Difference between revisions of "OpenBTS: E110 Kalibrasi Clock"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
(42 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | ==Download== | + | ==Download ttsou Kal== |
+ | |||
+ | Download dari mesin lain & scp ke E110 | ||
+ | |||
+ | https://github.com/ttsou/kalibrate-uhd/zipball/master | ||
+ | cd ~/Downloads | ||
+ | scp ttsou-kalibrate-uhd-8200e28.zip root@192.168.0.148: | ||
+ | |||
+ | Atau via git (kadang gagal sih ini) | ||
+ | |||
+ | cd ~/src | ||
+ | git clone git://github.com/ttsou/kalibrate-uhd.git kalibrate-uhd | ||
+ | |||
+ | ==Compile FFTW3== | ||
Download dari | Download dari | ||
+ | http://www.fftw.org/download.html | ||
+ | |||
+ | Lakukan | ||
+ | |||
+ | mv fftw-3.3.2.tar.gz ~/src | ||
cd ~/src | cd ~/src | ||
− | + | tar zxvf fftw-3.3.2.tar.gz | |
+ | cd ~/src/fftw-3.3.2 | ||
+ | ./configure --enable-float --enable-sse --enable-shared --disable-static | ||
+ | make clean | ||
+ | make | ||
+ | make all | ||
+ | make check | ||
+ | make install | ||
+ | ldconfig | ||
+ | |||
+ | ===Alternatif Lain=== | ||
+ | Install dari repo | ||
+ | |||
+ | opkg update | ||
+ | opkg install libfftw3 | ||
+ | |||
+ | ===Referensi=== | ||
+ | |||
+ | * http://gnuradio.org/redmine/projects/gnuradio/wiki/FFTWInstall | ||
==Compile== | ==Compile== | ||
− | opkg remove | + | Jika di download via web |
− | opkg install | + | |
− | cd ~/ | + | opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native |
+ | opkg install fftwf fftwf-dev task-sdk-gnuradio-native | ||
+ | cd ~ | ||
+ | mv ttsou-kalibrate-uhd-8200e28.zip src/ | ||
+ | cd src | ||
+ | unzip ttsou-kalibrate-uhd-8200e28.zip | ||
+ | cd ~/src/ttsou-kalibrate-uhd-8200e28 | ||
./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make | ./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make | ||
− | == | + | |
+ | Jika di download via git | ||
+ | |||
+ | opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native | ||
+ | opkg install fftwf fftwf-dev task-sdk-gnuradio-native | ||
+ | cd ~/src/kalibrate-uhd | ||
+ | ./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make | ||
+ | |||
+ | |||
+ | ===Error fftw3=== | ||
+ | |||
+ | Saat ./configure keluar error | ||
+ | |||
+ | checking for FFTW3... configure: error: Package requirements (fftw3 >= 3.0) were not met: | ||
+ | |||
+ | No package 'fftw3' found | ||
+ | |||
+ | Consider adjusting the PKG_CONFIG_PATH environment variable if you | ||
+ | installed software in a non-standard prefix. | ||
+ | |||
+ | Alternatively, you may set the environment variables FFTW3_CFLAGS | ||
+ | and FFTW3_LIBS to avoid the need to call pkg-config. | ||
+ | See the pkg-config man page for more details. | ||
+ | |||
+ | |||
+ | '''SOLUSI:''' | ||
+ | |||
+ | Mungkin dengan -fPIC dalam CFLAGS jadi | ||
+ | |||
+ | cd ~/src/kalibrate-uhd | ||
+ | ./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make | ||
+ | |||
+ | Alternatif lain, install source fftw3 dari http://www.fftw.org/download.html | ||
+ | |||
+ | ==Melakukan Kalibrasi== | ||
+ | |||
+ | Gunakan Kalibrate atau Kalibrate-UHD untuk mengukur offset frekuensi, | ||
+ | |||
+ | [root@openBTS kal-0.2]# ./kal -f 946600000 -u | ||
+ | USRP side: B | ||
+ | FPGA clock: 52000000 | ||
+ | Decimation: 192 | ||
+ | Antenna: RX2 | ||
+ | Sample rate: 270833.343750 | ||
+ | average [min, max] (range, stddev) | ||
+ | 501.351685 [461, 546] (85, 19.314581) | ||
+ | overruns: 0 | ||
+ | not found: 0 | ||
