Difference between revisions of "OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS"

Latest revision as of 06:03, 11 March 2014

Persiapan

Set IP Adddress Statik

Edit

vi /etc/network/interfaces

Isi dengan

# Wired or wireless interfaces
auto eth0
# iface eth0 inet dhcp
iface eth1 inet dhcp

iface eth0 inet static  
	address 192.168.0.22
	netmask 255.255.255.0
	network 192.168.0.0
	gateway 192.168.0.222

Instalasi Aplikasi Pendukung

Instal aplikasi pendukung

opkg update
opkg install libosip2-dev subversion sqlite3

Cek sqlite3

sqlite3 --version

Harusnya keluar seperti

3.6.23.1

Alternatif Download OpenBTS di PC / Laptop

Download di PC source code openbts bisa melalui

cd /usr/local/src
apt-get install subversion
svn co http://wush.net/svn/range/software/public openbts-2.8.0

Kemudian di transfer ke E110

scp -r openbts-2.8.0 root@<ip-address-E110>:

Compile OpenBTS

Cara yang lebih mudah untuk download menggunakan wget

cd ~/src
svn co http://wush.net/svn/range/software/public openbts-2.8.0
vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp

pastikan sleep > 5, misalnya

sleep(8);

lanjutkan proses compile

mkdir -p /etc/OpenBTS
touch /etc/OpenBTS/SubscriberRegistry.db
touch /etc/OpenBTS/ChannelTable.db
touch /etc/OpenBTS/Stats.db
touch /etc/OpenBTS/TMSITable.db
touch /etc/OpenBTS/Transaction.db
touch /etc/OpenBTS/command

cd ~/src/openbts-2.8.0/a53/trunk/
make
make install
cd ~/src/openbts-2.8.0/openbts/trunk
autoreconf -i
./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" 
make clean
rm -Rf ~/src/openbts-2.8.0/openbts/trunk/apps/transceiver
rm -Rf ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M/transceiver
cd ~/src/openbts-2.8.0/openbts/trunk
make 
make install
cd ~/src/openbts-2.8.0/openbts/trunk/apps
ln -s ../Transceiver52M/transceiver .

mkdir /var/run/OpenBTS/
touch /var/run/OpenBTS/TransactionTable.db

Jika Menggunakan RFX 1800 daughter board

RFX board yang biasanya di beli adalah RFX 1800. Sebaiknya di flash EEPROM agar bekerja di 900MHz / menjadi RFX 900, jika terpaksa juga menggunakan RFX 1800, kita perlu mengedit database konfigurasi OpenBTS agar beroperasi di band 1800MHz channel 860

vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.example.sql

Agar

INSERT INTO "CONFIG" VALUES('GSM.Radio.Band','1800',1,0,'The GSM operating band.  Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900).  For most Range models, this value is dictated by the hardware and should not be changed.  Static.');
INSERT INTO "CONFIG" VALUES('GSM.Radio.C0','860',1,0,'The C0 ARFCN.  Also the base ARFCN for a multi-ARFCN configuration.  Static.');

Instalasi Database Konfigurasi OpenBTS

cd ~/src/openbts-2.8.0/openbts/trunk
sudo mkdir /etc/OpenBTS
rm -Rf /etc/OpenBTS/OpenBTS.db
sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit"

Instalasi Subscriber Registry

Lakukan

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
sudo mkdir /var/lib/asterisk/
sudo mkdir -p /var/lib/asterisk/sqlite3dir
sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db
sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"

Instalasi Sipauthserve

Sipauthserve adalah daemon yang memberikan SIP authentication services. Variabel SIP.Proxy.Registration di OpenBTS harus menunjuk pada hostname & port Sipauthserve. OpenBTS harus sudah di buat sebelum membuat Sipauthserve.

Compile Sipauthserve

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
make

Setup database untuk Sipauthserve

mkdir /etc/OpenBTS
rm -Rf /etc/OpenBTS/sipauthserve.db
cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"

Instalasi Smqueue

Smqueue dapat di instalasi dengan melakukan langkah berikut

cd ~/src/openbts-2.8.0/smqueue/trunk
autoreconf -i
./configure 
make clean
make 
make install

Selanjutnya, inisialisasi konfigurasi database OpenBTS

cd ~/src/openbts-2.8.0/smqueue/trunk
rm -Rf /etc/OpenBTS/smqueue.db
sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"

Menjalankan OpenBTS

Pastikan Yate sudah di Instalasi.

