Difference between revisions of "UEC: Peritah-perintah Euca"

From OnnoWiki
Jump to navigation Jump to search
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
Commands from euca2ools
+
==Image Management==
  
Image Management
+
===euca-bundle-image===
 
 
euca-bundle-image
 
  
 
Bundles an image for use with Eucalyptus or Amazon EC2.
 
Bundles an image for use with Eucalyptus or Amazon EC2.
  
euca-bundle-image -i, --image image_path -u, --user user [-c, --cert cert_path]
+
euca-bundle-image -i, --image image_path -u, --user user [-c, --cert cert_path]
[-k, --privatekey private_key_path] [-p, --prefix prefix] [--kernel kernel_id]
+
[-k, --privatekey private_key_path] [-p, --prefix prefix] [--kernel kernel_id]
[--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
+
[--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
[-d, --destination destination_path] [--ec2cert ec2cert_path]
+
[-d, --destination destination_path] [--ec2cert ec2cert_path]
[-r, --arch target_architecture] [--batch] [-h, --help] [--version] [--debug]
+
[-r, --arch target_architecture] [--batch] [-h, --help] [--version] [--debug]
 
   
 
   
REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
 
   
 
   
-i, --image Path to the image file to bundle.
+
-i, --image Path to the image file to bundle.
 
   
 
   
-u, --user User ID (12-digit) of the user who is bundling the image.
+
-u, --user User ID (12-digit) of the user who is bundling the image.
 
   
 
   
OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
 
   
 
   
-c, --cert Path to the user's PEM encoded certificate.
+
-c, --cert Path to the user's PEM encoded certificate.
 
   
 
   
-k, --privatekey Path to the user's PEM encoded private key.
+
-k, --privatekey Path to the user's PEM encoded private key.
 
   
 
   
-p, --prefix The prefix for the bundle image files. (default: image name).
+
-p, --prefix The prefix for the bundle image files. (default: image name).
 
   
 
   
--kernel The kernel to be associated with the bundled image.
+
--kernel The kernel to be associated with the bundled image.
 
   
 
   
--ramdisk The ramdisk to be associated with the bundled image.
+
--ramdisk The ramdisk to be associated with the bundled image.
 
   
 
   
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
+
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
 
   
 
   
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
+
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
 
   
 
   
--ec2cert The path to the Cloud's X509 public key certificate.
+
--ec2cert The path to the Cloud's X509 public key certificate.
 
   
 
   
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
+
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
 
   
 
   
--batch Run in batch mode (compatibility only. has no effect).
+
--batch Run in batch mode (compatibility only. has no effect).
 
   
 
   
-a, --access-key User's Access Key ID.
+
-a, --access-key User's Access Key ID.
 
   
 
   
-s, --secret-key User's Secret Key.
+
-s, --secret-key User's Secret Key.
 
   
 
   
-U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
 
   
 
   
--config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
 
   
 
   
-h, --help Display this help message.
+
-h, --help Display this help message.
 
   
 
   
--version Display the version of this tool.
+
--version Display the version of this tool.
 
   
 
   
--debug Turn on debugging.
+
--debug Turn on debugging.
  
  
euca-bundle-vol
+
===euca-bundle-vol===
  
 
Bundle the local filesystem of a running instance as a bundled image.
 
Bundle the local filesystem of a running instance as a bundled image.
  
01 euca-bundle-vol -u, --user user -s, --size size_in_MB
+
euca-bundle-vol -u, --user user -s, --size size_in_MB
02  
+
03 [-c, --cert cert_path] [-k, --privatekey private_key_path]
+
  [-c, --cert cert_path] [-k, --privatekey private_key_path]
04  
+
05 [-a, --all] [-e, --exclude dir1, dir2,...dirN] [-p, --prefix prefix] [--[no-]inherit] [-v, --volume volume_path] [--fstab fstab_path] [--generate-fstab] [--kernel kernel_id] [--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
+
  [-a, --all] [-e, --exclude dir1, dir2,...dirN] [-p, --prefix prefix] [--[no-]inherit] [-v, --volume volume_path] [--fstab fstab_path] [--generate-fstab] [--kernel kernel_id] [--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
06  
+
07 [-d, --destination destination_path] [--ec2cert ec2cert_path] [-r, --arch target_architecture] [--batch] [--version]
+
  [-d, --destination destination_path] [--ec2cert ec2cert_path] [-r, --arch target_architecture] [--batch] [--version]
08  
+
09 REQUIRED PARAMETERS
+
  REQUIRED PARAMETERS
10  
+
11 -u, --user User ID (12-digit) of the user who is bundling the image.
+
  -u, --user User ID (12-digit) of the user who is bundling the image.
12  
+
13 -s, --size Size for the image in MB (default: 10GB or 10240MB).
+
  -s, --size Size for the image in MB (default: 10GB or 10240MB).
14  
+
15 OPTIONAL PARAMETERS
+
  OPTIONAL PARAMETERS
16  
+
17 -c, --cert Path to the user's PEM encoded certificate.
+
  -c, --cert Path to the user's PEM encoded certificate.
18  
+
19 -k, --privatekey Path to the user's PEM encoded private key.
+
  -k, --privatekey Path to the user's PEM encoded private key.
20  
+
21 -a, --all Bundle all directories (including mounted filesystems).
+
  -a, --all Bundle all directories (including mounted filesystems).
22  
+
23 -p, --prefix The prefix for the bundle image files. (default: image name).
+
  -p, --prefix The prefix for the bundle image files. (default: image name).
24  
+
25 --[no-]inherit Add (or do not add) instance metadata to the bundled image. Inherit is set by default.
+
  --[no-]inherit Add (or do not add) instance metadata to the bundled image. Inherit is set by default.
26  
+
27 -e, --exclude comma-separated list of directories to exclude.
+
  -e, --exclude comma-separated list of directories to exclude.
28  
+
29 --kernel The kernel to be associated with the bundled image.
+
  --kernel The kernel to be associated with the bundled image.
30  
+
31 --ramdisk The ramdisk to be associated with the bundled image.
+
  --ramdisk The ramdisk to be associated with the bundled image.
32  
+
33 -B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
+
  -B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
34  
+
35 -d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
+
  -d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
36  
+
37 --ec2cert The path to the Cloud's X509 public key certificate.
+
  --ec2cert The path to the Cloud's X509 public key certificate.
38  
+
39 -r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
+
  -r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
40  
+
41 -v, --volume Path to mounted volume to create the bundle from (default: "/").
+
  -v, --volume Path to mounted volume to create the bundle from (default: "/").
42  
+
43 --fstab Path to the fstab to be bundled into the image.
+
  --fstab Path to the fstab to be bundled into the image.
44  
+
45 --generate-fstab Generate fstab to bundle into the image.
+
  --generate-fstab Generate fstab to bundle into the image.
46  
+
47 --batch Run in batch mode (compatibility only. has no effect).
+
  --batch Run in batch mode (compatibility only. has no effect).
 +
 
  
euca-delete-bundle
+
===euca-delete-bundle===
  
 
Delete a previously uploaded bundle.
 
Delete a previously uploaded bundle.
view source
+
 
print?
+
euca-delete-bundle -b, --bucket bucket [-m, --manifest manifest_path]
01 euca-delete-bundle -b, --bucket bucket [-m, --manifest manifest_path]
+
[-p, --prefix prefix] [--clear] [-h, --help] [--version] [--debug]
02 [-p, --prefix prefix] [--clear] [-h, --help] [--version] [--debug]
+
03  
+
  REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05  
+
  bucket The name of the bucket to delete from.
06 bucket The name of the bucket to delete from.
+
07  
+
  OPTIONAL PARAMETERS
08 OPTIONAL PARAMETERS
+
09  
+
  -m, --manifest The path to the manifest file.
10 -m, --manifest The path to the manifest file.
+
11  
+
  -b, --bucket The bucket to delete the bundle from (if no
12 -b, --bucket The bucket to delete the bundle from (if no
+
manifest is specified, all images from this
13 manifest is specified, all images from this
+
bucket will be deleted).
14 bucket will be deleted).
+
15  
+
  -p, --prefix The filename prefix for bundled files. Defaults
16 -p, --prefix The filename prefix for bundled files. Defaults
+
to image name.
17 to image name.
+
18  
+
  --clear Delete the bucket containing the image.
19 --clear Delete the bucket containing the image.
+
20  
+
  -a, --access-key User's Access Key ID.
21 -a, --access-key User's Access Key ID.
+
22  
+
  -s, --secret-key User's Secret Key.
23 -s, --secret-key User's Secret Key.
+
24  
+
  -U, --url URL of the Cloud to connect to.
25 -U, --url URL of the Cloud to connect to.
+
26  
+
  --config Read credentials and cloud settings from the
27 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
28 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
29  
+
  -h, --help Display this help message.
30 -h, --help Display this help message.
+
31  
+
  --version Display the version of this tool.
32 --version Display the version of this tool.
+
33  
+
  --debug Turn on debugging.
34 --debug Turn on debugging.
+
 
euca-download-bundle
+
 
 +
===euca-download-bundle===
  
 
Downloads a bundled image from a bucket.
 
Downloads a bundled image from a bucket.
view source
+
 
print?
+
euca-download-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-d, --directory directory]
01 euca-download-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-d, --directory directory]
+
[-h, --help] [--version] [--debug]
02 [-h, --help] [--version] [--debug]
+
03  
+
  REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05  
+
  -b, --bucket The name of the bucket to download from.
06 -b, --bucket The name of the bucket to download from.
+
07  
+
  OPTIONAL PARAMETERS
08 OPTIONAL PARAMETERS
+
09  
+
  -m, --manifest The path to the manifest file.
10 -m, --manifest The path to the manifest file.
+
11  
+
  -d, --directory The name of the directory to download the bundled parts to.
12 -d, --directory The name of the directory to download the bundled parts to.
+
13  
+
  -a, --access-key User's Access Key ID.
14 -a, --access-key User's Access Key ID.
+
15  
+
  -s, --secret-key User's Secret Key.
16 -s, --secret-key User's Secret Key.
+
17  
+
  -U, --url URL of the Cloud to connect to.
18 -U, --url URL of the Cloud to connect to.
+
19  
+
  --config Read credentials and cloud settings from the
20 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
21 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
22  
+
  -h, --help Display this help message.
23 -h, --help Display this help message.
+
24  
+
  --version Display the version of this tool.
25 --version Display the version of this tool.
+
26  
+
  --debug Turn on debugging.
27 --debug Turn on debugging.
+
 
euca-unbundle
+
===euca-unbundle===
  
 
Unbundles a previously bundled image.
 
