 menjadi RFX900
- GNURadio: Programming Untuk Pemula
- OpenBTS: Ubuntu Install RECOMMENDED
- OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz RECOMMENDED
- OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz NOT RECOMMENDED
- OpenBTS: Konfigurasi RECOMMENDED
- OpenBTS: Kalibrasi
- OpenBTS: Konfigurasi Asterisk untuk OpenBTS RECOMMENDED
- OpenBTS: Menjalankan smqueue
- OpenBTS: Mengoperasikan BTS RECOMMENDED
- OpenBTS: Tampilan di Nokia saat pakai OpenBTS
- OpenBTS: Operasi 1800 MHz
- OpenBTS: Beberapa Tips
- OpenBTS: USRP2
- OpenBTS: Amplifier
- OpenBTS: SMS
- AirProbe
OpenBTS 2.8
- GNURadio: Ubuntu 11.10 Install NOT RECOMMENED
- GNURadio: Ubuntu 11.10 instalasi menggunakan Repo NOT RECOMMENDED
- GNURadio: Download GNURadio
- GNURadio: Install UHD
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2 NOT RECOMMENDED
- GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Install dari GIT GNURadio NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 cek USRP Daughter Board
- GNURadio: UHD NOT RECOMMENDED
- GNURadio: UHD Image NOT RECOMMENDED
- GNURadio: UHD burn EEPROM RFX Board di USRP1 NOT RECOMMENDED
- GNURadio: UHD Identifikasi Device
- OpenBTS: Ubuntu 11.10 Install
- OpenBTS: dari GIT ttsou
- OpenBTS: 2.8 dari SVN Install
- OpenBTS: 2.8 dari SVN Install Clock 52MHz RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10 RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
- OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio NOT RECOMMENDED
- OpenBTS: 2.8 Edit User di sqlite3.db RECOMMEND
- OpenBTS: Yate Softswitch RECOMMENDED
- OpenBTS: Yate Softswitch install Ubuntu 12.10 RECOMMENDED
- OpenBTS: Yate Softswitch install Ubuntu 13.04 RECOMMENDED
- OpenBTS: Yate Config Test
- OpenBTS: 2.8 Instalasi Real Time Asterisk RECOMMENDED
- OpenBTS: 2.8 Menjalankan RECOMMENDED
- OpenBTS: 2.8 Konfigurasi
- OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh
- OpenBTS: 2.8 Konfigurasi Subscriber Registery
- OpenBTS: Database SQLite
- OpenBTS: Set SQLite Subscriber Registry secara manual
- OpenBTS: Set SQLite parameter smqueue
- OpenBTS: FreeSWITCH
Multi OpenBTS 2.8
- OpenBTS: Pola Multi OpenBTS RECOMMENDED
- Multi OpenBTS: Catatan Konfigurasi RECOMMENDED
- Multi OpenBTS: Catatan BSIC=NCC+BCC
- Multi OpenBTS: Catatan Frekuensi Planning di GSM
- Multi OpenBTS: Catatan BTS Color Code BCC di GSM
- Multi OpenBTS: Catatan Network Color Code NCC di GSM
- Multi OpenBTS: Catatan BCCH
- Multi OpenBTS: Catatan Public Land Mobile Network PLMN
OpenBTS 3.1.x
- OpenBTS: Install UHD untuk USRP1
- OpenBTS: UHD Identifikasi Device
- OpenBTS: OpenBTS 3.1.3 Compile Tidak bisa untuk USRP1
- OpenBTS: Yate Compile
Ettus E110
- OpenBTS: E110 Cara Login
- OpenBTS: E110 Install Image di MicroSD *RECOMMENDED*
- OpenBTS: E110 Cek Daughter Board
- OpenBTS: E110 Mengubah Master Clock
- OpenBTS: E110 Kalibrasi Clock
- OpenBTS: E110 Konfigurasi Jaringan
- OpenBTS: E110 Bekerja dengan opkg
- OpenBTS: E110 Instalasi iptables
- OpenBTS: E110 GNURadio
- OpenBTS: E110 Compile UHD Not Recommended
- OpenBTS: E110 Compile UHD dari Release Bukan git Not Recommended
- OpenBTS: E110 UHD burn EEPROM RFX Board Not Recommended
- OpenBTS: E110 Install UHD Image Not Recommended
- OpenBTS: E110 Instalasi OpenBTS
- OpenBTS: E110 Instalasi OpenBTS 2.6 NOT RECOMMENDED
- OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS *RECOMMENDED*
- OpenBTS: E110 Yate Softswitch
Ettus N210
- OpenBTS: N210 Instalasi GPSDO Kit
- OpenBTS: N210 GNURadio
- OpenBTS: N210 GNURadio 3.7.0
- OpenBTS: N210 Instalasi OpenBTS
- OpenBTS: N210 Instalasi Yate
- OpenBTS: N210 Yate Config Test
- OpenBTS: N210 Burn Firmware
RangeNetworks
- OpenBTS: RangeNetwork Foto
- OpenBTS: RangeNetwork menggunakan USB recovery image
- OpenBTS: RangeNetwork Default Setting
- OpenBTS: RangeNetwork Instalasi UHD
- OpenBTS: RangeNetwork Compile GNURadio UHD
- OpenBTS: RangeNetwork Compile
- OpenBTS: RangeNetwork Compile OpenBTS 2.8.0
- OpenBTS: RangeNetwork Compile OpenBTS 3.1.3
- OpenBTS: RangeNetwork Yate Compile *RECOMMENDED*
- OpenBTS: RangeNetwork Web Interface
- OpenBTS: RangeNetwork Trunk ke Asterisk Lain
- OpenBTS: RangeNetwork Audit
- VoIP: Trunk
GPRS
Briker OpenBTS
FreeSWITCH OpenBTS
Power Amplifier
Lain Lain
- OpenBTS: Materi Magang di ICTWATCH
- OpenBTS: Seminar Outline
- OpenBTS: Workshop Outline
- Membuat Base Station GSM Open Source
- Teknologi Selular
- GSM: Daftar Channel Frekuensi
- Wireless Internet
- OpenBSC
- AirProbe
- Base station subsystem
- GSM
- Asterisk
- Mobile phone
Catatan Legal dan Pendukung
- Siapa Bilang OpenBTS Ilegal?
- OpenBTS: Catatan MNC dan MCC Indonesia
- OpenBTS: Catatan MNC dan MCC COOL
- OpenBTS : Alokasi Frekuensi Operator GSM Indonesia
- GSM: Daftar Channel Frekuensi
Catatan Sejarah
- 2011/04/30 - Workshop OpenBTS Pertama di Indonesia dilakukan di Univ Gajah Putih Takengon Aceh Tengah
- OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan
- OpenBTS: Daftar Artikel di Media
- OpenBTS: Permohonan Kanal dan DID untuk OpenBTS
- OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman
- OpenBTS: Beroperasi di Papua
Dokumentasi Video
- http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
- http://youtu.be/8ogOcUSpINU (1/6)
- http://youtu.be/F5d7HGuhppk (2/6)
- http://youtu.be/90Jgq6bOgrQ (3/6)
- http://youtu.be/cNkx_qNqdfc (4/6)
- http://youtu.be/6LCuoeI57ak (5/6)
- http://youtu.be/-dEqcHoIlYk (6/6)
- http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share