Lakukan di tiga (3) windows yang berbeda

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/
./sipauthserve &

mkdir -p /var/lib/OpenBTS
touch /var/lib/OpenBTS/smq.cdr
cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/
./smqueue &

cd ~/src/yate
rm -Rf /var/log/yate
./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d

mkdir /var/run/OpenBTS/
touch /var/run/OpenBTS/TransactionTable.db
cd ~/src/openbts-2.8.0/openbts/trunk/apps
./OpenBTS &

Edit Konfigurasi

cd ~/src/openbts-2.8.0/openbts/trunk/apps/
./OpenBTSCLI

Parameter yang perlu di ubah

config Control.LUR.OpenRegistration \W+
config GSM.Radio.Band 900
config GSM.Radio.C0 20
config GSM.Identity.MCC 001
config GSM.Identity.MNC 01
config GSM.Identity.BSIC.NCC 0
config GSM.Identity.ShortName OpenBTS
config GSM.CellSelection.NCCsPermitted 1
config GSM.CellSelection.BSIC.BCC 101
config GSM.Identity.LAC 1001
config GSM.Identity.CID 101
config SIP.Local.IP 192.168.0.22
config SIP.Proxy.Registration 192.168.0.3:5064
config SIP.Proxy.SMS 192.168.0.3:5063
config SIP.Proxy.Speech 192.168.0.3:5060

config save

Debug Transceiver

cd ~/src/openbts-2.8.0/openbts/trunk/apps/
./transceiver DEBUG

Error

Error SubscriberRegistry

EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file
Mar 29 07:26:33 usrp-e1xx openbts: EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open  SubscriberRegistry database: unable to open database file
1333002393.869356 1079640064:

SOLUSI:

Instalasi Subscriber Registry, Lakukan

cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
sudo mkdir /var/lib/asterisk/
sudo mkdir -p /var/lib/asterisk/sqlite3dir
sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"

Error TX Dead

ALERT 1089582176 TRXManager.cpp:92:clockHandler: TRX clock interface timed out, assuming TRX is dead.

SOLUSI:

Naikan sleep() di OpenBTS.cpp & compile ulang

vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp

sleep(8);

SEBAIKNYA: Gunakan RFX900. Burn EEPROM di RFX1800 agar menjadi RFX900
Jika terpaksa menggunakan RFX 1800, edit OpenBTS.example.sql agar menggunakan frekuensi 1800 & ARFCN 800-an.
Restart OpenBTS

killall transceiver
cd ~/src/openbts-2.8.0/openbts/trunk/apps
./OpenBTS &

Error set_rates

Saat

cd ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M
./USRPping

Error

ALERT 1075093504 UHDDevice.cpp:357:set_rates: Actual sample rate differs from desired rate

SOLUSI:

Compile UHD agar master clock 52MHz

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

GNURadio
GNURadio: Ubuntu Install
GNURadio: Menggunakan UHD
GNURadio: Ubuntu Install GNURadio 3.4.2 RECOMMENDED
GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz RECOMMENDED
GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz NOT RECOMMENDED
GNURadio: Contoh Aplikasi
GNURadio: Spectrum Analizer GSM
GNURadio: Mengubah board RFX1800 menjadi RFX900
GNURadio: Programming Untuk Pemula
OpenBTS: Ubuntu Install RECOMMENDED
OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz RECOMMENDED
OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz NOT RECOMMENDED
OpenBTS: Konfigurasi RECOMMENDED
OpenBTS: Kalibrasi
OpenBTS: Konfigurasi Asterisk untuk OpenBTS RECOMMENDED
OpenBTS: Menjalankan smqueue
OpenBTS: Mengoperasikan BTS RECOMMENDED
OpenBTS: Tampilan di Nokia saat pakai OpenBTS
OpenBTS: Operasi 1800 MHz
OpenBTS: Beberapa Tips
OpenBTS: USRP2
OpenBTS: Amplifier
OpenBTS: SMS
AirProbe

OpenBTS 2.8

GNURadio: Ubuntu 11.10 Install NOT RECOMMENED
GNURadio: Ubuntu 11.10 instalasi menggunakan Repo NOT RECOMMENDED
GNURadio: Download GNURadio
GNURadio: Install UHD
GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0
GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0
GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1 NOT RECOMMENDED
GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2 RECOMMENDED
GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2 RECOMMENDED
GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2 RECOMMENDED
GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2 NOT RECOMMENDED
GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2 RECOMMENDED
GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0 NOT RECOMMENDED
GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2 NOT RECOMMENDED
GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0 NOT RECOMMENDED
GNURadio: Ubuntu 11.10 Install dari GIT GNURadio NOT RECOMMENDED
GNURadio: Ubuntu 11.10 cek USRP Daughter Board
GNURadio: UHD NOT RECOMMENDED
GNURadio: UHD Image NOT RECOMMENDED
GNURadio: UHD burn EEPROM RFX Board di USRP1 NOT RECOMMENDED
GNURadio: UHD Identifikasi Device
OpenBTS: Ubuntu 11.10 Install
OpenBTS: dari GIT ttsou
OpenBTS: 2.8 dari SVN Install
OpenBTS: 2.8 dari SVN Install Clock 52MHz RECOMMENDED
OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10 RECOMMENDED
OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio NOT RECOMMENDED
OpenBTS: 2.8 Edit User di sqlite3.db RECOMMEND
OpenBTS: Yate Softswitch RECOMMENDED
OpenBTS: Yate Softswitch install Ubuntu 12.10 RECOMMENDED
OpenBTS: Yate Softswitch install Ubuntu 13.04 RECOMMENDED
OpenBTS: Yate Config Test
OpenBTS: 2.8 Instalasi Real Time Asterisk RECOMMENDED
OpenBTS: 2.8 Menjalankan RECOMMENDED
OpenBTS: 2.8 Konfigurasi
OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh
OpenBTS: 2.8 Konfigurasi Subscriber Registery
OpenBTS: Database SQLite
OpenBTS: Set SQLite Subscriber Registry secara manual
OpenBTS: Set SQLite parameter smqueue
OpenBTS: FreeSWITCH