Unbundles a previously bundled image.
view source
+
 
print?
+
euca-unbundle-image -m, --manifest manifest_path [-k, --privatekey private_key_path]
01 euca-unbundle-image -m, --manifest manifest_path [-k, --privatekey private_key_path]
+
[-s, --source source_directory] [-d, --destination destination_directory]
02 [-s, --source source_directory] [-d, --destination destination_directory]
+
[-h, --help] [--version] [--debug]
03 [-h, --help] [--version] [--debug]
+
04  
+
  REQUIRED PARAMETERS
05 REQUIRED PARAMETERS
+
06  
+
  -m, --manifest Path to the manifest file for the bundled image.
07 -m, --manifest Path to the manifest file for the bundled image.
+
08  
+
  OPTIONAL PARAMETERS
09 OPTIONAL PARAMETERS
+
10  
+
  -d, --destination Directory to store the image to (defaults to the current directory).
11 -d, --destination Directory to store the image to (defaults to the current directory).
+
12  
+
  -s, --source Source directory for the bundled image parts (defaults to manifest directory).
13 -s, --source Source directory for the bundled image parts (defaults to manifest directory).
+
14  
+
  -a, --access-key User's Access Key ID.
15 -a, --access-key User's Access Key ID.
+
16  
+
  -s, --secret-key User's Secret Key.
17 -s, --secret-key User's Secret Key.
+
18  
+
  -U, --url URL of the Cloud to connect to.
19 -U, --url URL of the Cloud to connect to.
+
20  
+
  --config Read credentials and cloud settings from the
21 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
22 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
23  
+
  -h, --help Display this help message.
24 -h, --help Display this help message.
+
25  
+
  --version Display the version of this tool.
26 --version Display the version of this tool.
+
27  
+
  --debug Turn on debugging.
28 --debug Turn on debugging.
+
 
euca-upload-bundle
+
 
 +
===euca-upload-bundle===
  
 
Upload a previously bundled image to the cloud.
 
Upload a previously bundled image to the cloud.
view source
+
 
print?
+
euca-upload-bundle -b, --bucket bucket -m, --manifest manifest_path [-a, --access-key access_key_id]
01 euca-upload-bundle -b, --bucket bucket -m, --manifest manifest_path [-a, --access-key access_key_id]
+
[-s, --secret-key secret_key] [--acl canned_acl] [--ec2cert ec2cert_path] [-d, --directory bundle_path]
02 [-s, --secret-key secret_key] [--acl canned_acl] [--ec2cert ec2cert_path] [-d, --directory bundle_path]
+
[--part part] [--url url] [--skipmanifest] [--debug] [-h, --help] [--version]
03 [--part part] [--url url] [--skipmanifest] [--debug] [-h, --help] [--version]
+
04  
+
  REQUIRED PARAMETERS
05 REQUIRED PARAMETERS
+
06  
+
  -b, --bucket The name of the bucket to upload to. Bucket will be created if it does not exist.
07 -b, --bucket The name of the bucket to upload to. Bucket will be created if it does not exist.
+
08  
+
  -m, --manifest The path to the manifest file for the bundled image.
09 -m, --manifest The path to the manifest file for the bundled image.
+
10  
+
  OPTIONAL PARAMETERS
11 OPTIONAL PARAMETERS
+
12  
+
  --acl Canned access control policy (defaults to "aws-exec-read").
13 --acl Canned access control policy (defaults to "aws-exec-read").
+
14  
+
  --ec2cert The path to the Cloud's X509 public key certificate.
15 --ec2cert The path to the Cloud's X509 public key certificate.
+
16  
+
  -d, --directory The directory containing the bundled image to upload (defaults to the manifest directory).
17 -d, --directory The directory containing the bundled image to upload (defaults to the manifest directory).
+
18  
+
  --part Uploads specified part and all subsequent parts.
19 --part Uploads specified part and all subsequent parts.
+
20  
+
  --skipmanifest Do not upload the manifest file.
21 --skipmanifest Do not upload the manifest file.
+
22  
+
  -a, --access-key User's Access Key ID.
23 -a, --access-key User's Access Key ID.
+
24  
+
  -s, --secret-key User's Secret Key.
25 -s, --secret-key User's Secret Key.
+
26  
+
  -U, --url URL of the Cloud to connect to.
27 -U, --url URL of the Cloud to connect to.
+
28  
+
  --config Read credentials and cloud settings from the
29 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
30 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
31  
+
  -h, --help Display this help message.
32 -h, --help Display this help message.
+
33  
+
  --version Display the version of this tool.
34 --version Display the version of this tool.
+
35  
+
  --debug Turn on debugging.
36 --debug Turn on debugging.
+
 
euca-describe-images
+
===euca-describe-images===
  
 
Shows information about machine images.
 
Shows information about machine images.
view source
+
 
print?
+
euca-describe-images [-a] [-o owner] [-x user] [-h, --help] [--version] [--debug] [image1 image2 ... imageN]
01 euca-describe-images [-a] [-o owner] [-x user] [-h, --help] [--version] [--debug] [image1 image2 ... imageN]
+
02  
+
  OPTIONAL PARAMETERS
03 OPTIONAL PARAMETERS
+
04  
+
  image1 image2 ... imageN Images to describe.
05 image1 image2 ... imageN Images to describe.
+
06  
+
  -a Show all images that the user has access to.
07 -a Show all images that the user has access to.
+
08  
+
  -o Show only images owned by the owner specified are displayed.
09 -o Show only images owned by the owner specified are displayed.
+
10  
+
  -x Show only images that the specified user is permitted to launch.
11 -x Show only images that the specified user is permitted to launch.
+
12  
+
  -A, --access-key User's Access Key ID.
13 -A, --access-key User's Access Key ID.
+
14  
+
  -S, --secret-key User's Secret Key.
15 -S, --secret-key User's Secret Key.
+
16  
+
  -U, --url URL of the Cloud to connect to.
17 -U, --url URL of the Cloud to connect to.
+
18  
+
  --config Read credentials and cloud settings from the
19 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
20 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
21  
+
  -h, --help Display this help message.
22 -h, --help Display this help message.
+
23  
+
  --version Display the version of this tool.
24 --version Display the version of this tool.
+
25  
+
  --debug Turn on debugging.
26 --debug Turn on debugging.
+
 
euca-describe-image-attribute
+
 
 +
===euca-describe-image-attribute===
  
 
Show image attributes.
 
Show image attributes.
view source
+
 
print?
+
euca-describe-image-attribute [-l, --launch-permission] [-p, --product-code]
01 euca-describe-image-attribute [-l, --launch-permission] [-p, --product-code]
+
[-B, --block-device-mapping] [--kernel] [--ramdisk]
02 [-B, --block-device-mapping] [--kernel] [--ramdisk]
+
[-h, --help] [--version] [--debug] image_id
03 [-h, --help] [--version] [--debug] image_id
+
04  
+
  REQUIRED PARAMETERS
05 REQUIRED PARAMETERS
+
06  
+
  image_id unique identifier for the image that you want to retrieve the attributes for.
07 image_id unique identifier for the image that you want to retrieve the attributes for.
+
08  
+
  OPTIONAL PARAMETERS
09 OPTIONAL PARAMETERS
+
10  
+
  -B, --block-device-mapping show block device mapping.
11 -B, --block-device-mapping show block device mapping.
+
-l, --launch-permission show launch permissions.
12 -l, --launch-permission show launch permissions.
+
-p, --product-code show the product codes associated with the image
13 -p, --product-code show the product codes associated with the image
+
--kernel show the kernel id associated with the image.
14 --kernel show the kernel id associated with the image.
+
--ramdisk show the ramdisk id associated with the image.
15 --ramdisk show the ramdisk id associated with the image.
+
16  
+
  -a, --access-key user's Access Key ID.
17 -a, --access-key user's Access Key ID.
+
18  
+
  -s, --secret-key user's Secret Key.
19 -s, --secret-key user's Secret Key.
+
20  
+
  -U, --url URL of the Cloud to connect to.
21 -U, --url URL of the Cloud to connect to.
+
 
22  
+
  -h, --help Display this help message.
23 -h, --help Display this help message.
+
24  
+
  --version Display the version of this tool.
25 --version Display the version of this tool.
+
26  
+
  --debug Turn on debugging.
27 --debug Turn on debugging.
+
 
euca-register
+
===euca-register===
  
 
Registers a manifest for use with the cloud.
 
Registers a manifest for use with the cloud.
view source
+
 
print?
+
euca-register [-h, --help] [--version] [--debug] image_location
01 euca-register [-h, --help] [--version] [--debug] image_location
+
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  image_location - path to the uploaded image (bucket/manifest).
05 image_location - path to the uploaded image (bucket/manifest).
+
06  
+
  OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08  
+
  -a, --access-key user's Access Key ID.
09 -a, --access-key user's Access Key ID.
+
10  
+
  -s, --secret-key user's Secret Key.
11 -s, --secret-key user's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  -h, --help Display this help message.
15 -h, --help Display this help message.
+
16  
+
  --version Display the version of this tool.
17 --version Display the version of this tool.
+
18  
+
  --debug Turn on debugging.
19 --debug Turn on debugging.
+
 
euca-deregister
+
 
 +
===euca-deregister===
  
 
Deregisters an image from the cloud.
 
Deregisters an image from the cloud.
view source
+
 
print?
+
euca-deregister [-h, --help] [--version] [--debug] image_id
01 euca-deregister [-h, --help] [--version] [--debug] image_id
+
02  
+
  REQUIRED PARAMETER
03 REQUIRED PARAMETER
+
04  
+
  image_id unique identifier for the image to be deregistered.
05 image_id unique identifier for the image to be deregistered.
+
06  
+
  OPTIONAL PARAMETER
07 OPTIONAL PARAMETER
+
08  
+
  -a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10  
+
  -s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  --config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17  
+
  -h, --help Display this help message.
18 -h, --help Display this help message.
+
19  
+
  --version Display the version of this tool.
20 --version Display the version of this tool.
+
21  
+
  --debug Turn on debugging.
22 --debug Turn on debugging.
+
 
Instance Management
+
 
euca-describe-instances
+
==Instance Management==
 +
 
 +
===euca-describe-instances===
  
 
Shows information about instances.
 
Shows information about instances.
view source
+
 
print?
+
euca-describe-instances [-h, --help] [--version] [--debug]
01 euca-describe-instances [-h, --help] [--version] [--debug]
+
[instance1... instanceN]
02 [instance1... instanceN]
+
03  
+
  OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05  
+
  instance1... instanceN instances to describe.
06 instance1... instanceN instances to describe.
+
07  
+
  -a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09  
+
  -s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11  
+
  -U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13  
+
  --config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16  
+
  -h, --help Display this help message.
17 -h, --help Display this help message.
+
18  
+
  --version Display the version of this tool.
19 --version Display the version of this tool.
+
20  
+
  --debug Turn on debugging.
21 --debug Turn on debugging.
+
 
euca-reboot-instances
+
 
 +
===euca-reboot-instances===
  
 
Reboots specified instances.
 
