Difference between revisions of "UEC: Peritah-perintah Euca"

From OnnoWiki
Jump to navigation Jump to search
Line 1,138: Line 1,138:
 
Prints console output from a running instance.
 
Prints console output from a running instance.
  
01 euca-get-console-output [-h, --help] [--version] [--debug] instance_id
+
euca-get-console-output [-h, --help] [--version] [--debug] instance_id
02
+
03 REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
04
+
05 instance_id unique identifier for the instance show the console output for.
+
instance_id unique identifier for the instance show the console output for.
06
+
07 OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
08
+
09 -a, --access-key User's Access Key ID.
+
-a, --access-key User's Access Key ID.
10
+
11 -s, --secret-key User's Secret Key.
+
-s, --secret-key User's Secret Key.
12
+
13 -U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
14
+
15 --config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
16 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
17
+
18 -h, --help Display this help message.
+
-h, --help Display this help message.
19
+
20 --version Display the version of this tool.
+
--version Display the version of this tool.
21
+
22 --debug Turn on debugging.
+
--debug Turn on debugging.
  
  
Line 1,166: Line 1,166:
 
Modify attributes for an image.
 
Modify attributes for an image.
  
01 euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code]
+
euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code]
02 [-a, --add entity ] [-r, --remove entity]
+
[-a, --add entity ] [-r, --remove entity]
03 [-h, --help] [--version] [--debug] image_id
+
[-h, --help] [--version] [--debug] image_id
04
+
05 REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
06
+
07 image_id Unique identifier for the image that you want to modify the attributes for.
+
image_id Unique identifier for the image that you want to modify the attributes for.
08
+
09 OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
10
+
11 -l, --launch-permission Show launch permissions.
+
-l, --launch-permission Show launch permissions.
12
+
13 -p, --product-code Show the product codes associated with the image
+
-p, --product-code Show the product codes associated with the image
14
+
15 -a, -add Entity (typically, user id) to add.
+
-a, -add Entity (typically, user id) to add.
16
+
17 -r, --remove Entity (typically, user id) to remove.
+
-r, --remove Entity (typically, user id) to remove.
18
+
19 -A, --access-key User's Access Key ID.
+
-A, --access-key User's Access Key ID.
20
+
21 -S, --secret-key User's Secret Key.
+
-S, --secret-key User's Secret Key.
22
+
23 -U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
24
+
25 --config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
26 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
27
+
28 -h, --help Display this help message.
+
-h, --help Display this help message.
29
+
30 --version Display the version of this tool.
+
--version Display the version of this tool.
31
+
32 --debug Turn on debugging.
+
--debug Turn on debugging.
  
  
Line 1,204: Line 1,204:
 
Reset attributes for an image.
 
Reset attributes for an image.
  
01 euca-reset-image-attribute -l, --launch-permission
+
euca-reset-image-attribute -l, --launch-permission
02 [-h, --help] [--version] [--debug] image_id
+
[-h, --help] [--version] [--debug] image_id
03
+
04 REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
05
+
06 -l, --launch-permission show launch permissions.
+
-l, --launch-permission show launch permissions.
07
+
08 image_id - unique identifier for the image that you want to reset the attributes for.
+
image_id - unique identifier for the image that you want to reset the attributes for.
09
+
10 OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
11
+
12 -a, --access-key User's Access Key ID.
+
-a, --access-key User's Access Key ID.
13
+
14 -s, --secret-key User's Secret Key.
+
-s, --secret-key User's Secret Key.
15
+
16 -U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
17
+
18 --config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
19 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
20
+
21 -h, --help Display this help message.
+
-h, --help Display this help message.
22
+
23 --version Display the version of this tool.
+
--version Display the version of this tool.
24
+
25 --debug Turn on debugging.
+
--debug Turn on debugging.
  
  
Line 1,235: Line 1,235:
 
Revoke a rule for a security group.
 
Revoke a rule for a security group.
  
