Difference between revisions of "TCP/IP: Quagga Statik Routing"
Onnowpurbo (talk | contribs) (New page: quagga cisco 2651 3750 static routing Functionalities tested: Interface settings Static routes Telnet access 3. CONFIGURATIONS You must set your Linux system...) |
Onnowpurbo (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | |||
quagga cisco 2651 3750 static routing Functionalities tested: | quagga cisco 2651 3750 static routing Functionalities tested: | ||
| Line 26: | Line 25: | ||
Check that the zebra daemon is activated: | Check that the zebra daemon is activated: | ||
| − | #vim /etc/quagga/daemons | + | #vim /etc/quagga/daemons |
| − | zebra=yes | + | |
| − | bgpd=no | + | zebra=yes |
| − | ospfd=no | + | bgpd=no |
| − | ospf6d=no | + | ospfd=no |
| − | ripd=no | + | ospf6d=no |
| − | ripngd=no | + | ripd=no |
| − | isisd=no | + | ripngd=no |
| + | isisd=no | ||
If you changed your daemons file, restart the quagga service: | If you changed your daemons file, restart the quagga service: | ||
| − | #vim /etc/init.d/quagga restart | + | #vim /etc/init.d/quagga restart |
| − | Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). | + | |
| − | Removing all routes made by zebra. | + | Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). |
| − | Nothing to flush. | + | Removing all routes made by zebra. |
| − | Loading capability module if not yet done. | + | Nothing to flush. |
| − | Starting Quagga daemons (prio:10): zebra. | + | Loading capability module if not yet done. |
| + | Starting Quagga daemons (prio:10): zebra. | ||
Set the Quagga A hostname in the /etc/quagga/vtysh.conf file: | Set the Quagga A hostname in the /etc/quagga/vtysh.conf file: | ||
| − | #vim /etc/quagga/vtysh.conf | + | #vim /etc/quagga/vtysh.conf |
| − | ! | + | |
| − | ! Sample | + | ! |
| − | ! | + | ! Sample |
| − | ! service integrated-vtysh-config | + | ! |
| − | hostname Quagga_A | + | ! service integrated-vtysh-config |
| − | username root nopassword | + | hostname Quagga_A |
| − | ! | + | username root nopassword |
| + | ! | ||
Set the Quagga B hostname in the /etc/quagga/vtysh.conf file: | Set the Quagga B hostname in the /etc/quagga/vtysh.conf file: | ||
| − | #vim /etc/quagga/vtysh.conf | + | #vim /etc/quagga/vtysh.conf |
| − | ! | + | |
| − | ! Sample | + | ! |
| − | ! | + | ! Sample |
| − | ! service integrated-vtysh-config | + | ! |
| − | hostname Quagga_B | + | ! service integrated-vtysh-config |
| − | username root nopassword | + | hostname Quagga_B |
| − | ! | + | username root nopassword |
| + | ! | ||
Don't forget to activate the ip forwarding on the Quagga A router! | Don't forget to activate the ip forwarding on the Quagga A router! | ||
Revision as of 10:36, 13 November 2013
quagga cisco 2651 3750 static routing Functionalities tested:
Interface settings Static routes Telnet access
3. CONFIGURATIONS
You must set your Linux system correctly to launch Quagga successfully. See the Quagga tutorial for assisstance. LINUX CONFIGURATIONS
Check that the zebra daemon is activated:
#vim /etc/quagga/daemons
zebra=yes bgpd=no ospfd=no ospf6d=no ripd=no ripngd=no isisd=no
If you changed your daemons file, restart the quagga service:
#vim /etc/init.d/quagga restart
Stopping Quagga daemons (prio:0): ospfd zebra (bgpd) (ripd) (ripngd) (ospf6= d) (isisd). Removing all routes made by zebra. Nothing to flush. Loading capability module if not yet done. Starting Quagga daemons (prio:10): zebra.
Set the Quagga A hostname in the /etc/quagga/vtysh.conf file:
#vim /etc/quagga/vtysh.conf
! ! Sample ! ! service integrated-vtysh-config hostname Quagga_A username root nopassword !
Set the Quagga B hostname in the /etc/quagga/vtysh.conf file:
#vim /etc/quagga/vtysh.conf
! ! Sample ! ! service integrated-vtysh-config hostname Quagga_B username root nopassword !
Don't forget to activate the ip forwarding on the Quagga A router! It is not necessary to activate ip forwarding on the Quagga B router because it has only one network interface.
ROUTERS CONFIGURATIONS
CISCO ROUTER 2651 IOS: 12.2-23a QUAGGA ROUTER A 0.99.6 interface FastEthernet0/1
ip address 10.1.3.2 255.255.255.0 no shutdown interface eth0 ip address 10.1.3.1/24 link-detect
interface FastEthernet0/0
ip address 10.1.4.2 255.255.255.0 no shutdown interface eth1 ip address 10.1.1.1/24 link-detect
hostname Cisco-2651 ip route 10.1.0.0 255.255.0.0 10.1.3.1 ip route 10.200.1.4 255.255.255.255 10.1.4.1 ip route 10.200.1.1 255.255.255.255 10.1.3.1 ip route 10.1.0.0/16 10.1.3.2 ip route 10.200.1.4/32 10.1.3.2 ip route 10.200.1.1/32 10.1.1.2 line vty 0 4
no login
line vty
no login
enable secret password enable password password
CISCO SWITCH L3 3750 IOS: 12.2-25.SEE2 QUAGGA ROUTER B 0.99.6 interface vlan 1
ip address 10.1.1.2 255.255.255.0 no shutdown interface eth0 ip address 10.1.4.1/24 link-detect
interface Loopback 1
ip address 10.200.1.1 255.255.255.255 interface lo ip address 10.200.1.4/32 link-detect
hostname 3750_L3 hostname quagga-router-b ip route 0.0.0.0 0.0.0.0 10.1.1.1 ip route 0.0.0.0/0 10.1.4.2 line vty 0 4
no login
line vty 0 4
no login
enable secret password
enable password password
ip routing ip multicast-routing distributed