Difference between revisions of "OpenBTS: E110 Kalibrasi Clock"

From OnnoWiki
Jump to navigation Jump to search
Line 161: Line 161:
 
* [[OpenBTS: 2.8 dari SVN Install]]
 
* [[OpenBTS: 2.8 dari SVN Install]]
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
 +
* [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
 
* [[OpenBTS: Yate Softswitch]]
 
* [[OpenBTS: Yate Softswitch]]
 +
* [[OpenBTS: Yate Config Test]]
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
 
* [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
Line 175: Line 177:
  
 
* [[OpenBTS: E110 Cara Login]]
 
* [[OpenBTS: E110 Cara Login]]
* [[OpenBTS: E110 Install Image di MicroSD]]
+
* [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Cek Daughter Board]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Mengubah Master Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Kalibrasi Clock]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
 
* [[OpenBTS: E110 Bekerja dengan opkg]]
* [[OpenBTS: E110 GNURadio]]
+
* [[OpenBTS: E110 GNURadio]] '''*RECOMMENDED*'''
* [[OpenBTS: E110 Install UHD Image]]
+
* [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS]]
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 
* [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
 +
* [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
  
 
===Power Amplifier===
 
===Power Amplifier===

Revision as of 14:39, 11 August 2012

Download ttsou Kal

Download dari mesin lain & scp ke E110

https://github.com/ttsou/kalibrate-uhd/zipball/master
cd ~/Downloads
scp ttsou-kalibrate-uhd-8200e28.zip root@192.168.0.148:

Atau via git (kadang gagal sih ini)

cd ~/src
git clone git://github.com/ttsou/kalibrate-uhd.git kalibrate-uhd

Compile FFTW3

Download dari

http://www.fftw.org/download.html

Lakukan

mv fftw-3.3.2.tar.gz ~/src
cd ~/src
tar zxvf fftw-3.3.2.tar.gz
cd ~/src/fftw-3.3.2
./configure
make clean
make
make all
make check
make instal

Compile

Jika di download via web

opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native
opkg install fftwf fftwf-dev task-sdk-gnuradio-native
cd ~
mv ttsou-kalibrate-uhd-8200e28.zip src/
cd src
unzip ttsou-kalibrate-uhd-8200e28.zip 
cd ~/src/ttsou-kalibrate-uhd-8200e28
./bootstrap && CXXFLAGS='-W -Wall -O3' ./configure && make


Jika di download via git

opkg remove --force-depends fftwf fftwf-dev task-sdk-gnuradio-native
opkg install fftwf fftwf-dev task-sdk-gnuradio-native
cd ~/src/kalibrate-uhd
./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make


Error fftw3

Saat ./configure keluar error

checking for FFTW3... configure: error: Package requirements (fftw3 >= 3.0) were not met:

No package 'fftw3' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables FFTW3_CFLAGS
and FFTW3_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


SOLUSI: Mungkin dengan -fPIC dalam CFLAGS jadi

cd ~/src/kalibrate-uhd
./bootstrap && CXXFLAGS='-W -Wall -O3 -fPIC' ./configure && make

Melakukan Kalibrasi

Gunakan Kalibrate atau Kalibrate-UHD untuk mengukur offset frekuensi,

[root@openBTS kal-0.2]# ./kal -f 946600000 -u
USRP side: B
FPGA clock: 52000000
Decimation: 192
Antenna: RX2
Sample rate: 270833.343750
average [min, max] (range, stddev)
501.351685 [461, 546] (85, 19.314581)
overruns: 0
not found: 0

Referensi

Pranala Menarik

Persiapan

OpenBTS 2.6

OpenBTS 2.8

Multi OpenBTS 2.8

Ettus E110

Power Amplifier

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah

Dokumentasi Video