==Referensi== | ==Referensi== | ||
+ | * http://ttsou.github.com/kalibrate-uhd/ | ||
+ | * https://github.com/ttsou/kalibrate-uhd | ||
* http://gnuradio.org/redmine/wiki/1/OpenBTSClockCalibration | * http://gnuradio.org/redmine/wiki/1/OpenBTSClockCalibration | ||
* http://sourceforge.net/mailarchive/attachment.php?list_name=openbts-discuss&message_id=3d032e5d0911101431o5bb31844mdfe80ae4fc9789ea@mail.gmail.com&counter=1 | * http://sourceforge.net/mailarchive/attachment.php?list_name=openbts-discuss&message_id=3d032e5d0911101431o5bb31844mdfe80ae4fc9789ea@mail.gmail.com&counter=1 | ||
* http://thre.at/kalibrate/ | * http://thre.at/kalibrate/ | ||
* http://thre.at/kalibrate/#install | * http://thre.at/kalibrate/#install | ||
− | * http:// | + | * http://gnuradio.org/redmine/projects/gnuradio/wiki/FFTWInstall |
− | |||
==Pranala Menarik== | ==Pranala Menarik== | ||
* [[OpenBTS]] | * [[OpenBTS]] | ||
+ | * [[OpenBTS: Arsitektur secara umum]] | ||
===Persiapan=== | ===Persiapan=== | ||
Line 33: | Line 124: | ||
* [[USRP: Menyambungkan ClockTamer ke USRP1]] | * [[USRP: Menyambungkan ClockTamer ke USRP1]] | ||
* [[USRP: Kalibrasi ClockTamer]] | * [[USRP: Kalibrasi ClockTamer]] | ||
+ | * [[USRP: ClockTamer Control Protocol]] | ||
+ | * [[USRP: ClockTamer Flashing]] | ||
* [[USRP: Instalasi Board]] | * [[USRP: Instalasi Board]] | ||
* [[OpenBTS: GIT Source Code]] | * [[OpenBTS: GIT Source Code]] | ||
+ | * [[USRP: Rangkaian Board USRP]] | ||
+ | * [[OpenBTS: Tethr untuk Bencana Alam]] | ||
+ | * [[USRP: Tip Pemesanan]] | ||
+ | |||
+ | ===Script=== | ||
+ | |||
+ | * [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]] | ||
+ | * [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]] | ||
+ | * [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]] | ||
+ | * [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]] | ||
===OpenBTS 2.6=== | ===OpenBTS 2.6=== | ||
Line 40: | Line 143: | ||
* [[GNURadio]] | * [[GNURadio]] | ||
* [[GNURadio: Ubuntu Install]] | * [[GNURadio: Ubuntu Install]] | ||
− | * [[GNURadio: Ubuntu Install GNURadio 3.4.2]] | + | * [[GNURadio: Menggunakan UHD]] |
+ | * [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz]] ''NOT RECOMMENDED'' | ||
* [[GNURadio: Contoh Aplikasi]] | * [[GNURadio: Contoh Aplikasi]] | ||
* [[GNURadio: Spectrum Analizer GSM]] | * [[GNURadio: Spectrum Analizer GSM]] | ||
* [[GNURadio: Mengubah board RFX1800 menjadi RFX900]] | * [[GNURadio: Mengubah board RFX1800 menjadi RFX900]] | ||
* [[GNURadio: Programming Untuk Pemula]] | * [[GNURadio: Programming Untuk Pemula]] | ||
− | * [[OpenBTS: Ubuntu Install]] | + | * [[OpenBTS: Ubuntu Install]] '''RECOMMENDED''' |
− | * [[OpenBTS: Konfigurasi]] | + | * [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED''' |
+ | * [[OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz]] ''NOT RECOMMENDED'' | ||
+ | * [[OpenBTS: Konfigurasi]] '''RECOMMENDED''' | ||
* [[OpenBTS: Kalibrasi]] | * [[OpenBTS: Kalibrasi]] | ||
− | * [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] | + | * [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED''' |
* [[OpenBTS: Menjalankan smqueue]] | * [[OpenBTS: Menjalankan smqueue]] | ||
− | * [[OpenBTS: Mengoperasikan BTS]] | + | * [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED''' |
* [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]] | * [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]] | ||
* [[OpenBTS: Operasi 1800 MHz]] | * [[OpenBTS: Operasi 1800 MHz]] | ||
