Difference between revisions of "SDR: rtl-sdr Ubuntu 12.04"

From OnnoWiki
Jump to navigation Jump to search
Line 96: Line 96:
  
 
* http://www.instructables.com/id/rtl-sdr-on-Ubuntu/
 
* http://www.instructables.com/id/rtl-sdr-on-Ubuntu/
 +
 +
 +
==Pranala Menarik==
 +
 +
* [[Software Defined Radio]]
 +
* [[SDR: SDRSharp Ubuntu 12.04]]
 +
* [[SDR: gqrx Ubuntu 12.04]]
 +
* [[SDR: rtl-sdr Ubuntu 12.04]]
 +
* [[SDR: QtRadio Ubuntu 12.04]]

Revision as of 13:29, 15 October 2012

It was recently discovered that several cheap DVB-T usb dongles could be configured to be used as cheap ham radio receivers. Follow along with the discussions here: http://www.reddit.com/r/rtlsdr or find some of the useful software here: http://sdr.osmocom.org/trac/wiki/rtl-sdr

I picked up one of the compatible receivers from ali-express: http://www.aliexpress.com/snapshot/106450763.html

and will document here the steps I took to set it up with gnuradio on ubuntu 12.04.

There are a few things that I won't cover in this instructable, because they deserve an instructable of their own. These include:

1) using the Ubuntu command line (terminal) 2) cloning a git repository 3) building software from source on Ubuntu (especially with cmake)

If anyone has links to stellar, class A++ quality tutorials on any of these things, please add them to the comment and I will link them here.


Step 1Install gnu-radio guts.JPG It looks like there are two options for installing an up-to-date gnuradio on ubuntu:

1) use an install script 2) install from source

Don't ask me why, but I tried the second option (probably the harder). After a first attempt that failed, I went for the first (and recommended option) to much success! So... lesson learned. Note to self, follow advice of program developers when installing software.

My advice, use the install script.



Step 2Install rtl-sdr tools Next, you want to install any missing rtl-sdr specific tools from here:

http://sdr.osmocom.org/trac/wiki/rtl-sdr

Again, rather than duplicating instructions, follow the steps outlined here to install the rtlsdr library & capture tool: git://git.osmocom.org/rtl-sdr.git

Although this page also mentions a gnu radio module (git://git.osmocom.org/gr-osmosdr) I was unable to get it to work. Instead, I installed:

https://github.com/balint256/gr-baz

as recommended from here: http://2h2o.tumblr.com/

the basic steps are:

git clone https://github.com/balint256/gr-baz
cd gr-baz
sh bootstrap
./configure
make
sudo make install
sudo ldconfig

Now you should have all the necessary software to communicate with the DVB-T dongle using gnuradio.



Step 3Setup udev rules Next, you need to add some udev rules to make the dongle available for the non-root users. First you want to find the vendor id and product id for your dongle.

The way I did this was to run:

lsusb

The last line was the Realtek dongle:

Bus 001 Device 008: ID 0bda:2838 Realtek Semiconductor Corp.

The important parts are "0bda" (the vendor id) and "2838" (the product id).

Create a new file as root named /etc/udev/rules.d/20.rtlsdr.rules that contains the following line:

SUBSYSTEM=="usb", ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="2838", GROUP="adm", MODE="0666", SYMLINK+="rtl_sdr"

With the vendor and product ids for your particular dongle. This should make the dongle accessible to any user in the adm group. and add a /dev/rtl_sdr symlink when the dongle is attached.

It's probably a good idea to unplug the dongle, restart udev (sudo restart udev) and re-plug in the dongle at this point.







Referensi


Pranala Menarik