01 euca-revoke [-P | --protocol protocol] [-p | --port-range port_range]
+
euca-revoke [-P | --protocol protocol] [-p | --port-range port_range]
02 [-t | --icmp-type-code type:code] [-o | --source-group source_group]
+
[-t | --icmp-type-code type:code] [-o | --source-group source_group]
03 [-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet]
+
[-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet]
04 [-h, --help] [--version] [--debug] group_name
+
[-h, --help] [--version] [--debug] group_name
05
+
06 REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
07
+
08 group_name Name of the group to add the rule to.
+
group_name Name of the group to add the rule to.
09
+
10 OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
11
+
12 -P, --protocol Protocol ("tcp" "udp" or "icmp").
+
-P, --protocol Protocol ("tcp" "udp" or "icmp").
13
+
14 -p, --port-range Range of ports for the rule (specified as "from-to").
+
-p, --port-range Range of ports for the rule (specified as "from-to").
15
+
16 -t, --icmp-type-code ICMP type and code specified as "type:code"
+
-t, --icmp-type-code ICMP type and code specified as "type:code"
17
+
18 -o, --source-group Group from which traffic is authorized by the rule.
+
-o, --source-group Group from which traffic is authorized by the rule.
19
+
20 -u, --source-group-user User ID for the source group.
+
-u, --source-group-user User ID for the source group.
21
+
22 -s, --source-subnet The source subnet for the rule.
+
-s, --source-subnet The source subnet for the rule.
23
+
24 -A, --access-key User's Access Key ID.
+
-A, --access-key User's Access Key ID.
25
+
26 -S, --secret-key User's Secret Key.
+
-S, --secret-key User's Secret Key.
27
+
28 -U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
29
+
30 --config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
31 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
32
+
33 -h, --help Display this help message.
+
-h, --help Display this help message.
34
+
35 --version Display the version of this tool.
+
--version Display the version of this tool.
36
+
37 --debug Turn on debugging.
+
--debug Turn on debugging.
  
  
Line 1,278: Line 1,278:
 
Shows the Euca2ools version
 
Shows the Euca2ools version
  
1 euca-version [-h, --help] [--debug]
+
euca-version [-h, --help] [--debug]
  
  
Line 1,285: Line 1,285:
 
Add a new rule to a security group.
 
Add a new rule to a security group.
  
01 euca-authorize [-P, --protocol protocol] [-p, --port-range port_range]
+
euca-authorize [-P, --protocol protocol] [-p, --port-range port_range]
02 [-t, --icmp-type-code type:code] [-o, --source-group source_group]
+
[-t, --icmp-type-code type:code] [-o, --source-group source_group]
03 [-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet]
+
[-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet]
04 [-h, --help] [--version] [--debug] group_name
+
[-h, --help] [--version] [--debug] group_name
05
+
06 REQUIRED PARAMETERS
+
REQUIRED PARAMETERS
07
+
08 group_name Name of the group to add the rule to.
+
group_name Name of the group to add the rule to.
09
+
10 OPTIONAL PARAMETERS
+
OPTIONAL PARAMETERS
11
+
12 -P, --protocol Protocol ("tcp" "udp" or "icmp").
+
-P, --protocol Protocol ("tcp" "udp" or "icmp").
13
+
14 -p, --port-range Range of ports for the rule (specified as "from-to").
+
-p, --port-range Range of ports for the rule (specified as "from-to").
15
+
16 -t, --icmp-type-code ICMP type and code specified as "type:code"
+
-t, --icmp-type-code ICMP type and code specified as "type:code"
17
+
18 -o, --source-group Group from which traffic is authorized by the rule.
+
-o, --source-group Group from which traffic is authorized by the rule.
19
+
20 -u, --source-group-user User ID for the source group.
+
-u, --source-group-user User ID for the source group.
21
+
22 -s, --source-subnet The source subnet for the rule.
+
-s, --source-subnet The source subnet for the rule.
23
+
24 -A, --access-key User's Access Key ID.
+
-A, --access-key User's Access Key ID.
25
+
26 -S, --secret-key User's Secret Key.
+
-S, --secret-key User's Secret Key.
27
+
28 -U, --url URL of the Cloud to connect to.
+
-U, --url URL of the Cloud to connect to.
29
+
30 --config Read credentials and cloud settings from the
+
--config Read credentials and cloud settings from the
31 specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
+
specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
32
+
33 -h, --help Display this help message.
+
-h, --help Display this help message.
34
+
35 --version Display the version of this tool.
+
--version Display the version of this tool.
36
+
37 --debug Turn on debugging.
+
--debug Turn on debugging.
38
+
39 Commands Available in UEC and not available in Eucalyptus installations
+
Commands Available in UEC and not available in Eucalyptus installations
  