Line 61: | Line 169: | ||
===OpenBTS 2.8=== | ===OpenBTS 2.8=== | ||
− | * [[GNURadio: Ubuntu 11.10 Install]] '' | + | * [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED'' |
− | * [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] | + | * [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED'' |
+ | * [[GNURadio: Download GNURadio]] | ||
+ | * [[GNURadio: Install UHD]] | ||
* [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]] | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]] | ||
− | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] | + | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0]] |
− | * [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] | + | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1]] ''NOT RECOMMENDED'' |
+ | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2]] '''RECOMMENDED''' | ||
+ | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]] | ||
+ | * [[GNURadio: UHD]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: UHD Image]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: UHD burn EEPROM RFX Board di USRP1]] ''NOT RECOMMENDED'' | ||
+ | * [[GNURadio: UHD Identifikasi Device]] | ||
* [[OpenBTS: Ubuntu 11.10 Install]] | * [[OpenBTS: Ubuntu 11.10 Install]] | ||
− | * [[OpenBTS: 2.8 dari SVN Install]] '''RECOMMENDED''' | + | * [[OpenBTS: dari GIT ttsou]] |
− | * [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] | + | * [[OpenBTS: 2.8 dari SVN Install]] |
+ | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED'' | ||
+ | * [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND''' | ||
+ | * [[OpenBTS: Yate Softswitch]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: Yate Softswitch install Ubuntu 12.10]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: Yate Softswitch install Ubuntu 13.04]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: Yate Config Test]] | ||
+ | * [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED''' | ||
+ | * [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED''' | ||
* [[OpenBTS: 2.8 Konfigurasi]] | * [[OpenBTS: 2.8 Konfigurasi]] | ||
+ | * [[OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh]] | ||
+ | * [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]] | ||
* [[OpenBTS: Database SQLite]] | * [[OpenBTS: Database SQLite]] | ||
+ | * [[OpenBTS: Set SQLite Subscriber Registry secara manual]] | ||
+ | * [[OpenBTS: Set SQLite parameter smqueue]] | ||
+ | * [[OpenBTS: FreeSWITCH]] | ||
+ | |||
+ | ===Multi OpenBTS 2.8=== | ||
+ | |||
+ | * [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED''' | ||
+ | * [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED''' | ||
+ | * [[Multi OpenBTS: Catatan BSIC=NCC+BCC]] | ||
+ | * [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]] | ||
+ | * [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]] | ||
+ | * [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]] | ||
+ | * [[Multi OpenBTS: Catatan BCCH]] | ||
+ | * [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]] | ||
+ | |||
+ | ===OpenBTS 3.1.x=== | ||
+ | |||
+ | * [[OpenBTS: Install UHD untuk USRP1]] | ||
+ | * [[OpenBTS: UHD Identifikasi Device]] | ||
+ | * [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1''' | ||
+ | * [[OpenBTS: Yate Compile]] | ||
===Ettus E110=== | ===Ettus E110=== | ||
* [[OpenBTS: E110 Cara Login]] | * [[OpenBTS: E110 Cara Login]] | ||
− | * [[OpenBTS: E110 Install Image di MicroSD]] | + | * [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*''' |