Reboots specified instances.
view source
+
 
print?
+
euca-reboot-instances [-h, --help] [--version] [--debug]
01 euca-reboot-instances [-h, --help] [--version] [--debug]
+
[instance1... instanceN]
02 [instance1... instanceN]
+
03  
+
  OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05  
+
  instance1... instanceN instances to reboot.
06 instance1... instanceN instances to reboot.
+
07  
+
  -a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09  
+
  -s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11  
+
  -U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13  
+
  --config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16  
+
  -h, --help Display this help message.
17 -h, --help Display this help message.
+
18  
+
  --version Display the version of this tool.
19 --version Display the version of this tool.
+
20  
+
  --debug Turn on debugging.
21 --debug Turn on debugging.
+
 
euca-run-instances
+
 
 +
===euca-run-instances===
  
 
Starts instances.
 
Starts instances.
view source
+
 
print?
+
euca-run-instances [-n, --instance-count count] [-g, --group group_name] [-k, --key keyname]
01 euca-run-instances [-n, --instance-count count] [-g, --group group_name] [-k, --key keyname]
+
[--addressing addressing] [-t, --instance-type instance_type] [-z, --availability-zone zone]
02 [--addressing addressing] [-t, --instance-type instance_type] [-z, --availability-zone zone]
+
[--kernel kernel_id] [--ramdisk ramdisk_id] [-h, --help] [--version] [--debug] image_id
03 [--kernel kernel_id] [--ramdisk ramdisk_id] [-h, --help] [--version] [--debug] image_id
+
04  
+
  REQUIRED PARAMETERS
05 REQUIRED PARAMETERS
+
06  
+
  image_id identifier for the image to run.
07 image_id identifier for the image to run.
+
08  
+
  OPTIONAL PARAMETERS
09 OPTIONAL PARAMETERS
+
10  
+
  -n, --instance-count Number of instances to run.
11 -n, --instance-count Number of instances to run.
+
12  
+
  -g, --group Security group to run the instance under.
13 -g, --group Security group to run the instance under.
+
14  
+
  -k, --key Name of a (previously created) keypair to associate with this reservation.
15 -k, --key Name of a (previously created) keypair to associate with this reservation.
+
16  
+
  -d, --user-data User data for instances read from the command line.
17 -d, --user-data User data for instances read from the command line.
+
18  
+
  -f, --user-data-file User data for instances as a filename.
19 -f, --user-data-file User data for instances as a filename.
+
20  
+
  --addressing Addressing mode (e.g., private).
21 --addressing Addressing mode (e.g., private).
+
22  
+
  -t, --instance-type VM Image type to run the instance(s) as (default: m1.small).
23 -t, --instance-type VM Image type to run the instance(s) as (default: m1.small).
+
24  
+
  -z, --availability-zone Availability zone to run the instance(s) in.
25 -z, --availability-zone Availability zone to run the instance(s) in.
+
26  
+
  --kernel Id of the kernel to be used to launch instance(s).
27 --kernel Id of the kernel to be used to launch instance(s).
+
28  
+
  --ramdisk Id of the ramdisk to be used to launch instance(s).
29 --ramdisk Id of the ramdisk to be used to launch instance(s).
+
30  
+
  -a, --access-key User's Access Key ID.
31 -a, --access-key User's Access Key ID.
+
32  
+
  -s, --secret-key User's Secret Key.
33 -s, --secret-key User's Secret Key.
+
34  
+
  -U, --url URL of the Cloud to connect to.
35 -U, --url URL of the Cloud to connect to.
+
36  
+
  --config Read credentials and cloud settings from the
37 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
38 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
39  
+
  -h, --help Display this help message.
40 -h, --help Display this help message.
+
41  
+
  --version Display the version of this tool.
42 --version Display the version of this tool.
+
43  
+
  --debug Turn on debugging.
44 --debug Turn on debugging.
+
 
euca-terminate-instances
+
 
 +
===euca-terminate-instances===
  
 
Stops specified instances.
 
Stops specified instances.
view source
+
 
print?
+
euca-terminate-instances [-h, --help] [--version] [--debug]
01 euca-terminate-instances [-h, --help] [--version] [--debug]
+
[instance1... instanceN]
02 [instance1... instanceN]
+
03  
+
  REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05  
+
  instance1... instanceN instances to terminate.
06 instance1... instanceN instances to terminate.
+
07  
+
  OPTIONAL PARAMETERS
08 OPTIONAL PARAMETERS
+
09  
+
  -a, --access-key User's Access Key ID.
10 -a, --access-key User's Access Key ID.
+
11  
+
  -s, --secret-key User's Secret Key.
12 -s, --secret-key User's Secret Key.
+
13  
+
  -U, --url URL of the Cloud to connect to.
14 -U, --url URL of the Cloud to connect to.
+
15  
+
  --config Read credentials and cloud settings from the
16 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
17 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
18  
+
  -h, --help Display this help message.
19 -h, --help Display this help message.
+
   
20  
+
--version Display the version of this tool.
21 --version Display the version of this tool.
+
22  
+
  --debug Turn on debugging.
23 --debug Turn on debugging.
+
 
euca-confirm-product-instance
+
 
 +
===euca-confirm-product-instance===
  
 
Confirm if instance is running with product code attached.
 
Confirm if instance is running with product code attached.
view source
+
 
print?
+
euca-confirm-product-instance i, --instance instance_id [-h, --help] [-version] [--debug] product_code
01 euca-confirm-product-instance i, --instance instance_id [-h, --help] [-version] [--debug] product_code
+
 
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  -i, --instance Unique identifier for a running instance.
05 -i, --instance Unique identifier for a running instance.
+
06  
+
  product_code The product code to verify.
07 product_code The product code to verify.
+
08  
+
  OPTIONAL PARAMETERS
09 OPTIONAL PARAMETERS
+
10  
+
  -a, --access-key User's Access Key ID.
11 -a, --access-key User's Access Key ID.
+
12  
+
  -s, --secret-key User's Secret Key.
13 -s, --secret-key User's Secret Key.
+
14  
+
  -U, --url URL of the Cloud to connect to.
15 -U, --url URL of the Cloud to connect to.
+
16  
+
  --config Read credentials and cloud settings from the
17 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
18 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
19  
+
  -h, --help Display this help message.
20 -h, --help Display this help message.
+
21  
+
  --version Display the version of this tool.
22 --version Display the version of this tool.
+
23  
+
  --debug Turn on debugging.
24 --debug Turn on debugging.
+
 
Storage Management
+
 
euca-attach-volume
+
==Storage Management==
 +
 
 +
===euca-attach-volume===
  
 
Attaches a volume to an instance.
 
Attaches a volume to an instance.
view source
+
 
print?
+
euca-attach-volume -i, --instance instance_id -d, --device device
01 euca-attach-volume -i, --instance instance_id -d, --device device
+
[-h, --help] [--version] [--debug] volume_id
02 [-h, --help] [--version] [--debug] volume_id
+
03  
+
  REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05  
+
  -i, --instance unique id of a running instance to attach the volume to.
06 -i, --instance unique id of a running instance to attach the volume to.
+
07  
+
  -d, --device local device name (inside the guest VM) to use.
08 -d, --device local device name (inside the guest VM) to use.
+
 
09  
+
  volume_id unique id for a volume to attach.
10 volume_id unique id for a volume to attach.
+
11  
+
  OPTIONAL PARAMETERS
12 OPTIONAL PARAMETERS
+
13  
+
  -a, --access-key User's Access Key ID.
14 -a, --access-key User's Access Key ID.
+
15  
+
  -s, --secret-key User's Secret Key.
16 -s, --secret-key User's Secret Key.
+
17  
+
  -U, --url URL of the Cloud to connect to.
18 -U, --url URL of the Cloud to connect to.
+
19  
+
  --config Read credentials and cloud settings from the
20 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
21 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
22  
+
  -h, --help Display this help message.
23 -h, --help Display this help message.
+
24  
+
  --version Display the version of this tool.
25 --version Display the version of this tool.
+
26  
+
  --debug Turn on debugging.
27 --debug Turn on debugging.
+
 
euca-create-volume
+
 
 +
===euca-create-volume===
  
 
Creates a volume in a specified availability zone.
 
Creates a volume in a specified availability zone.
view source
+
 
print?
+
euca-create-volume -S, --size size | --snapshot snapshot_id -z zone
01 euca-create-volume -S, --size size | --snapshot snapshot_id -z zone
+
[-h, --help] [--version] [--debug]
02 [-h, --help] [--version] [--debug]
+
03  
+
  REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05  
+
  -s, --size size of the volume (in GiB).
06 -s, --size size of the volume (in GiB).
+
07  
+
  --snapshot snapshot id to create the volume from. Either size or snapshot can be specified (not both).
08 --snapshot snapshot id to create the volume from. Either size or snapshot can be specified (not both).
+
09  
+
  -z, --zone availability zone to create the volume in
10 -z, --zone availability zone to create the volume in
+
11  
+
  OPTIONAL PARAMETERS
12 OPTIONAL PARAMETERS
+
13  
+
  -A, --access-key User's Access Key ID.
14 -A, --access-key User's Access Key ID.
+
15  
+
  -S, --secret-key User's Secret Key.
16 -S, --secret-key User's Secret Key.
+
17  
+
  -U, --url URL of the Cloud to connect to.
18 -U, --url URL of the Cloud to connect to.
+
19  
+
  --config Read credentials and cloud settings from the
20 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
21 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
22  
+
  -h, --help Display this help message.
23 -h, --help Display this help message.
+
24  
+
  --version Display the version of this tool.
25 --version Display the version of this tool.
+
26  
+
  --debug Turn on debugging.
27 --debug Turn on debugging.
+
 
euca-delete-volume
+
 
 +
===euca-delete-volume===
  
 
Deletes a volume.
 
Deletes a volume.
view source
+
 
print?
+
euca-delete-volume [-h, --help] [--version] [--debug] volume_id
01 euca-delete-volume [-h, --help] [--version] [--debug] volume_id
+
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  volume_id unique identifier for the volume to be deleted.
05 volume_id unique identifier for the volume to be deleted.
+
06  
+
  OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08  
+
  -a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10  
+
  -s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  --config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17  
+
  -h, --help Display this help message.
18 -h, --help Display this help message.
+
19  
+
  --version Display the version of this tool.
20 --version Display the version of this tool.
+
21  
+
  --debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-describe-volumes
+
 
 +
===euca-describe-volumes===
  
 
Shows information about volumes.
 