  
 
===Uec-publish-tarball===
 
===Uec-publish-tarball===
  
01 Usage: uec-publish-tarball [ options ] tarfile bucket [arch]
+
Usage: uec-publish-tarball [ options ] tarfile bucket [arch]
02
+
03 register a UEC tarball (ie, per http://uec-images.ubuntu.com)
+
register a UEC tarball (ie, per http://uec-images.ubuntu.com)
04
+
05 if arch is not provided, a name-based attempt is made to guess
+
if arch is not provided, a name-based attempt is made to guess
06 options:
+
options:
07
+
08 -k | --kernel  k        use previously registered kernel with id 'k'
+
-k | --kernel  k        use previously registered kernel with id 'k'
09
+
10 specify 'none' for no kernel
+
specify 'none' for no kernel
11
+
12 -K | --kernel-file f    bundle, upload, use file 'f' as kernel
+
-K | --kernel-file f    bundle, upload, use file 'f' as kernel
13
+
14 -r | --ramdisk r        use previously registered ramdisk with id 'r'
+
-r | --ramdisk r        use previously registered ramdisk with id 'r'
15
+
16 specify 'none' for no ramdisk
+
specify 'none' for no ramdisk
17
+
18 -R | --ramdisk-file f  bundle, upload, use file 'f' as ramdisk
+
-R | --ramdisk-file f  bundle, upload, use file 'f' as ramdisk
19 --resize  s        resize the image to 's' bundling uploading
+
--resize  s        resize the image to 's' bundling uploading
20
+
21 's' must be valid input to uec-resize-image
+
's' must be valid input to uec-resize-image
22
+
23 -q | --quiet            be quiet, only output published ids
+
-q | --quiet            be quiet, only output published ids
24 Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386
+
Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386
  
  
 
===uec-registration===
 
===uec-registration===
  
1 uec-registration [--manual|--auto|--help]
+
uec-registration [--manual|--auto|--help]
2  
+
   
3 Options:
+
Options:
4
+
5 --manual      Disable automatic component registration
+
--manual      Disable automatic component registration
6
+
7 --auto        Enable automatic component registration
+
--auto        Enable automatic component registration
8
+
9 -h, --help    This message
+
-h, --help    This message
  
  
 
===uec-run-instances===
 
===uec-run-instances===
  
1 Same as euca-run-instances
+
Same as euca-run-instances
  
  
 