* [[OpenBTS: E110 Cek Daughter Board]] | * [[OpenBTS: E110 Cek Daughter Board]] | ||
* [[OpenBTS: E110 Mengubah Master Clock]] | * [[OpenBTS: E110 Mengubah Master Clock]] | ||
* [[OpenBTS: E110 Kalibrasi Clock]] | * [[OpenBTS: E110 Kalibrasi Clock]] | ||
+ | * [[OpenBTS: E110 Konfigurasi Jaringan]] | ||
* [[OpenBTS: E110 Bekerja dengan opkg]] | * [[OpenBTS: E110 Bekerja dengan opkg]] | ||
+ | * [[OpenBTS: E110 Instalasi iptables]] | ||
* [[OpenBTS: E110 GNURadio]] | * [[OpenBTS: E110 GNURadio]] | ||
+ | * [[OpenBTS: E110 Compile UHD]] ''Not Recommended'' | ||
+ | * [[OpenBTS: E110 Compile UHD dari Release Bukan git]] ''Not Recommended'' | ||
+ | * [[OpenBTS: E110 UHD burn EEPROM RFX Board]] ''Not Recommended'' | ||
+ | * [[OpenBTS: E110 Install UHD Image]] ''Not Recommended'' | ||
* [[OpenBTS: E110 Instalasi OpenBTS]] | * [[OpenBTS: E110 Instalasi OpenBTS]] | ||
− | * [[OpenBTS: E110 Instalasi OpenBTS 2.6]] '''* | + | * [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED'' |
+ | * [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*''' | ||
+ | * [[OpenBTS: E110 Yate Softswitch]] | ||
+ | |||
+ | ===Ettus N210=== | ||
+ | |||
+ | * [[OpenBTS: N210 Instalasi GPSDO Kit]] | ||
+ | * [[OpenBTS: N210 GNURadio]] | ||
+ | * [[OpenBTS: N210 GNURadio 3.7.0]] | ||
+ | * [[OpenBTS: N210 Instalasi OpenBTS]] | ||
+ | * [[OpenBTS: N210 Instalasi Yate]] | ||
+ | * [[OpenBTS: N210 Yate Config Test]] | ||
+ | * [[OpenBTS: N210 Burn Firmware]] | ||
+ | |||
+ | ===RangeNetworks=== | ||
+ | |||
+ | * [[OpenBTS: RangeNetwork Foto]] | ||
+ | * [[OpenBTS: RangeNetwork menggunakan USB recovery image]] | ||
+ | * [[OpenBTS: RangeNetwork Default Setting]] | ||
+ | * [[OpenBTS: RangeNetwork Instalasi UHD]] | ||
+ | * [[OpenBTS: RangeNetwork Compile GNURadio UHD]] | ||
+ | * [[OpenBTS: RangeNetwork Compile]] | ||
+ | * [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]] | ||
+ | * [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]] | ||
+ | * [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*''' | ||
+ | * [[OpenBTS: RangeNetwork Web Interface]] | ||
+ | * [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]] | ||
+ | * [[OpenBTS: RangeNetwork Audit]] | ||
+ | * [[VoIP: Trunk]] | ||
+ | |||
+ | ===GPRS=== | ||
+ | |||
+ | * [[OpenBTS: GPRS]] | ||
+ | * [[OpenBTS: GPRS Konfigurasi]] | ||
+ | * [[OpenBTS: GPRS untuk dibelakang Router dengan NAT]] | ||
+ | |||
+ | ===Briker OpenBTS=== | ||
+ | |||
+ | * [[OpenBTS: Briker]] | ||
+ | |||
+ | ===FreeSWITCH OpenBTS=== | ||
+ | |||
+ | * [[OpenBTS: FreeSWITCH]] | ||
+ | |||
+ | ===Power Amplifier=== | ||
+ | |||
+ | * [[Driver 900MHz]] | ||
+ | * [[Power Amplifier 900MHz]] | ||
+ | * [[Duplexer]] | ||
+ | * [[OpenBTS: Menaikan Jangkauan OpenBTS]] | ||
===Lain Lain=== | ===Lain Lain=== | ||
+ | * [[OpenBTS: Materi Magang di ICTWATCH]] | ||
+ | * [[OpenBTS: Seminar Outline]] | ||
+ | * [[OpenBTS: Workshop Outline]] | ||
* [[Membuat Base Station GSM Open Source]] | * [[Membuat Base Station GSM Open Source]] | ||
* [[Teknologi Selular]] | * [[Teknologi Selular]] | ||
Line 101: | Line 318: | ||
* [[Siapa Bilang OpenBTS Ilegal?]] | * [[Siapa Bilang OpenBTS Ilegal?]] | ||
* [[OpenBTS: Catatan MNC dan MCC Indonesia]] | * [[OpenBTS: Catatan MNC dan MCC Indonesia]] | ||
+ | * [[OpenBTS: Catatan MNC dan MCC COOL]] | ||
* [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]] | * [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]] | ||
+ | * [[GSM: Daftar Channel Frekuensi]] | ||
