Difference between revisions of "OpenBTS: E110 Instalasi OpenBTS"

From OnnoWiki
Jump to navigation Jump to search
Line 6: Line 6:
 
Lakukan
 
Lakukan
  
 +
mv libosip2-3.6.0.tar.gz ~/src
 +
cd ~/src
 
  tar zxvf libosip2-3.6.0.tar.gz
 
  tar zxvf libosip2-3.6.0.tar.gz
 
  mkdir linux-build
 
  mkdir linux-build
  cd ~/linux-build/
+
  cd ~/src/linux-build/
  ~/libosip2-3.6.0/configure  
+
  ~/src/libosip2-3.6.0/configure  
 
  make clean
 
  make clean
 
  make all
 
  make all
 
  make
 
  make
 
  make install
 
  make install
 
 
  
 
==Instalasi OpenBTS==
 
==Instalasi OpenBTS==

Revision as of 16:34, 10 February 2012

Instalasi osip2

Download osip dari http://ftp.gnu.org/gnu/osip/ tepatnya http://ftp.gnu.org/gnu/osip/libosip2-3.6.0.tar.gz

Lakukan

mv libosip2-3.6.0.tar.gz ~/src
cd ~/src
tar zxvf libosip2-3.6.0.tar.gz
mkdir linux-build
cd ~/src/linux-build/
~/src/libosip2-3.6.0/configure 
make clean
make all
make
make install

Instalasi OpenBTS

Cek apakah ada openbts

updatedb &
locate openbts

Kalau tidak ketemu berarti kita perlu instalasi.

Download di PC source code openbts bisa melalui

svn co http://wush.net/svn/range/software/public openbts
scp -r openbts root@<ip-address-E110>

Compile menggunakan perintah

cd ~/openbts/openbts/trunk
./autogen.sh 
./configure --with-uhd CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" 
make

Sebaiknya jangan menggunakan autoreconf seperti di bawah ini karena akan meminta perl yang tidak ada di E110.

cd ~/openbts/openbts/trunk
autoreconf -i
./configure --with-uhd CFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" CXXFLAGS="-march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -O3" 
make

Pranala Menarik

Persiapan Hardware

OpenBTS 2.6

OpenBTS 2.8

Ettus E110

Lain Lain

Catatan Legal dan Pendukung

Catatan Sejarah