===uec-publish-image===
 
===uec-publish-image===
  
01 Usage: uec-publish-image [ options ] arch image bucket
+
Usage: uec-publish-image [ options ] arch image bucket
02
+
03 arch          : one of i386 or x86_64
+
arch          : one of i386 or x86_64
04
+
05 image          : the image to upload and register
+
image          : the image to upload and register
06
+
07 bucket        : bucket to publish image to
+
bucket        : bucket to publish image to
08 options:
+
options:
09
+
10 l|-add-launch <user_id>  : user_id can be "all", or "none"
+
l|-add-launch <user_id>  : user_id can be "all", or "none"
11
+
12 --dry-run                : only report what would be done
+
--dry-run                : only report what would be done
13
+
14 --allow-existing        : if a image is already registered
+
--allow-existing        : if a image is already registered
15
+
16 simply report as if work was done
+
simply report as if work was done
17
+
18 o|-output <file>          : write registered id and manifest to file
+
o|-output <file>          : write registered id and manifest to file
19 |--rename <publish_path>  : publish to bucket/<publish_path>
+
|--rename <publish_path>  : publish to bucket/<publish_path>
20
+
21 default: bucket/<basename(image)>
+
default: bucket/<basename(image)>
22
+
23 t|-type  <type>          : type is one of kernel/ramdisk/image
+
t|-type  <type>          : type is one of kernel/ramdisk/image
24
+
25 v|-verbose                : increase verbosity
+
v|-verbose                : increase verbosity
26 if type is 'image', then:
+
if type is 'image', then:
27
+
28 -k | --kernel  k        : use previously registered kernel with id 'k'
+
-k | --kernel  k        : use previously registered kernel with id 'k'
29
+
30 specify 'none' for no kernel
+
specify 'none' for no kernel
31
+
32 -K | --kernel-file f    : bundle, upload, use file 'f' as kernel
+
-K | --kernel-file f    : bundle, upload, use file 'f' as kernel
33
+
34 -r | --ramdisk r        : use previously registered ramdisk with id 'r'
+
-r | --ramdisk r        : use previously registered ramdisk with id 'r'
35
+
36 specify 'none' for no ramdisk
+
specify 'none' for no ramdisk
37
+
38 -R | --ramdisk-file f  : bundle, upload, use file 'f' as ramdisk
+
-R | --ramdisk-file f  : bundle, upload, use file 'f' as ramdisk
39
+
40 -B | --block-device-mapping m : specify block device mapping in bundle
+
-B | --block-device-mapping m : specify block device mapping in bundle
  
  
 
===uec-query-builds===
 
===uec-query-builds===
  
01 Usage: uec-query-builds [options]
+
Usage: uec-query-builds [options]
02
+
03 Options:
+
Options:
04 -h, --help show this help message and exit
+
-h, --help show this help message and exit
05 --suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
+
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
06 --build-name=BUILD_NAME
+
--build-name=BUILD_NAME
07 build name ('server', 'desktop' ..)
+
build name ('server', 'desktop' ..)
08 --stream=STREAM stream query ('released', 'daily')
+
--stream=STREAM stream query ('released', 'daily')
09 --base-url=BASE_URL the base url to query
+
--base-url=BASE_URL the base url to query
10 --output=FILE write output to file, default is stdout
+
--output=FILE write output to file, default is stdout
11 --serial=SERIAL build serial serial to use (YYYYMMDD)
+
--serial=SERIAL build serial serial to use (YYYYMMDD)
12 --system-suite use output of 'lsb_release --codename --short' for
+
--system-suite use output of 'lsb_release --codename --short' for
13 suite
+
suite
14 --config=CONFIG yaml config file to read
+
--config=CONFIG yaml config file to read
15 --region=REGION the ec2 region to query
+
--region=REGION the ec2 region to query
16 --img-type=TYPE the ec2 image type (one of: ebs, instance)
+
--img-type=TYPE the ec2 image type (one of: ebs, instance)
17 --arch=ARCH the architecture. (one of: i386, amd64)
+
--arch=ARCH the architecture. (one of: i386, amd64)
  
  
 