===Catatan Sejarah=== | ===Catatan Sejarah=== | ||
Line 108: | Line 327: | ||
* [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]] | * [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]] | ||
* [[OpenBTS: Daftar Artikel di Media]] | * [[OpenBTS: Daftar Artikel di Media]] | ||
+ | * [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]] | ||
+ | * [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]] | ||
+ | * [[OpenBTS: Beroperasi di Papua]] | ||
+ | |||
+ | ===Dokumentasi Video=== | ||
+ | |||
+ | * http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS | ||
+ | * http://youtu.be/8ogOcUSpINU (1/6) | ||
+ | * http://youtu.be/F5d7HGuhppk (2/6) | ||
+ | * http://youtu.be/90Jgq6bOgrQ (3/6) | ||
+ | * http://youtu.be/cNkx_qNqdfc (4/6) | ||
+ | * http://youtu.be/6LCuoeI57ak (5/6) | ||
+ | * http://youtu.be/-dEqcHoIlYk (6/6) | ||
+ | * http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share | ||
+ | |||
+ | ===Perjuangan OpenBTS=== | ||
+ | |||
+ | * http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter | ||
+ | |||
+ | |||
[[Category: Wireless]] | [[Category: Wireless]] | ||
[[Category: Selular]] | [[Category: Selular]] |
Latest revision as of 06:00, 11 March 2014
Download ttsou Kal
Download dari mesin lain & scp ke E110
https://github.com/ttsou/kalibrate-uhd/zipball/master cd ~/Downloads scp ttsou-kalibrate-uhd-8200e28.zip root@192.168.0.148:
Atau via git (kadang gagal sih ini)
cd ~/src git clone git://github.com/ttsou/kalibrate-uhd.git kalibrate-uhd
Compile FFTW3
Download dari
http://www.fftw.org/download.html
Lakukan
mv fftw-3.3.2.tar.gz ~/src cd ~/src tar zxvf fftw-3.3.2.tar.gz cd ~/src/fftw-3.3.2 ./configure --enable-float --enable-sse --enable-shared --disable-static make clean make make all make check make install ldconfig
Alternatif Lain
Install dari repo
opkg update opkg install libfftw3
Referensi
Compile
Jika di download via web
opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native opkg install fftwf fftwf-dev task-sdk-gnuradio-native cd ~ mv ttsou-kalibrate-uhd-8200e28.zip src/ cd src unzip ttsou-kalibrate-uhd-8200e28.zip cd ~/src/ttsou-kalibrate-uhd-8200e28 ./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make
Jika di download via git
opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native opkg install fftwf fftwf-dev task-sdk-gnuradio-native cd ~/src/kalibrate-uhd ./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make
Error fftw3
Saat ./configure keluar error
checking for FFTW3... configure: error: Package requirements (fftw3 >= 3.0) were not met: No package 'fftw3' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables FFTW3_CFLAGS and FFTW3_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
SOLUSI:
Mungkin dengan -fPIC dalam CFLAGS jadi
cd ~/src/kalibrate-uhd ./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make
Alternatif lain, install source fftw3 dari http://www.fftw.org/download.html
Melakukan Kalibrasi
Gunakan Kalibrate atau Kalibrate-UHD untuk mengukur offset frekuensi,
[root@openBTS kal-0.2]# ./kal -f 946600000 -u USRP side: B FPGA clock: 52000000 Decimation: 192 Antenna: RX2 Sample rate: 270833.343750 average [min, max] (range, stddev) 501.351685 [461, 546] (85, 19.314581) overruns: 0 not found: 0
Referensi
- http://ttsou.github.com/kalibrate-uhd/
- https://github.com/ttsou/kalibrate-uhd
- http://gnuradio.org/redmine/wiki/1/OpenBTSClockCalibration