Shows information about volumes.
view source
+
 
print?
+
euca-describe-volumes [-h, --help] [--version] [--debug]
01 euca-describe-volumes [-h, --help] [--version] [--debug]
+
[volume1 volume2...volumeN]
02 [volume1 volume2...volumeN]
+
03  
+
  OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05  
+
  volume1 volume2...volumeN volumes to describe.
06 volume1 volume2...volumeN volumes to describe.
+
07  
+
  -a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09  
+
  -s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11  
+
  -U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13  
+
  --config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16  
+
  -h, --help Display this help message.
17 -h, --help Display this help message.
+
18  
+
  --version Display the version of this tool.
19 --version Display the version of this tool.
+
20  
+
  --debug Turn on debugging.
21 --debug Turn on debugging.
+
 
euca-detach-volume
+
 
 +
===euca-detach-volume===
  
 
Detaches a volume from an instance.
 
Detaches a volume from an instance.
view source
+
 
print?
+
euca-detach-volume [-h, --help] [--version] [--debug] volume_id
01 euca-detach-volume [-h, --help] [--version] [--debug] volume_id
+
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  volume_id unique id for a volume to detach.
05 volume_id unique id for a volume to detach.
+
06  
+
  OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08  
+
  -a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10  
+
  -s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  --config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17  
+
  -h, --help Display this help message.
18 -h, --help Display this help message.
+
19  
+
  --version Display the version of this tool.
20 --version Display the version of this tool.
+
21  
+
  --debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-create-snapshot
+
 
 +
===euca-create-snapshot===
  
 
Creates a snapshot from an existing volume.
 
Creates a snapshot from an existing volume.
view source
+
 
print?
+
euca-create-snapshot [-h, --help] [--version] [--debug] volume_id
01 euca-create-snapshot [-h, --help] [--version] [--debug] volume_id
+
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  volume_id unique id for a volume to snapshot.
05 volume_id unique id for a volume to snapshot.
+
06  
+
  OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08  
+
  -a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10  
+
  -s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  --config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17  
+
  -h, --help Display this help message.
18 -h, --help Display this help message.
+
19  
+
  --version Display the version of this tool.
20 --version Display the version of this tool.
+
21  
+
  --debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-delete-snapshot
+
 
 +
===euca-delete-snapshot===
  
 
Deletes a snapshot.
 
Deletes a snapshot.
view source
+
 
print?
+
euca-delete-snapshot [-h, --help] [--version] [--debug] snapshot_id
01 euca-delete-snapshot [-h, --help] [--version] [--debug] snapshot_id
+
02  
+
  REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04  
+
  snapshot_id unique identifier for the snapshot to be deleted.
05 snapshot_id unique identifier for the snapshot to be deleted.
+
06  
+
  OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08  
+
  -a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10  
+
  -s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12  
+
  -U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14  
+
  --config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17  
+
  -h, --help Display this help message.
18 -h, --help Display this help message.
+
19  
+
  --version Display the version of this tool.
20 --version Display the version of this tool.
+
21  
+
  --debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-describe-snapshots
+
 
 +
===euca-describe-snapshots===
  
 
Shows information about snapshots.
 
Shows information about snapshots.
view source
+
 
print?
+
euca-describe-snapshots [-h, --help] [--version] [--debug]
01 euca-describe-snapshots [-h, --help] [--version] [--debug]
+
[snapshot1 snapshot2...snapshotN]
02 [snapshot1 snapshot2...snapshotN]
+
03
+
OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05
+
snapshot1 snapshot2...snapshotN - snapshots to describe.
06 snapshot1 snapshot2...snapshotN - snapshots to describe.
+
07
+
-a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09
+
-s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11
+
-U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13
+
--config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16
+
-h, --help Display this help message.
17 -h, --help Display this help message.
+
18
+
--version Display the version of this tool.
19 --version Display the version of this tool.
+
20
+
--debug Turn on debugging.
21 --debug Turn on debugging.
+
 
Network Management
+
 
euca-allocate-address
+
==Network Management==
 +
 
 +
===euca-allocate-address===
  
 
Allocate a public IP address.
 
Allocate a public IP address.
view source
+
 
print?
+
euca-allocate-address [-h, --help] [--version] [--debug]
01 euca-allocate-address [-h, --help] [--version] [--debug]
+
02
+
OPTIONAL PARAMETERS
03 OPTIONAL PARAMETERS
+
04
+
-a, --access-key User's Access Key ID.
05 -a, --access-key User's Access Key ID.
+
06
+
-s, --secret-key User's Secret Key.
07 -s, --secret-key User's Secret Key.
+
08
+
-U, --url URL of the Cloud to connect to.
09 -U, --url URL of the Cloud to connect to.
+
10
+
--config Read credentials and cloud settings from the
11 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
12 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
13
+
-h, --help Display this help message.
14 -h, --help Display this help message.
+
15
+
--version Display the version of this tool.
16 --version Display the version of this tool.
+
17
+
--debug Turn on debugging.
18 --debug Turn on debugging.
+
 
euca-associate-address
+
 
 +
===euca-associate-address===
  
 
Associate an instance with a public IP address.
 
Associate an instance with a public IP address.
view source
+
 
print?
+
euca-associate-address -i, --instance instance_id
01 euca-associate-address -i, --instance instance_id
+
[-h, --help] [--version] [--debug] ip
02 [-h, --help] [--version] [--debug] ip
+
03
+
REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05
+
-i, --instance unique identifier for a running instance to associate the address with.
06 -i, --instance unique identifier for a running instance to associate the address with.
+
07
+
ip IP address to associate.
08 ip IP address to associate.
+
09
+
OPTIONAL PARAMETERS
10 OPTIONAL PARAMETERS
+
11
+
-a, --access-key user's Access Key ID.
12 -a, --access-key user's Access Key ID.
+
13
+
-s, --secret-key user's Secret Key.
14 -s, --secret-key user's Secret Key.
+
15
+
-U, --url URL of the Cloud to connect to.
16 -U, --url URL of the Cloud to connect to.
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-describe-addresses
+
 
 +
===euca-describe-addresses===
  
 
Shows information about addresses.
 
Shows information about addresses.
view source
+
 
print?
+
euca-describe-addresses [-h, --help] [--version] [--debug] [ip1 ip2...ipN]
01 euca-describe-addresses [-h, --help] [--version] [--debug] [ip1 ip2...ipN]
+
02
+
OPTIONAL PARAMETERS
03 OPTIONAL PARAMETERS
+
04
+
ip1 ip2...ipN IP addresses to display information about.
05 ip1 ip2...ipN IP addresses to display information about.
+
06
+
-a, --access-key User's Access Key ID.
07 -a, --access-key User's Access Key ID.
+
08
+
-s, --secret-key User's Secret Key.
09 -s, --secret-key User's Secret Key.
+
10
+
-U, --url URL of the Cloud to connect to.
11 -U, --url URL of the Cloud to connect to.
+
12
+
--config Read credentials and cloud settings from the
13 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
14 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
15
+
-h, --help Display this help message.
16 -h, --help Display this help message.
+
17
+
--version Display the version of this tool.
18 --version Display the version of this tool.
+
19
+
--debug Turn on debugging.
20 --debug Turn on debugging.
+
 
euca-disassociate-address
+
 
 +
===euca-disassociate-address===
  
 
Disassociate a public IP address from an instance.
 
Disassociate a public IP address from an instance.
view source
+
 
print?
+
euca-disassociate-address [-h, --help] [--version] [--debug] ip
01 euca-disassociate-address [-h, --help] [--version] [--debug] ip
+
02
+
REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04
+
ip IP address to disassociate.
05 ip IP address to disassociate.
+
06
+
OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-release-address
+
 
 +
===euca-release-address===
  
 
Releases a public IP address.
 
Releases a public IP address.
view source
+
 
print?
+
euca-release-address [-h, --help] [--version] [--debug] ip
01 euca-release-address [-h, --help] [--version] [--debug] ip
+
02
+
REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04
+
ip The public IP address to release.
05 ip The public IP address to release.
+
06
+
OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
Security
+
 
euca-add-group
+
==Security==
 +
 
 +
===euca-add-group===
  
 
Creates a new security group.
 
Creates a new security group.
view source
+
 
print?
+
euca-add-group -d, --description group_description
01 euca-add-group -d, --description group_description
+
[-h, --help] [--version] [--debug] group_name
02 [-h, --help] [--version] [--debug] group_name
+
03
+
REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05
+
-d, --description Description for the group to be created.
06 -d, --description Description for the group to be created.
+
07
+
OPTIONAL PARAMETERS
08 OPTIONAL PARAMETERS
+
09
+
-a, --access-key User's Access Key ID.
10 -a, --access-key User's Access Key ID.
+
11
+
-s, --secret-key User's Secret Key.
12 -s, --secret-key User's Secret Key.
+
13
+
-U, --url URL of the Cloud to connect to.
14 -U, --url URL of the Cloud to connect to.
+
15
+
--config Read credentials and cloud settings from the
16 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
17 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
18
+
-h, --help Display this help message.
19 -h, --help Display this help message.
+
20
+
--version Display the version of this tool.
21 --version Display the version of this tool.
+
22
+
--debug Turn on debugging.
23 --debug Turn on debugging.
+
 
euca-delete-group
+
 
 +
===euca-delete-group===
  
 
Deletes a security group.
 
Deletes a security group.
view source
+
 
print?
+
euca-delete-group [-h, --help] [--version] [--debug] group_name
01 euca-delete-group [-h, --help] [--version] [--debug] group_name
+
02
+
REQUIRED PARAMETER
03 REQUIRED PARAMETER
+
04
+
group_name unique name for a group to delete.
05 group_name unique name for a group to delete.
+
06
+
OPTIONAL PARAMETER
07 OPTIONAL PARAMETER
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-describe-groups
+
 
 +
===euca-describe-groups===
  
 
Shows information about groups.
 
Shows information about groups.
view source
+
 
print?
+
euca-describe-groups [-h, --help] [--version] [--debug] [group1 group2...groupN]
01 euca-describe-groups [-h, --help] [--version] [--debug] [group1 group2...groupN]
+
02
+
OPTIONAL PARAMETERS
03 OPTIONAL PARAMETERS
+
04
+
group1 group2...groupN groups to describe.
05 group1 group2...groupN groups to describe.
+
06
+
-a, --access-key User's Access Key ID.
07 -a, --access-key User's Access Key ID.
+
08
+
-s, --secret-key User's Secret Key.
09 -s, --secret-key User's Secret Key.
+
10
+
-U, --url URL of the Cloud to connect to.
11 -U, --url URL of the Cloud to connect to.
+
12
+
--config Read credentials and cloud settings from the
13 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
14 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
15
+
-h, --help Display this help message.
16 -h, --help Display this help message.
+
17
+
--version Display the version of this tool.
18 --version Display the version of this tool.
+
19
+
--debug Turn on debugging.
20 --debug Turn on debugging.
+
 
euca-add-keypair
+
 
 +
===euca-add-keypair===
  
 
Creates a new key pair for use with instances.
 