===uec-resize-image===
 
===uec-resize-image===
  
01 Usage: uec-query-builds [options]
+
Usage: uec-query-builds [options]
02
+
03 Options:
+
Options:
04 -h, --help show this help message and exit
+
-h, --help show this help message and exit
05 --suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
+
--suite=SUITE suite to query ('hardy', 'karmic', 'lucid')
06 --build-name=BUILD_NAME
+
--build-name=BUILD_NAME
07 build name ('server', 'desktop' ..)
+
build name ('server', 'desktop' ..)
08 --stream=STREAM stream query ('released', 'daily')
+
--stream=STREAM stream query ('released', 'daily')
09 --base-url=BASE_URL the base url to query
+
--base-url=BASE_URL the base url to query
10 --output=FILE write output to file, default is stdout
+
--output=FILE write output to file, default is stdout
11 --serial=SERIAL build serial serial to use (YYYYMMDD)
+
--serial=SERIAL build serial serial to use (YYYYMMDD)
12 --system-suite use output of 'lsb_release --codename --short' for
+
--system-suite use output of 'lsb_release --codename --short' for
13 suite
+
suite
14 --config=CONFIG yaml config file to read
+
--config=CONFIG yaml config file to read
15 --region=REGION the ec2 region to query
+
--region=REGION the ec2 region to query
16 --img-type=TYPE the ec2 image type (one of: ebs, instance)
+
--img-type=TYPE the ec2 image type (one of: ebs, instance)
17 --arch=ARCH the architecture. (one of: i386, amd64)
+
--arch=ARCH the architecture. (one of: i386, amd64)
18 uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help
+
uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help
19 Usage: uec-resize-image [ options ] image size [output]
+
Usage: uec-resize-image [ options ] image size [output]
20 Resize a UEC image to a new size.
+
Resize a UEC image to a new size.
21 if output is given, do not modify 'image', but create new file 'output'
+
if output is given, do not modify 'image', but create new file 'output'
22
+
23 New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte
+
New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte
24 options:
+
options:
25
+
26 -v | --verbose    show command output
+
-v | --verbose    show command output
  
 
==Referensi==
 
==Referensi==

Revision as of 09:21, 22 March 2011

Image Management

euca-bundle-image

Bundles an image for use with Eucalyptus or Amazon EC2.

	euca-bundle-image -i, --image image_path -u, --user user [-c, --cert cert_path]
	[-k, --privatekey private_key_path] [-p, --prefix prefix] [--kernel kernel_id]
	[--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
	[-d, --destination destination_path] [--ec2cert ec2cert_path]
	[-r, --arch target_architecture] [--batch] [-h, --help] [--version] [--debug]
	 
	REQUIRED PARAMETERS
	 
	-i, --image Path to the image file to bundle.
	 
	-u, --user User ID (12-digit) of the user who is bundling the image.
	 
	OPTIONAL PARAMETERS
	 
	-c, --cert Path to the user's PEM encoded certificate.
	 
	-k, --privatekey Path to the user's PEM encoded private key.
	 
	-p, --prefix The prefix for the bundle image files. (default: image name).
	 
	--kernel The kernel to be associated with the bundled image.
	 
	--ramdisk The ramdisk to be associated with the bundled image.
	 
	-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
	 
	-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
	 
	--ec2cert The path to the Cloud's X509 public key certificate.
	 
	-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
	 
	--batch Run in batch mode (compatibility only. has no effect).
	 
	-a, --access-key User's Access Key ID.
	 
	-s, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-bundle-vol

Bundle the local filesystem of a running instance as a bundled image.

	euca-bundle-vol -u, --user user -s, --size size_in_MB
	 
	[-c, --cert cert_path] [-k, --privatekey private_key_path]
	 
	[-a, --all] [-e, --exclude dir1, dir2,...dirN] [-p, --prefix prefix] [--[no-]inherit] [-v, --volume volume_path] [--fstab fstab_path] [--generate-fstab] [--kernel kernel_id] [--ramdisk ramdisk_id] [-B, --block-device-mapping mapping]
	 
	[-d, --destination destination_path] [--ec2cert ec2cert_path] [-r, --arch target_architecture] [--batch] [--version]
	 
	REQUIRED PARAMETERS
	 
	-u, --user User ID (12-digit) of the user who is bundling the image.
	 
	-s, --size Size for the image in MB (default: 10GB or 10240MB).
	 
	OPTIONAL PARAMETERS
	 
	-c, --cert Path to the user's PEM encoded certificate.
	 
	-k, --privatekey Path to the user's PEM encoded private key.
	 
	-a, --all Bundle all directories (including mounted filesystems).
	 
	-p, --prefix The prefix for the bundle image files. (default: image name).
	 
	--[no-]inherit Add (or do not add) instance metadata to the bundled image. Inherit is set by default.
	 