- http://sourceforge.net/mailarchive/attachment.php?list_name=openbts-discuss&message_id=3d032e5d0911101431o5bb31844mdfe80ae4fc9789ea@mail.gmail.com&counter=1
- http://thre.at/kalibrate/
- http://thre.at/kalibrate/#install
- http://gnuradio.org/redmine/projects/gnuradio/wiki/FFTWInstall
Pranala Menarik
Persiapan
- USRP: High Precision Clock
- USRP: Menyambungkan ClockTamer ke USRP1
- USRP: Kalibrasi ClockTamer
- USRP: ClockTamer Control Protocol
- USRP: ClockTamer Flashing
- USRP: Instalasi Board
- OpenBTS: GIT Source Code
- USRP: Rangkaian Board USRP
- OpenBTS: Tethr untuk Bencana Alam
- USRP: Tip Pemesanan
Script
- OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04
- OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04
- OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit
- OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit
OpenBTS 2.6
- GNURadio
- GNURadio: Ubuntu Install
- GNURadio: Menggunakan UHD
- GNURadio: Ubuntu Install GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz RECOMMENDED
- GNURadio: Ubuntu 13.04 Install GNURadio 3.4.2 Clock 52MHz NOT RECOMMENDED
- GNURadio: Contoh Aplikasi
- GNURadio: Spectrum Analizer GSM
- GNURadio: Mengubah board RFX1800 menjadi RFX900
- GNURadio: Programming Untuk Pemula
- OpenBTS: Ubuntu Install RECOMMENDED
- OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz RECOMMENDED
- OpenBTS: Ubuntu 13.04 Install OpenBTS 2.6 Clock 52MHz NOT RECOMMENDED
- OpenBTS: Konfigurasi RECOMMENDED
- OpenBTS: Kalibrasi
- OpenBTS: Konfigurasi Asterisk untuk OpenBTS RECOMMENDED
- OpenBTS: Menjalankan smqueue
- OpenBTS: Mengoperasikan BTS RECOMMENDED
- OpenBTS: Tampilan di Nokia saat pakai OpenBTS
- OpenBTS: Operasi 1800 MHz
- OpenBTS: Beberapa Tips
- OpenBTS: USRP2
- OpenBTS: Amplifier
- OpenBTS: SMS
- AirProbe
OpenBTS 2.8
- GNURadio: Ubuntu 11.10 Install NOT RECOMMENED
- GNURadio: Ubuntu 11.10 instalasi menggunakan Repo NOT RECOMMENDED
- GNURadio: Download GNURadio
- GNURadio: Install UHD
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.3.0
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.1 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.04.1 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 12.10 Instal GNURadio 3.4.2 NOT RECOMMENDED
- GNURadio: Ubuntu 13.04 Instal GNURadio 3.4.2 RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0 NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 Install dari GIT GNURadio NOT RECOMMENDED
- GNURadio: Ubuntu 11.10 cek USRP Daughter Board
- GNURadio: UHD NOT RECOMMENDED
- GNURadio: UHD Image NOT RECOMMENDED
- GNURadio: UHD burn EEPROM RFX Board di USRP1 NOT RECOMMENDED
- GNURadio: UHD Identifikasi Device
- OpenBTS: Ubuntu 11.10 Install
- OpenBTS: dari GIT ttsou
- OpenBTS: 2.8 dari SVN Install
- OpenBTS: 2.8 dari SVN Install Clock 52MHz RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10 RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
- OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04 RECOMMENDED
- OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio NOT RECOMMENDED
- OpenBTS: 2.8 Edit User di sqlite3.db RECOMMEND
- OpenBTS: Yate Softswitch RECOMMENDED
- OpenBTS: Yate Softswitch install Ubuntu 12.10 RECOMMENDED
- OpenBTS: Yate Softswitch install Ubuntu 13.04 RECOMMENDED
- OpenBTS: Yate Config Test
- OpenBTS: 2.8 Instalasi Real Time Asterisk RECOMMENDED
- OpenBTS: 2.8 Menjalankan RECOMMENDED
- OpenBTS: 2.8 Konfigurasi
- OpenBTS: 2.8 Konfigurasi Cognitive Radio Elsabagh
- OpenBTS: 2.8 Konfigurasi Subscriber Registery
- OpenBTS: Database SQLite
