Difference between revisions of "USRP: ClockTamer Flashing"

From OnnoWiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
Environment setup
+
==Environment setup==
  
 
Our main development platform is Ubuntu and to date it's the only tested build environment. We welcome any additions and corrections to this howto, especially build instructions for other platforms.
 
Our main development platform is Ubuntu and to date it's the only tested build environment. We welcome any additions and corrections to this howto, especially build instructions for other platforms.
Line 138: Line 138:
  
  
−
==Pranala Menarik==
 
−
 
−
* [[OpenBTS]]
 
−
* [[OpenBTS: Arsitektur secara umum]]
 
−
 
−
===Persiapan===
 
−
 
−
* [[USRP: High Precision Clock]]
 
−
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 
−
* [[USRP: Kalibrasi ClockTamer]]
 
−
* [[USRP: ClockTamer Control Protocol]]
 
−
* [[USRP: ClockTamer Flashing]]
 
−
* [[USRP: Instalasi Board]]
 
−
* [[OpenBTS: GIT Source Code]]
 
−
* [[USRP: Rangkaian Board USRP]]
 
−
* [[OpenBTS: Tethr untuk Bencana Alam]]
 
−
* [[USRP: Tip Pemesanan]]
 
 
==Pranala Menarik==
 
==Pranala Menarik==
  
Line 177: Line 160:
 
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
−
 
+
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
Line 236: Line 220:
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
Line 248: Line 233:
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 +
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Multi OpenBTS 2.8===
 
===Multi OpenBTS 2.8===
Line 253: Line 240:
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
  
 
===Ettus E110===
 
===Ettus E110===
Line 283: Line 277:
 
* [[OpenBTS: N210 Yate Config Test]]
 
* [[OpenBTS: N210 Yate Config Test]]
 
* [[OpenBTS: N210 Burn Firmware]]
 
* [[OpenBTS: N210 Burn Firmware]]
 +
 +
===RangeNetworks===
 +
 +
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[VoIP: Trunk]]
 +
  
 
===GPRS===
 
===GPRS===
Line 336: Line 342:
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
  
 
===Dokumentasi Video===
 
===Dokumentasi Video===
Line 347: Line 354:
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 
* http://youtu.be/-dEqcHoIlYk (6/6)
 
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 
* http://www.youtube.com/watch?v=Ff_rw4kAOZg&feature=share
 +
 +
===Perjuangan OpenBTS===
 +
 +
* http://www.technologyreview.com/news/522371/how-remote-places-can-get-cellular-coverage-by-doing-it-themselves/?utm_campaign=socialsync&utm_medium=social-post&utm_source=twitter
 +
  
  
 
[[Category: Wireless]]
 
[[Category: Wireless]]
 
[[Category: Selular]]
 
[[Category: Selular]]
 +
 +
==Pranala Menarik==
 +
 +
* [[OpenBTS]]
 +
* [[OpenBTS: Arsitektur secara umum]]
 +
 +
===Persiapan===
 +
 +
* [[USRP: High Precision Clock]]
 +
* [[USRP: Menyambungkan ClockTamer ke USRP1]]
 +
* [[USRP: Kalibrasi ClockTamer]]
 +
* [[USRP: ClockTamer Control Protocol]]
 +
* [[USRP: ClockTamer Flashing]]
 +
* [[USRP: Instalasi Board]]
 +
* [[OpenBTS: GIT Source Code]]
 +
* [[USRP: Rangkaian Board USRP]]
 +
* [[OpenBTS: Tethr untuk Bencana Alam]]
 +
* [[USRP: Tip Pemesanan]]
  
 
===Script===
 
===Script===
Line 356: Line 386:
 
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat GNURadio 3.4.2 di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
 
* [[OpenBTS: Script Membuat OpenBTS dan yate di Ubuntu 13.04]]
−
 
+
* [[OpenBTS: Script Membuat OpenBTS 2.8.0 di RangeNetwork Dev Kit]]
 +
* [[OpenBTS: Script Membuat OpenBTS di RangeNetwork Dev Kit]]
  
 
===OpenBTS 2.6===
 
===OpenBTS 2.6===
Line 415: Line 446:
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 12.10]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 dari SVN 2.8.0 Install Clock 52MHz di Ubuntu 13.04]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz dengan UHD tanpa GNURadio]] ''NOT RECOMMENDED''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
Line 428: Line 460:
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Database SQLite]]
 