Creates a new key pair for use with instances.
view source
+
 
print?
+
euca-add-keypair [-h, --help] [--version] [--debug] keypair_name
01 euca-add-keypair [-h, --help] [--version] [--debug] keypair_name
+
02
+
REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04
+
keypair_name - unique name for a keypair to create.
05 keypair_name - unique name for a keypair to create.
+
06
+
OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-delete-keypair
+
 
 +
===euca-delete-keypair===
  
 
Delete a key pair.
 
Delete a key pair.
view source
+
 
print?
+
euca-delete-keypair [-h, --help] [--version] [--debug] keypair_name
01 euca-delete-keypair [-h, --help] [--version] [--debug] keypair_name
+
02
+
REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04
+
keypair_name unique name for the keypair to delete.
05 keypair_name unique name for the keypair to delete.
+
06
+
OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-describe-keypairs
+
 
 +
===euca-describe-keypairs===
  
 
Shows information about keypairs.
 
Shows information about keypairs.
view source
+
 
print?
+
euca-describe-keypairs [-h, --help] [--version] [--debug]
01 euca-describe-keypairs [-h, --help] [--version] [--debug]
+
[keypair1 keypair2...keypairN]
02 [keypair1 keypair2...keypairN]
+
03
+
OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05
+
keypair1 keypair2...keypairN keypairs to describe.
06 keypair1 keypair2...keypairN keypairs to describe.
+
07
+
-a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09
+
-s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11
+
-U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13
+
--config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16
+
-h, --help Display this help message.
17 -h, --help Display this help message.
+
18
+
--version Display the version of this tool.
19 --version Display the version of this tool.
+
20
+
--debug Turn on debugging.
21 --debug Turn on debugging.
+
 
euca-describe-availability-zones
+
 
 +
===euca-describe-availability-zones===
  
 
Shows information about availability zones.
 
Shows information about availability zones.
view source
+
 
print?
+
euca-describe-availability-zones [--region region] [-h, --help] [--version] [--debug] [zone1 zone2...zoneN] [verbose]
01 euca-describe-availability-zones [--region region] [-h, --help] [--version] [--debug] [zone1 zone2...zoneN] [verbose]
+
02
+
OPTIONAL PARAMETERS
03 OPTIONAL PARAMETERS
+
04
+
--region region to describe availability zones for
05 --region region to describe availability zones for
+
06
+
zone1 zone2...zoneN zones to describe.
07 zone1 zone2...zoneN zones to describe.
+
08
+
verbose show verbose resource information (Eucalyptus administrator-only functionality).
09 verbose show verbose resource information (Eucalyptus administrator-only functionality).
+
10
+
-a, --access-key User's Access Key ID.
11 -a, --access-key User's Access Key ID.
+
12
+
-s, --secret-key User's Secret Key.
13 -s, --secret-key User's Secret Key.
+
14
+
-U, --url URL of the Cloud to connect to.
15 -U, --url URL of the Cloud to connect to.
+
16
+
--config Read credentials and cloud settings from the
17 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
18 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
19
+
-h, --help Display this help message.
20 -h, --help Display this help message.
+
21
+
--version Display the version of this tool.
22 --version Display the version of this tool.
+
23
+
--debug Turn on debugging.
24 --debug Turn on debugging.
+
 
euca-describe-regions
+
 
 +
===euca-describe-regions===
  
 
Shows information about regions.
 
Shows information about regions.
view source
+
 
print?
+
euca-describe-regions [-h, --help] [--version] [--debug]
01 euca-describe-regions [-h, --help] [--version] [--debug]
+
[region1 region2...regionN]
02 [region1 region2...regionN]
+
03
+
OPTIONAL PARAMETERS
04 OPTIONAL PARAMETERS
+
05
+
region1 region2...regionN regions to describe.
06 region1 region2...regionN regions to describe.
+
07
+
-a, --access-key User's Access Key ID.
08 -a, --access-key User's Access Key ID.
+
09
+
-s, --secret-key User's Secret Key.
10 -s, --secret-key User's Secret Key.
+
11
+
-U, --url URL of the Cloud to connect to.
12 -U, --url URL of the Cloud to connect to.
+
13
+
--config Read credentials and cloud settings from the
14 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
15 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
16
+
-h, --help Display this help message.
17 -h, --help Display this help message.
+
18
+
--version Display the version of this tool.
19 --version Display the version of this tool.
+
20
+
--debug Turn on debugging.
21 --debug Turn on debugging.
+
 
euca-get-console-output
+
 
 +
===euca-get-console-output===
  
 
Prints console output from a running instance.
 
Prints console output from a running instance.
view source
+
 
print?
+
euca-get-console-output [-h, --help] [--version] [--debug] instance_id
01 euca-get-console-output [-h, --help] [--version] [--debug] instance_id
+
02
+
REQUIRED PARAMETERS
03 REQUIRED PARAMETERS
+
04
+
instance_id unique identifier for the instance show the console output for.
05 instance_id unique identifier for the instance show the console output for.
+
06
+
OPTIONAL PARAMETERS
07 OPTIONAL PARAMETERS
+
08
+
-a, --access-key User's Access Key ID.
09 -a, --access-key User's Access Key ID.
+
10
+
-s, --secret-key User's Secret Key.
11 -s, --secret-key User's Secret Key.
+
12
+
-U, --url URL of the Cloud to connect to.
13 -U, --url URL of the Cloud to connect to.
+
14
+
--config Read credentials and cloud settings from the
15 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
17
+
-h, --help Display this help message.
18 -h, --help Display this help message.
+
19
+
--version Display the version of this tool.
20 --version Display the version of this tool.
+
21
+
--debug Turn on debugging.
22 --debug Turn on debugging.
+
 
euca-modify-image-attribute
+
 
 +
===euca-modify-image-attribute===
  
 
Modify attributes for an image.
 
Modify attributes for an image.
view source
+
 
print?
+
euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code]
01 euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code]
+
[-a, --add entity ] [-r, --remove entity]
02 [-a, --add entity ] [-r, --remove entity]
+
[-h, --help] [--version] [--debug] image_id
03 [-h, --help] [--version] [--debug] image_id
+
04
+
REQUIRED PARAMETERS
05 REQUIRED PARAMETERS
+
06
+
image_id Unique identifier for the image that you want to modify the attributes for.
07 image_id Unique identifier for the image that you want to modify the attributes for.
+
08
+
OPTIONAL PARAMETERS
09 OPTIONAL PARAMETERS
+
10
+
-l, --launch-permission Show launch permissions.
11 -l, --launch-permission Show launch permissions.
+
12
+
-p, --product-code Show the product codes associated with the image
13 -p, --product-code Show the product codes associated with the image
+
14
+
-a, -add Entity (typically, user id) to add.
15 -a, -add Entity (typically, user id) to add.
+
16
+
-r, --remove Entity (typically, user id) to remove.
17 -r, --remove Entity (typically, user id) to remove.
+
18
+
-A, --access-key User's Access Key ID.
19 -A, --access-key User's Access Key ID.
+
20
+
-S, --secret-key User's Secret Key.
21 -S, --secret-key User's Secret Key.
+
22
+
-U, --url URL of the Cloud to connect to.
23 -U, --url URL of the Cloud to connect to.
+
24
+
--config Read credentials and cloud settings from the
25 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
26 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
27
+
-h, --help Display this help message.
28 -h, --help Display this help message.
+
29
+
--version Display the version of this tool.
30 --version Display the version of this tool.
+
31
+
--debug Turn on debugging.
32 --debug Turn on debugging.
+
 
euca-reset-image-attribute
+
 
 +
===euca-reset-image-attribute===
  
 
Reset attributes for an image.
 
Reset attributes for an image.
view source
+
 
print?
+
euca-reset-image-attribute -l, --launch-permission
01 euca-reset-image-attribute -l, --launch-permission
+
[-h, --help] [--version] [--debug] image_id
02 [-h, --help] [--version] [--debug] image_id
+
03
+
REQUIRED PARAMETERS
04 REQUIRED PARAMETERS
+
05
+
-l, --launch-permission show launch permissions.
06 -l, --launch-permission show launch permissions.
+
07
+
image_id - unique identifier for the image that you want to reset the attributes for.
08 image_id - unique identifier for the image that you want to reset the attributes for.
+
09
+
OPTIONAL PARAMETERS
10 OPTIONAL PARAMETERS
+
11
+
-a, --access-key User's Access Key ID.
12 -a, --access-key User's Access Key ID.
+
13
+
-s, --secret-key User's Secret Key.
14 -s, --secret-key User's Secret Key.
+
15
+
-U, --url URL of the Cloud to connect to.
16 -U, --url URL of the Cloud to connect to.
+
17
+
--config Read credentials and cloud settings from the
18 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
19 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
20
+
-h, --help Display this help message.
21 -h, --help Display this help message.
+
22
+
--version Display the version of this tool.
23 --version Display the version of this tool.
+
24
+
--debug Turn on debugging.
25 --debug Turn on debugging.
+
 
euca-revoke
+
 
 +
===euca-revoke===
  
 
Revoke a rule for a security group.
 
Revoke a rule for a security group.
view source
+
 
print?
+
euca-revoke [-P | --protocol protocol] [-p | --port-range port_range]
01 euca-revoke [-P | --protocol protocol] [-p | --port-range port_range]
+
[-t | --icmp-type-code type:code] [-o | --source-group source_group]
02 [-t | --icmp-type-code type:code] [-o | --source-group source_group]
+
[-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet]
03 [-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet]
+
[-h, --help] [--version] [--debug] group_name
04 [-h, --help] [--version] [--debug] group_name
+
05
+
REQUIRED PARAMETERS
06 REQUIRED PARAMETERS
+
07
+
group_name Name of the group to add the rule to.
08 group_name Name of the group to add the rule to.
+
09
+
OPTIONAL PARAMETERS
10 OPTIONAL PARAMETERS
+
11
+
-P, --protocol Protocol ("tcp" "udp" or "icmp").
12 -P, --protocol Protocol ("tcp" "udp" or "icmp").
+
13
+
-p, --port-range Range of ports for the rule (specified as "from-to").
14 -p, --port-range Range of ports for the rule (specified as "from-to").
+
15
+
-t, --icmp-type-code ICMP type and code specified as "type:code"
16 -t, --icmp-type-code ICMP type and code specified as "type:code"
+
17
+
-o, --source-group Group from which traffic is authorized by the rule.
18 -o, --source-group Group from which traffic is authorized by the rule.
+
19
+
-u, --source-group-user User ID for the source group.
20 -u, --source-group-user User ID for the source group.
+
21
+
-s, --source-subnet The source subnet for the rule.
22 -s, --source-subnet The source subnet for the rule.
+
23
+
-A, --access-key User's Access Key ID.
24 -A, --access-key User's Access Key ID.
+
25
+
-S, --secret-key User's Secret Key.
26 -S, --secret-key User's Secret Key.
+
27
+
-U, --url URL of the Cloud to connect to.
28 -U, --url URL of the Cloud to connect to.
+
29
+
--config Read credentials and cloud settings from the
30 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
31 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
32
+
-h, --help Display this help message.
33 -h, --help Display this help message.
+
34
+
--version Display the version of this tool.
35 --version Display the version of this tool.
+
36
+
--debug Turn on debugging.
37 --debug Turn on debugging.
+
 
euca-version
+
 
 +
===euca-version===
  
 
Shows the Euca2ools version
 
Shows the Euca2ools version
view source
+
 
print?
+
euca-version [-h, --help] [--debug]
1 euca-version [-h, --help] [--debug]
+
 
euca-authorize
+
 
 +
===euca-authorize===
  
 
Add a new rule to a security group.
 