- OpenBTS: Set SQLite Subscriber Registry secara manual
- OpenBTS: Set SQLite parameter smqueue
- OpenBTS: FreeSWITCH
Multi OpenBTS 2.8
- OpenBTS: Pola Multi OpenBTS RECOMMENDED
- Multi OpenBTS: Catatan Konfigurasi RECOMMENDED
- Multi OpenBTS: Catatan BSIC=NCC+BCC
- Multi OpenBTS: Catatan Frekuensi Planning di GSM
- Multi OpenBTS: Catatan BTS Color Code BCC di GSM
- Multi OpenBTS: Catatan Network Color Code NCC di GSM
- Multi OpenBTS: Catatan BCCH
- Multi OpenBTS: Catatan Public Land Mobile Network PLMN
OpenBTS 3.1.x
- OpenBTS: Install UHD untuk USRP1
- OpenBTS: UHD Identifikasi Device
- OpenBTS: OpenBTS 3.1.3 Compile Tidak bisa untuk USRP1
- OpenBTS: Yate Compile
Ettus E110
- OpenBTS: E110 Cara Login
- OpenBTS: E110 Install Image di MicroSD *RECOMMENDED*
- OpenBTS: E110 Cek Daughter Board
- OpenBTS: E110 Mengubah Master Clock
- OpenBTS: E110 Kalibrasi Clock
- OpenBTS: E110 Konfigurasi Jaringan
- OpenBTS: E110 Bekerja dengan opkg
- OpenBTS: E110 Instalasi iptables
- OpenBTS: E110 GNURadio
- OpenBTS: E110 Compile UHD Not Recommended
- OpenBTS: E110 Compile UHD dari Release Bukan git Not Recommended
- OpenBTS: E110 UHD burn EEPROM RFX Board Not Recommended
- OpenBTS: E110 Install UHD Image Not Recommended
- OpenBTS: E110 Instalasi OpenBTS
- OpenBTS: E110 Instalasi OpenBTS 2.6 NOT RECOMMENDED
- OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS *RECOMMENDED*
- OpenBTS: E110 Yate Softswitch
Ettus N210
- OpenBTS: N210 Instalasi GPSDO Kit
- OpenBTS: N210 GNURadio
- OpenBTS: N210 GNURadio 3.7.0
- OpenBTS: N210 Instalasi OpenBTS
- OpenBTS: N210 Instalasi Yate
- OpenBTS: N210 Yate Config Test
- OpenBTS: N210 Burn Firmware
RangeNetworks
- OpenBTS: RangeNetwork Foto
- OpenBTS: RangeNetwork menggunakan USB recovery image
- OpenBTS: RangeNetwork Default Setting
- OpenBTS: RangeNetwork Instalasi UHD
- OpenBTS: RangeNetwork Compile GNURadio UHD
- OpenBTS: RangeNetwork Compile
- OpenBTS: RangeNetwork Compile OpenBTS 2.8.0
- OpenBTS: RangeNetwork Compile OpenBTS 3.1.3
- OpenBTS: RangeNetwork Yate Compile *RECOMMENDED*
- OpenBTS: RangeNetwork Web Interface
- OpenBTS: RangeNetwork Trunk ke Asterisk Lain
- OpenBTS: RangeNetwork Audit
- VoIP: Trunk
GPRS
Briker OpenBTS
FreeSWITCH OpenBTS
Power Amplifier
Lain Lain
- OpenBTS: Materi Magang di ICTWATCH
- OpenBTS: Seminar Outline
- OpenBTS: Workshop Outline
- Membuat Base Station GSM Open Source
- Teknologi Selular
- GSM: Daftar Channel Frekuensi
- Wireless Internet
- OpenBSC
- AirProbe
- Base station subsystem
- GSM
- Asterisk
- Mobile phone
Catatan Legal dan Pendukung
- Siapa Bilang OpenBTS Ilegal?
- OpenBTS: Catatan MNC dan MCC Indonesia
- OpenBTS: Catatan MNC dan MCC COOL
- OpenBTS : Alokasi Frekuensi Operator GSM Indonesia
- GSM: Daftar Channel Frekuensi
Catatan Sejarah
- 2011/04/30 - Workshop OpenBTS Pertama di Indonesia dilakukan di Univ Gajah Putih Takengon Aceh Tengah
- OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan
- OpenBTS: Daftar Artikel di Media
- OpenBTS: Permohonan Kanal dan DID untuk OpenBTS
- OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman
- OpenBTS: Beroperasi di Papua
Dokumentasi Video
- http://www.metrotvnews.com/read/newsprograms/2012/10/14/14624/212/Teknologi-BTS
- http://youtu.be/8ogOcUSpINU (1/6)
- http://youtu.be/F5d7HGuhppk (2/6)
- http://youtu.be/90Jgq6bOgrQ (3/6)
- http://youtu.be/cNkx_qNqdfc (4/6)
- http://youtu.be/6LCuoeI57ak (5/6)
- http://youtu.be/-dEqcHoIlYk (6/6)
- http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share