Multi OpenBTS 2.8

OpenBTS 3.1.x

OpenBTS: Install UHD untuk USRP1
OpenBTS: UHD Identifikasi Device
OpenBTS: OpenBTS 3.1.3 Compile Tidak bisa untuk USRP1
OpenBTS: Yate Compile

Ettus E110

OpenBTS: E110 Cara Login
OpenBTS: E110 Install Image di MicroSD *RECOMMENDED*
OpenBTS: E110 Cek Daughter Board
OpenBTS: E110 Mengubah Master Clock
OpenBTS: E110 Kalibrasi Clock
OpenBTS: E110 Konfigurasi Jaringan
OpenBTS: E110 Bekerja dengan opkg
OpenBTS: E110 Instalasi iptables
OpenBTS: E110 GNURadio
OpenBTS: E110 Compile UHD Not Recommended
OpenBTS: E110 Compile UHD dari Release Bukan git Not Recommended
OpenBTS: E110 UHD burn EEPROM RFX Board Not Recommended
OpenBTS: E110 Install UHD Image Not Recommended
OpenBTS: E110 Instalasi OpenBTS
OpenBTS: E110 Instalasi OpenBTS 2.6 NOT RECOMMENDED
OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS *RECOMMENDED*
OpenBTS: E110 Yate Softswitch