Add a new rule to a security group.
view source
+
 
print?
+
euca-authorize [-P, --protocol protocol] [-p, --port-range port_range]
01 euca-authorize [-P, --protocol protocol] [-p, --port-range port_range]
+
[-t, --icmp-type-code type:code] [-o, --source-group source_group]
02 [-t, --icmp-type-code type:code] [-o, --source-group source_group]
+
[-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet]
03 [-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet]
+
[-h, --help] [--version] [--debug] group_name
04 [-h, --help] [--version] [--debug] group_name
+
05
+
REQUIRED PARAMETERS
06 REQUIRED PARAMETERS
+
07
+
group_name Name of the group to add the rule to.
08 group_name Name of the group to add the rule to.
+
09
+
OPTIONAL PARAMETERS
10 OPTIONAL PARAMETERS
+
11
+
-P, --protocol Protocol ("tcp" "udp" or "icmp").
12 -P, --protocol Protocol ("tcp" "udp" or "icmp").
+
13
+
-p, --port-range Range of ports for the rule (specified as "from-to").
14 -p, --port-range Range of ports for the rule (specified as "from-to").
+
15
+
-t, --icmp-type-code ICMP type and code specified as "type:code"
16 -t, --icmp-type-code ICMP type and code specified as "type:code"
+
17
+
-o, --source-group Group from which traffic is authorized by the rule.
18 -o, --source-group Group from which traffic is authorized by the rule.
+
19
+
-u, --source-group-user User ID for the source group.
20 -u, --source-group-user User ID for the source group.
+
21
+
-s, --source-subnet The source subnet for the rule.
22 -s, --source-subnet The source subnet for the rule.
+
23
+
-A, --access-key User's Access Key ID.
24 -A, --access-key User's Access Key ID.
+
25
+
-S, --secret-key User's Secret Key.
26 -S, --secret-key User's Secret Key.
+
27
+
-U, --url URL of the Cloud to connect to.
28 -U, --url URL of the Cloud to connect to.
+
29
+
--config Read credentials and cloud settings from the
30 --config Read credentials and cloud settings from the
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
31 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
32
+
-h, --help Display this help message.
33 -h, --help Display this help message.
+
34
+
--version Display the version of this tool.
35 --version Display the version of this tool.
+
36
+
--debug Turn on debugging.
37 --debug Turn on debugging.
+
38
+
Commands Available in UEC and not available in Eucalyptus installations
39 Commands Available in UEC and not available in Eucalyptus installations
+
 
Uec-publish-tarball
+
 
view source
+
===Uec-publish-tarball===
print?
+
 
01 Usage: uec-publish-tarball [ options ] tarfile bucket [arch]
+
Usage: uec-publish-tarball [ options ] tarfile bucket [arch]
02
+
03 register a UEC tarball (ie, per http://uec-images.ubuntu.com)
+
register a UEC tarball (ie, per http://uec-images.ubuntu.com)
04
+
05 if arch is not provided, a name-based attempt is made to guess
+
if arch is not provided, a name-based attempt is made to guess
06 options:
+
options:
07
+
08 -k | --kernel  k        use previously registered kernel with id 'k'
+
-k | --kernel  k        use previously registered kernel with id 'k'
09
+
10 specify 'none' for no kernel
+
specify 'none' for no kernel
11
+
12 -K | --kernel-file f    bundle, upload, use file 'f' as kernel
+
-K | --kernel-file f    bundle, upload, use file 'f' as kernel
13
+
14 -r | --ramdisk r        use previously registered ramdisk with id 'r'
+
-r | --ramdisk r        use previously registered ramdisk with id 'r'
15
+
16 specify 'none' for no ramdisk
+
specify 'none' for no ramdisk
17
+
18 -R | --ramdisk-file f  bundle, upload, use file 'f' as ramdisk
+
-R | --ramdisk-file f  bundle, upload, use file 'f' as ramdisk
19 --resize  s        resize the image to 's' bundling uploading
+
--resize  s        resize the image to 's' bundling uploading
20
+
21 's' must be valid input to uec-resize-image
+
's' must be valid input to uec-resize-image
22
+
23 -q | --quiet            be quiet, only output published ids
+
-q | --quiet            be quiet, only output published ids
24 Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386
+
Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386
uec-registration
+
 
view source
+
 
print?
+
===uec-registration===
1 uec-registration [--manual|--auto|--help]
+
 
2  
+
uec-registration [--manual|--auto|--help]
3 Options:
+
 
4
+
  Options:
5 --manual      Disable automatic component registration
+
6
+
  --manual      Disable automatic component registration
7 --auto        Enable automatic component registration
+
8
+
  --auto        Enable automatic component registration
9 -h, --help    This message
+
uec-run-instances
+
  -h, --help    This message
view source
+
 
print?
+
 
1 Same as euca-run-instances
+
===uec-run-instances===
uec-publish-image
+
 
view source
+
Same as euca-run-instances
print?
+
 
01 Usage: uec-publish-image [ options ] arch image bucket
+
 
02  
+
===uec-publish-image===
03 arch          : one of i386 or x86_64
+
 
04  
+
Usage: uec-publish-image [ options ] arch image bucket
05 image          : the image to upload and register
+
06  
+
  arch          : one of i386 or x86_64
07 bucket        : bucket to publish image to
+
   
08 options:
+
image          : the image to upload and register
09
+
10 l|-add-launch <user_id>  : user_id can be "all", or "none"
+
  bucket        : bucket to publish image to
11
+
 
12 --dry-run                : only report what would be done
+
options:
13
+
14 --allow-existing        : if a image is already registered
+
  l|-add-launch <user_id>  : user_id can be "all", or "none"
15
+
16 simply report as if work was done
+
  --dry-run                : only report what would be done
17
+
18 o|-output <file>          : write registered id and manifest to file
+
  --allow-existing        : if a image is already registered
19 |--rename <publish_path>  : publish to bucket/<publish_path>
+
20
+
  simply report as if work was done
21 default: bucket/<basename(image)>
+
22
+
  o|-output <file>          : write registered id and manifest to file
23 t|-type  <type>          : type is one of kernel/ramdisk/image
+
  |--rename <publish_path>  : publish to bucket/<publish_path>
24
+
25 v|-verbose                : increase verbosity
+
  default: bucket/<basename(image)>
26 if type is 'image', then:
+
27
+
  t|-type  <type>          : type is one of kernel/ramdisk/image
28 -k | --kernel  k        : use previously registered kernel with id 'k'
+
29
+
  v|-verbose                : increase verbosity
30 specify 'none' for no kernel
+
31  
+
if type is 'image', then:
32 -K | --kernel-file f    : bundle, upload, use file 'f' as kernel
+
33
+
  -k | --kernel  k        : use previously registered kernel with id 'k' specify 'none' for no kernel
34 -r | --ramdisk r        : use previously registered ramdisk with id 'r'
+
   
35
+
  -K | --kernel-file f    : bundle, upload, use file 'f' as kernel
36 specify 'none' for no ramdisk
+
37
+
  -r | --ramdisk r        : use previously registered ramdisk with id 'r' specify 'none' for no ramdisk
38 -R | --ramdisk-file f  : bundle, upload, use file 'f' as ramdisk
+
39
+
  -R | --ramdisk-file f  : bundle, upload, use file 'f' as ramdisk
40 -B | --block-device-mapping m : specify block device mapping in bundle
+
uec-query-builds
+
  -B | --block-device-mapping m : specify block device mapping in bundle
view source
+
 
print?
+
 
01 Usage: uec-query-builds [options]
+
===uec-query-builds===
02  
+
 
03 Options:
+
Usage: uec-query-builds [options]
04 -h, --help show this help message and exit
+
05 --suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
+
  Options:
06 --build-name=BUILD_NAME
+
-h, --help show this help message and exit
07 build name ('server', 'desktop' ..)
+
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
08 --stream=STREAM stream query ('released', 'daily')
+
--build-name=BUILD_NAME
09 --base-url=BASE_URL the base url to query
+
build name ('server', 'desktop' ..)
10 --output=FILE write output to file, default is stdout
+
--stream=STREAM stream query ('released', 'daily')
11 --serial=SERIAL build serial serial to use (YYYYMMDD)
+
--base-url=BASE_URL the base url to query
12 --system-suite use output of 'lsb_release --codename --short' for
+
--output=FILE write output to file, default is stdout
13 suite
+
--serial=SERIAL build serial serial to use (YYYYMMDD)
14 --config=CONFIG yaml config file to read
+
--system-suite use output of 'lsb_release --codename --short' for suite
15 --region=REGION the ec2 region to query
+
--config=CONFIG yaml config file to read
16 --img-type=TYPE the ec2 image type (one of: ebs, instance)
+
--region=REGION the ec2 region to query
17 --arch=ARCH the architecture. (one of: i386, amd64)
+
--img-type=TYPE the ec2 image type (one of: ebs, instance)
uec-resize-image
+
--arch=ARCH the architecture. (one of: i386, amd64)
view source
+
 
print?
+
===uec-resize-image===
01 Usage: uec-query-builds [options]
+
 
02  
+
Usage: uec-query-builds [options]
03 Options:
+
04 -h, --help show this help message and exit
+
  Options:
05 --suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
+
-h, --help show this help message and exit
06 --build-name=BUILD_NAME
+
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
07 build name ('server', 'desktop' ..)
+
--build-name=BUILD_NAME
08 --stream=STREAM stream query ('released', 'daily')
+
build name ('server', 'desktop' ..)
09 --base-url=BASE_URL the base url to query
+
--stream=STREAM stream query ('released', 'daily')
10 --output=FILE write output to file, default is stdout
+
--base-url=BASE_URL the base url to query
11 --serial=SERIAL build serial serial to use (YYYYMMDD)
+
--output=FILE write output to file, default is stdout
12 --system-suite use output of 'lsb_release --codename --short' for
+
--serial=SERIAL build serial serial to use (YYYYMMDD)
13 suite
+
--system-suite use output of 'lsb_release --codename --short' for suite
14 --config=CONFIG yaml config file to read
+
--config=CONFIG yaml config file to read
15 --region=REGION the ec2 region to query
+
--region=REGION the ec2 region to query
16 --img-type=TYPE the ec2 image type (one of: ebs, instance)
+
--img-type=TYPE the ec2 image type (one of: ebs, instance)
17 --arch=ARCH the architecture. (one of: i386, amd64)
+
--arch=ARCH the architecture. (one of: i386, amd64)
18 uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help
+
 