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 
* [[OpenBTS: Set SQLite Subscriber Registry secara manual]]
 +
* [[OpenBTS: Set SQLite parameter smqueue]]
 +
* [[OpenBTS: FreeSWITCH]]
  
 
===Multi OpenBTS 2.8===
 
===Multi OpenBTS 2.8===
Line 433: Line 467:
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[OpenBTS: Pola Multi OpenBTS]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 
* [[Multi OpenBTS: Catatan Konfigurasi]] '''RECOMMENDED'''
 +
* [[Multi OpenBTS: Catatan BSIC=NCC+BCC]]
 +
* [[Multi OpenBTS: Catatan Frekuensi Planning di GSM]]
 +
* [[Multi OpenBTS: Catatan BTS Color Code BCC di GSM]]
 +
* [[Multi OpenBTS: Catatan Network Color Code NCC di GSM]]
 +
* [[Multi OpenBTS: Catatan BCCH]]
 +
* [[Multi OpenBTS: Catatan Public Land Mobile Network PLMN]]
 +
 +
===OpenBTS 3.1.x===
 +
 +
* [[OpenBTS: Install UHD untuk USRP1]]
 +
* [[OpenBTS: UHD Identifikasi Device]]
 +
* [[OpenBTS: OpenBTS 3.1.3 Compile]] '''Tidak bisa untuk USRP1'''
 +
* [[OpenBTS: Yate Compile]]
  
 
===Ettus E110===
 
===Ettus E110===
Line 466: Line 513:
 
===RangeNetworks===
 
===RangeNetworks===
  
 +
* [[OpenBTS: RangeNetwork Foto]]
 +
* [[OpenBTS: RangeNetwork menggunakan USB recovery image]]
 
* [[OpenBTS: RangeNetwork Default Setting]]
 
* [[OpenBTS: RangeNetwork Default Setting]]
 +
* [[OpenBTS: RangeNetwork Instalasi UHD]]
 +
* [[OpenBTS: RangeNetwork Compile GNURadio UHD]]
 +
* [[OpenBTS: RangeNetwork Compile]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 2.8.0]]
 +
* [[OpenBTS: RangeNetwork Compile OpenBTS 3.1.3]]
 +
* [[OpenBTS: RangeNetwork Yate Compile]] '''*RECOMMENDED*'''
 +
* [[OpenBTS: RangeNetwork Web Interface]]
 +
* [[OpenBTS: RangeNetwork Trunk ke Asterisk Lain]]
 +
* [[OpenBTS: RangeNetwork Audit]]
 +
* [[VoIP: Trunk]]
  
 
===GPRS===
 
===GPRS===
Line 520: Line 579:
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: Permohonan Kanal dan DID untuk OpenBTS]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 
* [[OpenBTS: 2013/02/19 - OpenBTS TelkomSel Mengudara di Muscat Oman]]
 +
* [[OpenBTS: Beroperasi di Papua]]
  
 
===Dokumentasi Video===
 
===Dokumentasi Video===

Latest revision as of 20:12, 10 March 2014

Environment setup

Our main development platform is Ubuntu and to date it's the only tested build environment. We welcome any additions and corrections to this howto, especially build instructions for other platforms. 

# Install tools required for building firmware.
sudo aptitude install gcc-avr avr-libc unzip

Instructions for installing software for flashing are included into respective sections about flashing, because they depend on the tools you use. Source code preparation

To check out source code and prepare it for building, run following commands in a directory of your choice: 

# Check out clock-tamer project
hg clone https://clock-tamer.googlecode.com/hg/ clock-tamer
cd clock-tamer/board

# Download LUFA 091122, unpack to clock-tamer/LUFA directory and patch it
wget http://www.fourwalledcubicle.com/files/MyUSB/LUFA%20091122.zip
unzip "LUFA 091122.zip"
ln -s "LUFA 091122" LUFA-CUR
patch -p0 <patches/lufa.diff

User code image (for USB flashing)

This image only has usercode without USB bootloader. It can be flash with usual mini-USB cable without any expensive ISP programmer needed.