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

OpenBTS: Briker

FreeSWITCH OpenBTS

OpenBTS: FreeSWITCH

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter

@@ Line 1: / Line 1: @@
-Lakukan [[OpenBTS: E110 Mengubah Master Clock | Ubah Master Clock ke 52MHz]]
+==Persiapan==
+* [[OpenBTS: E110 Install Image di MicroSD | Instal Image E110 e1xx-003-make.tar.bz2 ke MicroSD]]
+* [[OpenBTS: E110 UHD burn EEPROM RFX Board | Lakukan usrp_burn_db_eeprom agar RFX 1800 menjadi RFX 900]]
-==Instalasi Aplikasi Pendukung==
+==Set IP Adddress Statik==
+Edit
-Instal aplikasi pendukung
+ vi /etc/network/interfaces
- opkg update
+Isi dengan
- opkg install libosip2-6 libosip2-dev libortp8 libortp-dev sqlite3
-Jika dibutuhkan kita dapat menset di shell
+ # Wired or wireless interfaces
+ auto eth0
+ # iface eth0 inet dhcp
+ iface eth1 inet dhcp
+ iface eth0 inet static
+ 	address 192.168.0.22
+ 	netmask 255.255.255.0
+ 	network 192.168.0.0
+ 	gateway 192.168.0.222
- setenv PERL5LIB /usr/share/autoconf/Autom4te:/usr/share/automake-1.11/Automake
+==Instalasi Aplikasi Pendukung==
+Instal aplikasi pendukung
+ opkg update
+ opkg install libosip2-dev subversion sqlite3
-==Instalasi OpenBTS==
+Cek sqlite3
-Cek apakah ada [[OpenBTS]]
+ sqlite3 --version
- updatedb &
+Harusnya keluar seperti
- locate openbts
-Kalau tidak ketemu berarti kita perlu instalasi.
+.6.23.1
-==Download OpenBTS==
+==Alternatif Download OpenBTS di PC / Laptop==
 Download di PC [[source code]] [[openbts]] bisa melalui
@@ Line 31: / Line 45: @@
   apt-get install subversion
   svn co http://wush.net/svn/range/software/public openbts-2.8.0
-  scp -r openbts root@<ip-address-E110>
+Kemudian di transfer ke E110
+  scp -r openbts-2.8.0 root@<ip-address-E110>:
 ==Compile OpenBTS==
-Compile menggunakan perintah
+Cara yang lebih mudah untuk download menggunakan wget
-  mv openbts ~/src
+  cd ~/src
-  vi ~/src/openbts/openbts/trunk/apps/OpenBTS.cpp
+ svn co http://wush.net/svn/range/software/public openbts-2.8.0
+  vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp
-pastikan
+pastikan sleep > 5, misalnya
   sleep(8);
@@ Line 46: / Line 64: @@
 lanjutkan proses compile
-  cd ~/src/openbts/openbts/trunk
+ mkdir -p /etc/OpenBTS
-  ./autogen.sh
+ touch /etc/OpenBTS/SubscriberRegistry.db
-  ./configure --with-uhd CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3"
+ touch /etc/OpenBTS/ChannelTable.db
+ touch /etc/OpenBTS/Stats.db
+ touch /etc/OpenBTS/TMSITable.db
+ touch /etc/OpenBTS/Transaction.db
+ touch /etc/OpenBTS/command
+  cd ~/src/openbts-2.8.0/a53/trunk/
+ make
+ make install
+  cd ~/src/openbts-2.8.0/openbts/trunk
+ autoreconf -i
+  ./configure --with-uhd --with-resamp CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3"
   make clean
+ rm -Rf ~/src/openbts-2.8.0/openbts/trunk/apps/transceiver
+ rm -Rf ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M/transceiver
+ cd ~/src/openbts-2.8.0/openbts/trunk
   make
   make install
-  cd ~/src/openbts/openbts/trunk/apps
+  cd ~/src/openbts-2.8.0/openbts/trunk/apps
   ln -s ../Transceiver52M/transceiver .
-Instalasi [[Database]] Konfigurasi [[OpenBTS]]
+ mkdir /var/run/OpenBTS/
+ touch /var/run/OpenBTS/TransactionTable.db
- cd ~/src/openbts/openbts/trunk
- sudo mkdir /etc/OpenBTS
- rm /etc/OpenBTS/OpenBTS.db
- sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db
- .exit
+===Jika Menggunakan RFX 1800 daughter board===
-===Error "assuming TRX is dead"===
+RFX board yang biasanya di beli adalah RFX 1800.
+Sebaiknya di flash EEPROM agar bekerja di 900MHz / menjadi RFX 900,
+jika terpaksa juga menggunakan RFX 1800, kita perlu mengedit
+database konfigurasi [[OpenBTS]] agar beroperasi di '''band 1800MHz channel 860'''
-Di E1xx, transceiver akan lebih lambat dari yang normal [[OpenBTS]]. Oleh karenanya sangat di sarankan agar transceiver load delay di naikan, jika tidak [[OpenBTS]] akan meresponds dengan "assuming TRX is dead" dan exit. Jika ini terjadi, transceiver instance akan tetap running dan akan menyebabkan akses ke [[UHD]] device terhalangi. Patch-nya adalah
+ vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.example.sql
- vi ~/src/openbts/openbts/trunk/apps/OpenBTS.cpp
+Agar
-Edit
+ INSERT INTO "CONFIG" VALUES('GSM.Radio.Band',''''1800'''',1,0,'The GSM operating band.  Valid values are 850 (GSM850), 900 (PGSM900), 1800 (DCS1800) and 1900 (PCS1900).  For most Range models, this value is dictated by the hardware and should not be changed.  Static.');
+ INSERT INTO "CONFIG" VALUES('GSM.Radio.C0',''''860'''',1,0,'The C0 ARFCN.  Also the base ARFCN for a multi-ARFCN configuration.  Static.');
- // Start the transceiver interface.
+Instalasi [[Database]] Konfigurasi [[OpenBTS]]
- // Sleep long enough for the USRP to bootload.
- sleep(5);
-Ubah menjadi
+ cd ~/src/openbts-2.8.0/openbts/trunk
+ sudo mkdir /etc/OpenBTS
+ rm -Rf /etc/OpenBTS/OpenBTS.db
+ sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit"
- sleep(8);
+==Instalasi Subscriber Registry==
-===Error File System Kurang Baik===
+Lakukan
-Kalau microSD yang kita gunakan kurang baik, ada beberapa sector yang Read-only, maka kita akan melihat error di bawah ini.
+ cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
+ sudo mkdir /var/lib/asterisk/
+ sudo mkdir -p /var/lib/asterisk/sqlite3dir
+ sudo rm -Rf /var/lib/asterisk/sqlite3dir/sqlite3.db
+ sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
+==Instalasi Sipauthserve==
- Preparing build ... autom4te: cannot open autom4te.cache/requests: Read-only file system
+Sipauthserve adalah daemon yang memberikan [[SIP]] authentication services. Variabel SIP.Proxy.Registration di [[OpenBTS]] harus menunjuk pada hostname & port Sipauthserve. [[OpenBTS]] harus sudah di buat sebelum membuat Sipauthserve.
- automake: autoconf failed with exit status: 1
- ERROR: automake failed
- rm: cannot remove `COPYING.5934.protect_from_automake.backup': Read-only file  system
- rm: cannot remove `INSTALL.5934.protect_from_automake.backup': Read-only file system
- rm: cannot remove `./config.sub.backup': Read-only file system
- rm: cannot remove `./ltmain.sh.backup': Read-only file system
-'''SOLUSI:'''
+Compile Sipauthserve
-* reboot & ulang proses compile.
-* Kalau tetap gagal, maka kita perlu membuat ulang [[microSD]] tersebut.
-===Error autoreconf===
+ cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
+ make
-Sebaiknya jangan menggunakan autoreconf seperti di bawah ini karena akan meminta perl yang tidak ada di E110.
+Setup [[database]] untuk Sipauthserve
- mv openbts ~/src
- cd ~/src/openbts/openbts/trunk
- autoreconf -i
-Akan keluar error sebagai berikut
+ mkdir /etc/OpenBTS
+ rm -Rf /etc/OpenBTS/sipauthserve.db
+ cd ~/src/openbts-2.8.0/subscriberRegistry/trunk
+ sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"
- can't locate Autom4te/ChannelDefs.pm in @INC (@INC contains: @autom4te_perllibdir@ /etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl   .) at /usr/bin/gnu-configize line 40.
+==Instalasi Smqueue==
- BEGIN failed--compilation aborted at /usr/bin/gnu-configize line 40.
- autoreconf: gnu-configize failed with exit status: 2
-'''SOLUSI:'''
+Smqueue dapat di instalasi dengan melakukan langkah berikut
-* autoreconf -i cukup aman kalau di lakukan di Ubuntu 11.10. Caranya SD card di mount ke ubuntu 11.10, di lakukan di mesin host Ubuntu 11.10 bukan di E110.
-* Alternatif lain menggunakan  ./autogen.sh  kemungkinan berhasil lebih tinggi.
-==Compile Smqueue==
+  cd ~/src/openbts-2.8.0/smqueue/trunk
+  autoreconf -i
-Lakukan
-  cd ~/src/openbts/smqueue/trunk
-  ./autogen.sh
   ./configure
   make clean
@@ Line 126: / Line 149: @@
   make install
-Selanjutnya, inisialisasi konfigurasi database OpenBTS
+Selanjutnya, inisialisasi konfigurasi [[database]] [[OpenBTS]]
-  cd ~/src/openbts/smqueue/trunk
+  cd ~/src/openbts-2.8.0/smqueue/trunk
   rm -Rf /etc/OpenBTS/smqueue.db
-  sudo sqlite3 -init  smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db
+  sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"
- .exit
-===Error saat compile / make Smqueue===
+==Menjalankan OpenBTS==
- make[1]: Entering directory `/home/root/src/openbts/smqueue/trunk/smqueue'
+'''[[OpenBTS: Yate Softswitch | Pastikan Yate sudah di Instalasi.]]'''
- g++ -DHAVE_CONFIG_H -I. -I..  -I../CommonLibs -I../GSM -I../SMS -I../Globals -I../HLR -I../sqlite3  -O3 -g -lpthread -g -O2 -MT smqueue.o -MD -MP -MF .deps/smqueue.Tpo -c -o smqueue.o smqueue.cpp
- smqueue.cpp: In member function 'void SMqueue::SMq::respond_sip_ack(int,  SMqueue::short_msg_pending*, char*, size_t)':
- smqueue.cpp:1910:20: error: invalid conversion from 'int (*)(void*, void**)' to 'int* (*)(void*, void*)'
- smqueue.cpp:1910:20: error:   initializing argument 3 of 'int osip_list_clone(const osip_list_t*, osip_list_t*, int* (*)(void*, void*))'
- make[1]: *** [smqueue.o] Error 1
- make[1]: Leaving directory `/home/root/src/openbts/smqueue/trunk/smqueue'
- make: *** [install-recursive] Error 1
-'''SOLUSI:'''
+Lakukan di tiga (3) windows yang berbeda
-* Belum ada solusi
+ cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/
+ ./sipauthserve &
-==Instalasi Subscriber Registry==
+ mkdir -p /var/lib/OpenBTS
+ touch /var/lib/OpenBTS/smq.cdr
+ cd ~/src/openbts-2.8.0/smqueue/trunk/smqueue/
+ ./smqueue &
-Lakukan
+ cd ~/src/yate
+ rm -Rf /var/log/yate
+ ./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d
-  cd ~/src/openbts/subscriberRegistry/trunk/configFiles
+  mkdir /var/run/OpenBTS/
-  sudo mkdir /var/lib/asterisk/
+  touch /var/run/OpenBTS/TransactionTable.db
-  sudo mkdir /var/lib/asterisk/sqlite3dir
+  cd ~/src/openbts-2.8.0/openbts/trunk/apps
- sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db
+  ./OpenBTS &
-  .exit
-Yang agak repot adalah menginstalasi Asterisk Real Time