19 Usage: uec-resize-image [ options ] image size [output]
+
uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help
20 Resize a UEC image to a new size.
+
 
21 if output is given, do not modify 'image', but create new file 'output'
+
Usage: uec-resize-image [ options ] image size [output]
22  
+
Resize a UEC image to a new size.
23 New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte
+
if output is given, do not modify 'image', but create new file 'output'
24 options:
+
25
+
  New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte
26 -v | --verbose    show command output
+
options:
 +
 +
  -v | --verbose    show command output
  
 
==Referensi==
 
==Referensi==
Line 1,427: Line 1,468:
 
==Pranala Menarik==
 
==Pranala Menarik==
  
* [[Ubuntu Enterprise Cloud: Eucalyptus Beginner’s Guide]] '''RECOMMENDED'''
+
* [[Ubuntu Enterprise Cloud: Panduan Untuk Pemula]] '''RECOMMENDED'''
 
* [[Ubuntu Enterprise Cloud: Instalasi UEC]]
 
* [[Ubuntu Enterprise Cloud: Instalasi UEC]]
 
* [[Cloud Computing]]
 
* [[Cloud Computing]]

Latest revision as of 10:16, 22 March 2011

Image Management

euca-bundle-image

Bundles an image for use with Eucalyptus or Amazon EC2.

euca-bundle-image -i, --image image_path -u, --user user [-c, --cert cert_path]
[-k, --privatekey private_key_path] [-p, --prefix prefix] [--kernel kernel_id]
[--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
[-d, --destination destination_path] [--ec2cert ec2cert_path]
[-r, --arch target_architecture] [--batch] [-h, --help] [--version] [--debug]
	 
REQUIRED PARAMETERS
	 
-i, --image Path to the image file to bundle.
	 
-u, --user User ID (12-digit) of the user who is bundling the image.
	 
OPTIONAL PARAMETERS
	 
-c, --cert Path to the user's PEM encoded certificate.
	 
-k, --privatekey Path to the user's PEM encoded private key.
	 
-p, --prefix The prefix for the bundle image files. (default: image name).
	 
--kernel The kernel to be associated with the bundled image.
	 
--ramdisk The ramdisk to be associated with the bundled image.
	 
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
	 
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
	 
--ec2cert The path to the Cloud's X509 public key certificate.
	 
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
	 
--batch Run in batch mode (compatibility only. has no effect).
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-bundle-vol

Bundle the local filesystem of a running instance as a bundled image.

euca-bundle-vol -u, --user user -s, --size size_in_MB
	 
[-c, --cert cert_path] [-k, --privatekey private_key_path]
	 
[-a, --all] [-e, --exclude dir1, dir2,...dirN] [-p, --prefix prefix] [--[no-]inherit] [-v, --volume volume_path] [--fstab fstab_path] [--generate-fstab] [--kernel kernel_id] [--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
	 
[-d, --destination destination_path] [--ec2cert ec2cert_path] [-r, --arch target_architecture] [--batch] [--version]
	 
REQUIRED PARAMETERS
	 
-u, --user User ID (12-digit) of the user who is bundling the image.
	 
-s, --size Size for the image in MB (default: 10GB or 10240MB).
	 
OPTIONAL PARAMETERS
	 
-c, --cert Path to the user's PEM encoded certificate.
	 
-k, --privatekey Path to the user's PEM encoded private key.
	 
-a, --all Bundle all directories (including mounted filesystems).
	 
-p, --prefix The prefix for the bundle image files. (default: image name).
	 
--[no-]inherit Add (or do not add) instance metadata to the bundled image. Inherit is set by default.
	 
-e, --exclude comma-separated list of directories to exclude.
	 
--kernel The kernel to be associated with the bundled image.
	 
--ramdisk The ramdisk to be associated with the bundled image.
	 
-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
	 
-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
	 
--ec2cert The path to the Cloud's X509 public key certificate.
	 
-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
	 
-v, --volume Path to mounted volume to create the bundle from (default: "/").
	 
--fstab Path to the fstab to be bundled into the image.
	 
--generate-fstab Generate fstab to bundle into the image.
	 
--batch Run in batch mode (compatibility only. has no effect).


euca-delete-bundle

Delete a previously uploaded bundle.

euca-delete-bundle -b, --bucket bucket [-m, --manifest manifest_path]
[-p, --prefix prefix] [--clear] [-h, --help] [--version] [--debug]
	 
REQUIRED PARAMETERS
	 
bucket The name of the bucket to delete from.
	 
OPTIONAL PARAMETERS
	 
-m, --manifest The path to the manifest file.
	 
-b, --bucket The bucket to delete the bundle from (if no
manifest is specified, all images from this
bucket will be deleted).
	 
-p, --prefix The filename prefix for bundled files. Defaults
to image name.
	 
--clear Delete the bucket containing the image.
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-download-bundle

Downloads a bundled image from a bucket.

euca-download-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-d, --directory directory]
[-h, --help] [--version] [--debug]
	 
REQUIRED PARAMETERS
	 
-b, --bucket The name of the bucket to download from.
	 
OPTIONAL PARAMETERS
	 
-m, --manifest The path to the manifest file.
	 
-d, --directory The name of the directory to download the bundled parts to.
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.

euca-unbundle

Unbundles a previously bundled image.

euca-unbundle-image -m, --manifest manifest_path [-k, --privatekey private_key_path]
[-s, --source source_directory] [-d, --destination destination_directory]
[-h, --help] [--version] [--debug]
	 
REQUIRED PARAMETERS
	 
-m, --manifest Path to the manifest file for the bundled image.
	 
OPTIONAL PARAMETERS
	 
-d, --destination Directory to store the image to (defaults to the current directory).
	 
-s, --source Source directory for the bundled image parts (defaults to manifest directory).
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-upload-bundle

Upload a previously bundled image to the cloud.

euca-upload-bundle -b, --bucket bucket -m, --manifest manifest_path [-a, --access-key access_key_id]
[-s, --secret-key secret_key] [--acl canned_acl] [--ec2cert ec2cert_path] [-d, --directory bundle_path]
[--part part] [--url url] [--skipmanifest] [--debug] [-h, --help] [--version]
	 
REQUIRED PARAMETERS
	 
-b, --bucket The name of the bucket to upload to. Bucket will be created if it does not exist.
	 
-m, --manifest The path to the manifest file for the bundled image.
	 
OPTIONAL PARAMETERS
	 
--acl Canned access control policy (defaults to "aws-exec-read").
	 
--ec2cert The path to the Cloud's X509 public key certificate.
	 
-d, --directory The directory containing the bundled image to upload (defaults to the manifest directory).
	 
--part Uploads specified part and all subsequent parts.
	 
--skipmanifest Do not upload the manifest file.
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.

euca-describe-images

Shows information about machine images.

euca-describe-images [-a] [-o owner] [-x user] [-h, --help] [--version] [--debug] [image1 image2 ... imageN]
	 
OPTIONAL PARAMETERS
	 
image1 image2 ... imageN Images to describe.
	 
-a Show all images that the user has access to.
	 
-o Show only images owned by the owner specified are displayed.
	 
-x Show only images that the specified user is permitted to launch.
	 
-A, --access-key User's Access Key ID.
	 
-S, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-describe-image-attribute

Show image attributes.

euca-describe-image-attribute [-l, --launch-permission] [-p, --product-code]
[-B, --block-device-mapping] [--kernel] [--ramdisk]
[-h, --help] [--version] [--debug] image_id
	 
REQUIRED PARAMETERS
	 
image_id unique identifier for the image that you want to retrieve the attributes for.
	 
OPTIONAL PARAMETERS
	 
-B, --block-device-mapping show block device mapping.
-l, --launch-permission show launch permissions.
-p, --product-code show the product codes associated with the image
--kernel show the kernel id associated with the image.
--ramdisk show the ramdisk id associated with the image.
	 
-a, --access-key user's Access Key ID.
	 
-s, --secret-key user's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.

euca-register

Registers a manifest for use with the cloud.

euca-register [-h, --help] [--version] [--debug] image_location
	 
REQUIRED PARAMETERS
	 
image_location - path to the uploaded image (bucket/manifest).
	 
OPTIONAL PARAMETERS
	 
-a, --access-key user's Access Key ID.
	 
-s, --secret-key user's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-deregister

Deregisters an image from the cloud.

euca-deregister [-h, --help] [--version] [--debug] image_id
REQUIRED PARAMETER
image_id unique identifier for the image to be deregistered.
OPTIONAL PARAMETER
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


Instance Management

euca-describe-instances

Shows information about instances.

euca-describe-instances [-h, --help] [--version] [--debug]
[instance1... instanceN]
OPTIONAL PARAMETERS
instance1... instanceN instances to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-reboot-instances

Reboots specified instances.

euca-reboot-instances [-h, --help] [--version] [--debug]
[instance1... instanceN]
OPTIONAL PARAMETERS
instance1... instanceN instances to reboot.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-run-instances

Starts instances.

euca-run-instances [-n, --instance-count count] [-g, --group group_name] [-k, --key keyname]
[--addressing addressing] [-t, --instance-type instance_type] [-z, --availability-zone zone]
[--kernel kernel_id] [--ramdisk ramdisk_id] [-h, --help] [--version] [--debug] image_id
	 
REQUIRED PARAMETERS
	 
image_id identifier for the image to run.
	 
OPTIONAL PARAMETERS
-n, --instance-count Number of instances to run.
-g, --group Security group to run the instance under.
-k, --key Name of a (previously created) keypair to associate with this reservation.
-d, --user-data User data for instances read from the command line.
-f, --user-data-file User data for instances as a filename.
--addressing Addressing mode (e.g., private).
-t, --instance-type VM Image type to run the instance(s) as (default: m1.small).
-z, --availability-zone Availability zone to run the instance(s) in.
--kernel Id of the kernel to be used to launch instance(s).
--ramdisk Id of the ramdisk to be used to launch instance(s).
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-terminate-instances

Stops specified instances.

euca-terminate-instances [-h, --help] [--version] [--debug]
[instance1... instanceN]
	 
REQUIRED PARAMETERS
	 
instance1... instanceN instances to terminate.
	 
OPTIONAL PARAMETERS
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.

--version Display the version of this tool.
	 
--debug Turn on debugging.


euca-confirm-product-instance

Confirm if instance is running with product code attached.

euca-confirm-product-instance i, --instance instance_id [-h, --help] [-version] [--debug] product_code
 
REQUIRED PARAMETERS
	 
-i, --instance Unique identifier for a running instance.
	 
product_code The product code to verify.
	 
OPTIONAL PARAMETERS
	 
-a, --access-key User's Access Key ID.
	 