Building

Depending on the ClockTamer modification you have to define one of the following defines: 

Define                            HWI
------                            ---
TAMER_1515_20                     LMX=1515 LMK=1010 OSC=20
TAMER_2080_20                     LMX=2080 LMK=1010 OSC=20
TAMER_2080_10                     LMX=2080 LMK=1010 OSC=10
TAMER_2080_VCTXCO_26_GPS          LMX=2080 LMK=1010 OSC=26 VCTXCO GPS
TAMER_1650_26_GPS                 LMX=1650 LMK=1010 OSC=26 GPS

You can lookup your hardware info by executing HWI command.

To build flash image for ClockTamer define the variable and run make in clock-tamer/board directory. For the "LMX=2080 LMK=1010 OSC=20" device it is 

CFLAGS="-DTAMER_2080_20" make

If everything went fine, you should get a lot of output, ending with this: 

Size after:
AVR Memory Usage
----------------
Device: at90usb162

Program:    6808 bytes (41.6% Full)
(.text + .data + .bootloader)

Data:        152 bytes (29.7% Full)
(.data + .bss + .noinit)

EEPROM:      411 bytes (80.3% Full)
(.eeprom)

-------- end --------

Flashing

After a successful build in the clock-tamer directory you will find generated Tamer-sdk-v1.hex and Tamer-sdk-v1.eep files, which is ready to be flashed into your ClockTamer. You can also use Tamer-sdk-v1.elf if your programmer supports this.

Actual flashing instructions depend on a type of flasher application you have. We use dfu-programmer, which is readily available in Ubuntu. If you use Ubuntu 9.10 or later, just install it from repository: 

sudo aptitude install dfu-programmer

And if you use Ubuntu 9.04 or your dfu-programmer version is <0.5 we advice you to install it from sources.

Now, when you have dfu-programmer ready, follow this steps:

  • Power off ClockTamer - disconnect power cord AND mini-USB cable.
  • Short-circuit nSS pin of GND (full connector pinout is available here).
  • Connect ClockTamer to a computer with mini-USB cable. LED should light up immediately (WITHOUT flashing once first).
  • Remove short-circuit from nSS to GND.
  • In "board" directory run
make dfu
  • If you want to flash EEPROM data too, run
   make dfu-ee

Full image (for ISP flashing)

This image contains full code, including USB bootloader, and is suitable for ISP flashing.

Note, that to be able to flash ClockTamer over USB after you flash full image, you need to generate your own SDK header. Differences in compiler versions will likely cause different placement of bootloader functions and make standard SDK header useless. Building

The building procedure is similar to those of the standard image, but you should set environment variable "SDK=0", e.g. 

SDK=0 CFLAGS="-DTAMER_2080_20" make

If everything went fine, you'll get something like this: 

Size after:
AVR Memory Usage
----------------
Device: at90usb162

Program:   10618 bytes (64.8% Full)
(.text + .data + .bootloader)

Data:        152 bytes (29.7% Full)
(.data + .bss + .noinit)

EEPROM:      437 bytes (85.4% Full)
(.eeprom)

-------- end --------

Flashing

After a successful build in the clock-tamer directory you will find generated Tamer.hex and Tamer.eep files, which is ready to be flashed into your ClockTamer. You can also use Tamer.elf if your programmer supports this.

Actual flashing instructions depend on a type of flasher and application you have. To flash full image we usually use AVR Dragon. If you have AVR Dragon too, follow this steps:

  • Download "avrdude" from svn and build it. Prebuilt avrdude 5.2 crashes when you try to use it with AVR Dragon, because of this bug. This bug is fixed in rev887 and rev895 in avrdude svn, so make sure you use one of newer revisions.
  • Connect ClockTamer to AVR Dragon, according to SPI pinout.
  • In "board" directory run
   SDK=0 make program
  • If you connected everything correctly, you should have new image uploaded to ClockTamer now.

Note, that this operation erases EEPROM and thus you loose your calibration. If may want to write down your calibrated values somewhere or disable EEPROM write by commenting out this line in makefile: 

AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep


Referensi

  • code.google.com/p/clock-tamer/wiki/LinuxBuildHowto


Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks


GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Pranala Menarik

Persiapan

Script

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

OpenBTS 3.1.x

Ettus E110

Ettus N210

RangeNetworks

GPRS

Briker OpenBTS

FreeSWITCH OpenBTS

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video

Perjuangan OpenBTS

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=USRP:_ClockTamer_Flashing&oldid=39916"