+==Edit Konfigurasi==
+ cd ~/src/openbts-2.8.0/openbts/trunk/apps/
+ ./OpenBTSCLI
-===Error di Template Database===
+Parameter yang perlu di ubah
-Naga-naganya masih banyak sekali Error di template [[database]] subscriber registry :(
+ config Control.LUR.OpenRegistration \W+
+ config GSM.Radio.Band 900
+ config GSM.Radio.C0 20
+ config GSM.Identity.MCC 001
+ config GSM.Identity.MNC 01
+ config GSM.Identity.BSIC.NCC 0
+ config GSM.Identity.ShortName OpenBTS
+ config GSM.CellSelection.NCCsPermitted 1
+ config GSM.CellSelection.BSIC.BCC 101
+ config GSM.Identity.LAC 1001
+ config GSM.Identity.CID 101
+ config SIP.Local.IP 192.168.0.22
+ config SIP.Proxy.Registration 192.168.0.3:5064
+ config SIP.Proxy.SMS 192.168.0.3:5063
+ config SIP.Proxy.Speech 192.168.0.3:5060
-  -- Loading resources from subscriberRegistryInit.sql
+  config save
- Error: incomplete SQL: CREATE TABLE 'sip_buddies'
- (
- id                    integer,
- name                  VARCHAR(80) not null,
- context               VARCHAR(80),
- callingpres           VARCHAR(30) DEFAULT 'allowed_not_screened',
- deny                  VARCHAR(95),
- permit                VARCHAR(95),
- secret                VARCHAR(80),
- md5secret             VARCHAR(80),
- remotesecret          VARCHAR(250),
- transport             VARCHAR(10),
- host                  VARCHAR(31) not null,
- nat                   VARCHAR(5) DEFAULT 'no' not null,
- type                  VARCHAR(10) DEFAULT 'friend' not null,
- accountcode           VARCHAR(20),
- amaflags              VARCHAR(13),
- callgroup             VARCHAR(10),
- callerid              VARCHAR(80),
- defaultip             VARCHAR(40) DEFAULT '0.0.0.0',
- dtmfmode              VARCHAR(7) DEFAULT 'rfc2833',
- fromuser              VARCHAR(80),
- fromdomain            VARCHAR(80),
- insecure              VARCHAR(4),
- language              CHAR(2),
- mailbox               VARCHAR(50),
- pickupgroup           VARCHAR(10),
- qualify               CHAR(3),
- regexten              VARCHAR(80),
- rtptimeout            CHAR(3),
- rtpholdtimeout        CHAR(3),
- setvar                VARCHAR(100),
- disallow              VARCHAR(100) DEFAULT 'all',
- allow                 VARCHAR(100) DEFAULT 'ulaw' not null,
- fullcontact           VARCHAR(80),
- ipaddr                VARCHAR(40),
- port                  int(5) DEFAULT 0,
- username              VARCHAR(80),
- defaultuser           VARCHAR(80),
- subscribecontext      VARCHAR(80),
- directmedia           VARCHAR(3),
- trustrpid             VARCHAR(3),
- sendrpid              VARCHAR(3),
- progressinband        VARCHAR(5),
- promiscredir          VARCHAR(3),
- useclientcode         VARCHAR(3),
- callcounter           VARCHAR(3),
- busylevel             int(11),
- allowoverlap          VARCHAR(3) DEFAULT 'yes',
- allowsubscribe        VARCHAR(3) DEFAULT 'yes',
- allowtransfer         VARCHAR(3) DEFAULT 'yes',
- ignoresdpversion      VARCHAR(3) DEFAULT 'no',
- template              VARCHAR(100),
- videosupport          VARCHAR(6) DEFAULT 'no',
- maxcallbitrate        int(11),
- rfc2833compensate     VARCHAR(3) DEFAULT 'yes',
- 'session-timers'      VARCHAR(10) DEFAULT 'accept',
- 'session-expires'     int(6) DEFAULT 1800,
- 'session-minse'       int(6) DEFAULT 90,
- 'session-refresher'   VARCHAR(3) DEFAULT 'uas',
- t38pt_usertpsource    VARCHAR(3),
- outboundproxy         VARCHAR(250),
- callbackextension     VARCHAR(250),
- registertrying        VARCHAR(3) DEFAULT 'yes',
- timert1               int(6) DEFAULT 500,
- timerb                int(9),
- qualifyfreq           int(6) DEFAULT 120,
- contactpermit         VARCHAR(250),
- contactdeny           VARCHAR(250),
- lastms                int(11) DEFAULT 0 not null,
- regserver             VARCHAR(100),
- regseconds            int(11) DEFAULT 0 not null,
- useragent             VARCHAR(100),
- cancallforward        CHAR(3) DEFAULT 'yes' not null,
- canreinvite           CHAR(3) DEFAULT 'yes' not null,
- mask                  VARCHAR(95),
- musiconhold           VARCHAR(100),
- restrictcid           CHAR(3),
- calllimit             int(5),
- WhiteListFlag         timestamp not null default '0',
- WhiteListCode         varchar(8) not null default '0',
- rand                  varchar(33) default '',
- sres                  varchar(33) default '',
- ki                    varchar(33) default '',
- kc                    varchar(33) default '',
- RRLPSupported         int(1) default 1 not null,
- hardware	      VARCHAR(20),
- regTime               INTEGER default 0 NOT NULL"
- a3_a8                 varchar(45) default NULL
- primary key(id)
- )
- ;
+==Debug Transceiver==
-'''SOLUSI:'''
+ cd ~/src/openbts-2.8.0/openbts/trunk/apps/
-* Belum ada solusi
+ ./transceiver DEBUG
-==Instalasi Sipauthserve==
+==Error==