-s, --secret-key User's Secret Key.
	 
-U, --url URL of the Cloud to connect to.
	 
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
-h, --help Display this help message.
	 
--version Display the version of this tool.
	 
--debug Turn on debugging.


Storage Management

euca-attach-volume

Attaches a volume to an instance.

euca-attach-volume -i, --instance instance_id -d, --device device
[-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
-i, --instance unique id of a running instance to attach the volume to.
-d, --device local device name (inside the guest VM) to use.
volume_id unique id for a volume to attach.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-create-volume

Creates a volume in a specified availability zone.

euca-create-volume -S, --size size | --snapshot snapshot_id -z zone
[-h, --help] [--version] [--debug]
REQUIRED PARAMETERS
-s, --size size of the volume (in GiB).
--snapshot snapshot id to create the volume from. Either size or snapshot can be specified (not both).
-z, --zone availability zone to create the volume in
OPTIONAL PARAMETERS
-A, --access-key User's Access Key ID.
-S, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
	 
--version Display the version of this tool.
--debug Turn on debugging.


euca-delete-volume

Deletes a volume.

euca-delete-volume [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique identifier for the volume to be deleted.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-describe-volumes

Shows information about volumes.

euca-describe-volumes [-h, --help] [--version] [--debug]
[volume1 volume2...volumeN]
OPTIONAL PARAMETERS
volume1 volume2...volumeN volumes to describe.
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-detach-volume

Detaches a volume from an instance.

euca-detach-volume [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique id for a volume to detach.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-create-snapshot

Creates a snapshot from an existing volume.

euca-create-snapshot [-h, --help] [--version] [--debug] volume_id
REQUIRED PARAMETERS
volume_id unique id for a volume to snapshot.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-delete-snapshot

Deletes a snapshot.

euca-delete-snapshot [-h, --help] [--version] [--debug] snapshot_id
REQUIRED PARAMETERS
snapshot_id unique identifier for the snapshot to be deleted.
OPTIONAL PARAMETERS
-a, --access-key User's Access Key ID.
-s, --secret-key User's Secret Key.
-U, --url URL of the Cloud to connect to.
--config Read credentials and cloud settings from the
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
-h, --help Display this help message.
--version Display the version of this tool.
--debug Turn on debugging.


euca-describe-snapshots

Shows information about snapshots.

euca-describe-snapshots [-h, --help] [--version] [--debug] [snapshot1 snapshot2...snapshotN]

OPTIONAL PARAMETERS

snapshot1 snapshot2...snapshotN - snapshots to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Network Management

euca-allocate-address

Allocate a public IP address.

euca-allocate-address [-h, --help] [--version] [--debug]

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-associate-address

Associate an instance with a public IP address.

euca-associate-address -i, --instance instance_id [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

-i, --instance unique identifier for a running instance to associate the address with.

ip IP address to associate.

OPTIONAL PARAMETERS

-a, --access-key user's Access Key ID.

-s, --secret-key user's Secret Key.

-U, --url URL of the Cloud to connect to.

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-addresses

Shows information about addresses.

euca-describe-addresses [-h, --help] [--version] [--debug] [ip1 ip2...ipN]

OPTIONAL PARAMETERS

ip1 ip2...ipN IP addresses to display information about.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-disassociate-address

Disassociate a public IP address from an instance.

euca-disassociate-address [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

ip IP address to disassociate.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-release-address

Releases a public IP address.

euca-release-address [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

ip The public IP address to release.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Security

euca-add-group

Creates a new security group.

euca-add-group -d, --description group_description [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

-d, --description Description for the group to be created.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-group

Deletes a security group.

euca-delete-group [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETER

group_name unique name for a group to delete.

OPTIONAL PARAMETER

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-groups

Shows information about groups.

euca-describe-groups [-h, --help] [--version] [--debug] [group1 group2...groupN]

OPTIONAL PARAMETERS

group1 group2...groupN groups to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-add-keypair

Creates a new key pair for use with instances.

euca-add-keypair [-h, --help] [--version] [--debug] keypair_name

REQUIRED PARAMETERS

keypair_name - unique name for a keypair to create.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-keypair

Delete a key pair.

euca-delete-keypair [-h, --help] [--version] [--debug] keypair_name

REQUIRED PARAMETERS

keypair_name unique name for the keypair to delete.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-keypairs

Shows information about keypairs.

euca-describe-keypairs [-h, --help] [--version] [--debug] [keypair1 keypair2...keypairN]

OPTIONAL PARAMETERS

keypair1 keypair2...keypairN keypairs to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-availability-zones

Shows information about availability zones.

euca-describe-availability-zones [--region region] [-h, --help] [--version] [--debug] [zone1 zone2...zoneN] [verbose]

OPTIONAL PARAMETERS

--region region to describe availability zones for

zone1 zone2...zoneN zones to describe.

verbose show verbose resource information (Eucalyptus administrator-only functionality).

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-regions

Shows information about regions.

euca-describe-regions [-h, --help] [--version] [--debug] [region1 region2...regionN]

OPTIONAL PARAMETERS

region1 region2...regionN regions to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-get-console-output

Prints console output from a running instance.

euca-get-console-output [-h, --help] [--version] [--debug] instance_id

REQUIRED PARAMETERS

instance_id unique identifier for the instance show the console output for.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-modify-image-attribute

Modify attributes for an image.

euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code] [-a, --add entity ] [-r, --remove entity] [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETERS

image_id Unique identifier for the image that you want to modify the attributes for.

OPTIONAL PARAMETERS

-l, --launch-permission Show launch permissions.

-p, --product-code Show the product codes associated with the image

-a, -add Entity (typically, user id) to add.

-r, --remove Entity (typically, user id) to remove.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-reset-image-attribute

Reset attributes for an image.

euca-reset-image-attribute -l, --launch-permission [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETERS

-l, --launch-permission show launch permissions.

image_id - unique identifier for the image that you want to reset the attributes for.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-revoke

Revoke a rule for a security group.

euca-revoke [-P | --protocol protocol] [-p | --port-range port_range] [-t | --icmp-type-code type:code] [-o | --source-group source_group] [-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

group_name Name of the group to add the rule to.

OPTIONAL PARAMETERS

-P, --protocol Protocol ("tcp" "udp" or "icmp").

-p, --port-range Range of ports for the rule (specified as "from-to").

-t, --icmp-type-code ICMP type and code specified as "type:code"

-o, --source-group Group from which traffic is authorized by the rule.

-u, --source-group-user User ID for the source group.

-s, --source-subnet The source subnet for the rule.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-version

Shows the Euca2ools version

euca-version [-h, --help] [--debug]


euca-authorize

Add a new rule to a security group.

euca-authorize [-P, --protocol protocol] [-p, --port-range port_range] [-t, --icmp-type-code type:code] [-o, --source-group source_group] [-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

group_name Name of the group to add the rule to.

OPTIONAL PARAMETERS

-P, --protocol Protocol ("tcp" "udp" or "icmp").

-p, --port-range Range of ports for the rule (specified as "from-to").

-t, --icmp-type-code ICMP type and code specified as "type:code"

-o, --source-group Group from which traffic is authorized by the rule.

-u, --source-group-user User ID for the source group.

-s, --source-subnet The source subnet for the rule.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.

Commands Available in UEC and not available in Eucalyptus installations


Uec-publish-tarball

Usage: uec-publish-tarball [ options ] tarfile bucket [arch]

register a UEC tarball (ie, per http://uec-images.ubuntu.com)

if arch is not provided, a name-based attempt is made to guess options:

-k | --kernel k use previously registered kernel with id 'k'

specify 'none' for no kernel

-K | --kernel-file f bundle, upload, use file 'f' as kernel

-r | --ramdisk r use previously registered ramdisk with id 'r'

specify 'none' for no ramdisk

-R | --ramdisk-file f bundle, upload, use file 'f' as ramdisk --resize s resize the image to 's' bundling uploading

's' must be valid input to uec-resize-image

-q | --quiet be quiet, only output published ids Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386


uec-registration

uec-registration [--manual|--auto|--help]
 
Options:
--manual      Disable automatic component registration
	 
--auto        Enable automatic component registration
	 
-h, --help    This message


uec-run-instances

Same as euca-run-instances


uec-publish-image

Usage: uec-publish-image [ options ] arch image bucket
	 
arch           : one of i386 or x86_64

image          : the image to upload and register
	 
bucket         : bucket to publish image to
options:
	 
l|-add-launch <user_id>   : user_id can be "all", or "none"
	 
--dry-run                : only report what would be done
	 
--allow-existing         : if a image is already registered
	 
simply report as if work was done
	 
o|-output <file>          : write registered id and manifest to file
|--rename <publish_path>  : publish to bucket/<publish_path>
	 
default: bucket/<basename(image)>
	 
t|-type   <type>          : type is one of kernel/ramdisk/image
	 
v|-verbose                : increase verbosity

if type is 'image', then:
-k | --kernel  k        : use previously registered kernel with id 'k' specify 'none' for no kernel

-K | --kernel-file f    : bundle, upload, use file 'f' as kernel
	 
-r | --ramdisk r        : use previously registered ramdisk with id 'r' specify 'none' for no ramdisk
	 
-R | --ramdisk-file f   : bundle, upload, use file 'f' as ramdisk
	 
-B | --block-device-mapping m : specify block device mapping in bundle


uec-query-builds

Usage: uec-query-builds [options]
Options:
-h, --help show this help message and exit
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
--build-name=BUILD_NAME
build name ('server', 'desktop' ..)
--stream=STREAM stream query ('released', 'daily')
--base-url=BASE_URL the base url to query
--output=FILE write output to file, default is stdout
--serial=SERIAL build serial serial to use (YYYYMMDD)
--system-suite use output of 'lsb_release --codename --short' for suite
--config=CONFIG yaml config file to read
--region=REGION the ec2 region to query
--img-type=TYPE the ec2 image type (one of: ebs, instance)
--arch=ARCH the architecture. (one of: i386, amd64)

uec-resize-image

Usage: uec-query-builds [options]
Options:
-h, --help show this help message and exit
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
--build-name=BUILD_NAME
build name ('server', 'desktop' ..)
--stream=STREAM stream query ('released', 'daily')
--base-url=BASE_URL the base url to query
--output=FILE write output to file, default is stdout
--serial=SERIAL build serial serial to use (YYYYMMDD)
--system-suite use output of 'lsb_release --codename --short' for suite
--config=CONFIG yaml config file to read
--region=REGION the ec2 region to query
--img-type=TYPE the ec2 image type (one of: ebs, instance)
--arch=ARCH the architecture. (one of: i386, amd64)
uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help
Usage: uec-resize-image [ options ] image size [output]
Resize a UEC image to a new size.
if output is given, do not modify 'image', but create new file 'output'
New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte
options:
 -v | --verbose    show command output

Referensi


Pranala Menarik