-Sipauthserve adalah daemon yang memberikan [[SIP]] authentication services. Variabel SIP.Proxy.Registration di [[OpenBTS]] harus menunjuk pada hostname & port Sipauthserve. [[OpenBTS]] harus sudah di buat sebelum membuat Sipauthserve.
+===Error SubscriberRegistry===
-Compile Sipauthserve
+ EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file
+ Mar 29 07:26:33 usrp-e1xx openbts: EMERG 1079640064 SubscriberRegistry.cpp:160:init: Cannot open  SubscriberRegistry database: unable to open database file
+ 1333002393.869356 1079640064:
- cd ~/src/openbts/subscriberRegistry/trunk
+'''SOLUSI:'''
- make
-Setup [[database]] untuk Sipauthserve
+Instalasi Subscriber Registry, Lakukan
- rm /etc/OpenBTS/sipauthserve.db
+  cd ~/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
-  cd ~/src/openbts/subscriberRegistry/trunk
+ sudo mkdir /var/lib/asterisk/
-  sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db
+  sudo mkdir -p /var/lib/asterisk/sqlite3dir
- .exit
+ sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
+===Error TX Dead===
+ ALERT 1089582176 TRXManager.cpp:92:clockHandler: TRX clock interface timed out, assuming TRX is dead.
-==Menjalankan OpenBTS==
+'''SOLUSI:'''
- cd ~/src/openbts/openbts/trunk/apps/
+* Naikan sleep() di OpenBTS.cpp & compile ulang
- ./OpenBTS
-Bisa keluar
+ vi ~/src/openbts-2.8.0/openbts/trunk/apps/OpenBTS.cpp
-  OpenBTS> version
+  sleep(8);
- release P2.8TRUNK built Mar  3 2012
+* '''SEBAIKNYA:''' [[OpenBTS: E110 UHD burn EEPROM RFX Board | Gunakan RFX900. Burn EEPROM di RFX1800 agar menjadi RFX900]]
+* Jika terpaksa menggunakan RFX 1800, edit OpenBTS.example.sql agar menggunakan frekuensi 1800 & ARFCN 800-an.
+* Restart OpenBTS
-===Error waktu Start===
+ killall transceiver
+ cd ~/src/openbts-2.8.0/openbts/trunk/apps
+ ./OpenBTS &
- ALERT 1088898144 TRXManager.cpp:86:clockHandler: TRX clock interface timed out, assuming TRX is dead.
+===Error set_rates===
- Aborted
-Biasanya setelah itu terjadi maka kalau di cek
+Saat
-  uhd_usrp_probe
+  cd ~/src/openbts-2.8.0/openbts/trunk/Transceiver52M
+ ./USRPping
-Hasilnya
+Error
-  -- Opening device node /dev/usrp_e0...
+  ALERT 1075093504 UHDDevice.cpp:357:set_rates: Actual sample rate differs from desired rate
- Error: EnvironmentError: IOError: Failed to open /dev/usrp_e0
 '''SOLUSI:'''
-Edit
+[[OpenBTS: E110 Mengubah Master Clock | Compile UHD agar master clock 52MHz]]
- vi ~/src/openbts/openbts/trunk/apps/OpenBTS.cpp
-Edit
- // Start the transceiver interface.
- // Sleep long enough for the USRP to bootload.
- sleep(5);
-Ubah menjadi
- sleep(8);
-Lakukan ini sebelum mengcompile [[openbts]]
 ==Referensi==
@@ Line 332: / Line 269: @@
 * [[OpenBTS]]
+* [[OpenBTS: Arsitektur secara umum]]
 ===Persiapan===
@@ Line 339: / Line 277: @@
 * [[USRP: Kalibrasi ClockTamer]]
 * [[USRP: ClockTamer Control Protocol]]
+* [[USRP: ClockTamer Flashing]]
 * [[USRP: Instalasi Board]]
 * [[OpenBTS: GIT Source Code]]
 * [[USRP: Rangkaian Board USRP]]
 * [[OpenBTS: Tethr untuk Bencana Alam]]
+* [[USRP: Tip Pemesanan]]
+===Script===
+* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
+* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
+* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
+* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
 ===OpenBTS 2.6===
@@ Line 351: / Line 298: @@
 * [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
 * [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED''
 * [[GNURadio: Contoh Aplikasi]]
 * [[GNURadio: Spectrum Analizer GSM]]
@@ Line 357: / Line 305: @@
 * [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
 * [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
+* [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED''
 * [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
 * [[OpenBTS: Kalibrasi]]
@@ Line 377: / Line 326: @@
 * [[GNURadio: Install UHD]]
 * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
+* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]]
+* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED''
 * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 * [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
+* [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED''
+* [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
 * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
 * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
@@ Line 384: / Line 338: @@
 * [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
 * [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
-* [[GNURadio: UHD]]
+* [[GNURadio: UHD]] ''NOT RECOMMENDED''
-* [[GNURadio: UHD Image]]
+* [[GNURadio: UHD Image]] ''NOT RECOMMENDED''
+* [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED''
 * [[GNURadio: UHD Identifikasi Device]]
 * [[OpenBTS: Ubuntu 11.10 Install]]
@@ Line 391: / Line 346: @@
 * [[OpenBTS: 2.8 dari SVN Install]]
 * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
+* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 * [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
-* [[OpenBTS: Yate Softswitch]]
+* [[OpenBTS: Yate Softswitch]] '''RECOMMENDED'''
+* [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED'''
+* [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED'''
 * [[OpenBTS: Yate Config Test]]
 * [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 * [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 * [[OpenBTS: 2.8 Konfigurasi]]
+* [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]]
 * [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 * [[OpenBTS: Database SQLite]]
+* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
+* [[OpenBTS: Set SQLite parameter smqueue]]
+* [[OpenBTS: FreeSWITCH]]
 ===Multi OpenBTS 2.8===
-* [[OpenBTS: Pola Multi OpenBTS]]
+* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
+* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
+* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
+* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
+* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
+* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
+* [[Multi OpenBTS: Catatan BCCH]]
+* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
+===OpenBTS 3.1.x===
+* [[OpenBTS: Install UHD untuk USRP1]]
+* [[OpenBTS: UHD Identifikasi Device]]
+* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
+* [[OpenBTS: Yate Compile]]
 ===Ettus E110===
 * [[OpenBTS: E110 Cara Login]]
-* [[OpenBTS: E110 Install Image di MicroSD]]
+* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 * [[OpenBTS: E110 Cek Daughter Board]]
 * [[OpenBTS: E110 Mengubah Master Clock]]
 * [[OpenBTS: E110 Kalibrasi Clock]]
+* [[OpenBTS: E110 Konfigurasi Jaringan]]
 * [[OpenBTS: E110 Bekerja dengan opkg]]
+* [[OpenBTS: E110 Instalasi iptables]]
 * [[OpenBTS: E110 GNURadio]]
-* [[OpenBTS: E110 Install UHD Image]]
+* [[OpenBTS: E110 Compile UHD]] ''Not Recommended''
+* [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended''
+* [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended''
+* [[OpenBTS: E110 Install UHD Image]] ''Not Recommended''
 * [[OpenBTS: E110 Instalasi OpenBTS]]
 * [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
+* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
+* [[OpenBTS: E110 Yate Softswitch]]
+===Ettus N210===
+* [[OpenBTS: N210 Instalasi GPSDO Kit]]
+* [[OpenBTS: N210 GNURadio]]
+* [[OpenBTS: N210 GNURadio 3.7.0]]
+* [[OpenBTS: N210 Instalasi OpenBTS]]
+* [[OpenBTS: N210 Instalasi Yate]]
+* [[OpenBTS: N210 Yate Config Test]]
+* [[OpenBTS: N210 Burn Firmware]]
+===RangeNetworks===
+* [[OpenBTS: RangeNetwork Foto]]
+* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
+* [[OpenBTS: RangeNetwork Default Setting]]
+* [[OpenBTS: RangeNetwork Instalasi UHD]]
+* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
+* [[OpenBTS: RangeNetwork Compile]]
+* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
+* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
+* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
+* [[OpenBTS: RangeNetwork Web Interface]]
+* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
+* [[OpenBTS: RangeNetwork Audit]]
+* [[VoIP: Trunk]]
+===GPRS===
+* [[OpenBTS: GPRS]]
+* [[OpenBTS: GPRS Konfigurasi]]
+* [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]]
+===Briker OpenBTS===
+* [[OpenBTS: Briker]]
+===FreeSWITCH OpenBTS===
+* [[OpenBTS: FreeSWITCH]]
 ===Power Amplifier===
@@ Line 422: / Line 448: @@
 * [[Power Amplifier 900MHz]]
 * [[Duplexer]]
+* [[OpenBTS: Menaikan Jangkauan OpenBTS]]
 ===Lain Lain===
@@ Line 452: / Line 479: @@
 * [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
 * [[OpenBTS: Daftar Artikel di Media]]
+* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
+* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
+* [[OpenBTS: Beroperasi di Papua]]
 ===Dokumentasi Video===
+* http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
 * http://youtu.be/8ogOcUSpINU (1/6)
 * http://youtu.be/F5d7HGuhppk (2/6)
@@ Line 461: / Line 492: @@
 * http://youtu.be/6LCuoeI57ak (5/6)
 * http://youtu.be/-dEqcHoIlYk (6/6)
+* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
+===Perjuangan OpenBTS===
+* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 [[Category: Wireless]]
 [[Category: Selular]]

Difference between revisions of "OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS"

Latest revision as of 06:03, 11 March 2014

Persiapan

Set IP Adddress Statik

Instalasi Aplikasi Pendukung

Alternatif Download OpenBTS di PC / Laptop

Compile OpenBTS

Jika Menggunakan RFX 1800 daughter board

Instalasi Subscriber Registry

Instalasi Sipauthserve

Instalasi Smqueue

Menjalankan OpenBTS

Edit Konfigurasi

Debug Transceiver

Error

Error SubscriberRegistry

Error TX Dead

Error set_rates

Referensi

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Navigation menu

Search