	-e, --exclude comma-separated list of directories to exclude.
	 
	--kernel The kernel to be associated with the bundled image.
	 
	--ramdisk The ramdisk to be associated with the bundled image.
	 
	-B, --block-device-mapping Default block device mapping for the image (comma-separated list of key=value pairs).
	 
	-d, --destination Directory to store the bundled image in (default: "/tmp"). Recommended.
	 
	--ec2cert The path to the Cloud's X509 public key certificate.
	 
	-r, --arch Target architecture for the image ('x86_64' or 'i386' default: 'x86_64').
	 
	-v, --volume Path to mounted volume to create the bundle from (default: "/").
	 
	--fstab Path to the fstab to be bundled into the image.
	 
	--generate-fstab Generate fstab to bundle into the image.
	 
	--batch Run in batch mode (compatibility only. has no effect).


euca-delete-bundle

Delete a previously uploaded bundle.

	euca-delete-bundle -b, --bucket bucket [-m, --manifest manifest_path]
	[-p, --prefix prefix] [--clear] [-h, --help] [--version] [--debug]
	 
	REQUIRED PARAMETERS
	 
	bucket The name of the bucket to delete from.
	 
	OPTIONAL PARAMETERS
	 
	-m, --manifest The path to the manifest file.
	 
	-b, --bucket The bucket to delete the bundle from (if no
	manifest is specified, all images from this
	bucket will be deleted).
	 
	-p, --prefix The filename prefix for bundled files. Defaults
	to image name.
	 
	--clear Delete the bucket containing the image.
	 
	-a, --access-key User's Access Key ID.
	 
	-s, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-download-bundle

Downloads a bundled image from a bucket.

	euca-download-bundle -b, --bucket bucket [-m, --manifest manifest_path] [-d, --directory directory]
	[-h, --help] [--version] [--debug]
	 
	REQUIRED PARAMETERS
	 
	-b, --bucket The name of the bucket to download from.
	 
	OPTIONAL PARAMETERS
	 
	-m, --manifest The path to the manifest file.
	 
	-d, --directory The name of the directory to download the bundled parts to.
	 
	-a, --access-key User's Access Key ID.
	 
	-s, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-unbundle

Unbundles a previously bundled image.

	euca-unbundle-image -m, --manifest manifest_path [-k, --privatekey private_key_path]
	[-s, --source source_directory] [-d, --destination destination_directory]
	[-h, --help] [--version] [--debug]
	 
	REQUIRED PARAMETERS
	 
	-m, --manifest Path to the manifest file for the bundled image.
	 
	OPTIONAL PARAMETERS
	 
	-d, --destination Directory to store the image to (defaults to the current directory).
	 
	-s, --source Source directory for the bundled image parts (defaults to manifest directory).
	 
	-a, --access-key User's Access Key ID.
	 
	-s, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-upload-bundle

Upload a previously bundled image to the cloud.

	euca-upload-bundle -b, --bucket bucket -m, --manifest manifest_path [-a, --access-key access_key_id]

[-s, --secret-key secret_key] [--acl canned_acl] [--ec2cert ec2cert_path] [-d, --directory bundle_path]

	[--part part] [--url url] [--skipmanifest] [--debug] [-h, --help] [--version]
	 
	REQUIRED PARAMETERS
	 
	-b, --bucket The name of the bucket to upload to. Bucket will be created if it does not exist.
	 
	-m, --manifest The path to the manifest file for the bundled image.
	 
	OPTIONAL PARAMETERS
	 
	--acl Canned access control policy (defaults to "aws-exec-read").
	 
	--ec2cert The path to the Cloud's X509 public key certificate.
	 
	-d, --directory The directory containing the bundled image to upload (defaults to the manifest directory).
	 
	--part Uploads specified part and all subsequent parts.
	 
	--skipmanifest Do not upload the manifest file.
	 
	-a, --access-key User's Access Key ID.
	 
	-s, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-describe-images

Shows information about machine images.

	euca-describe-images [-a] [-o owner] [-x user] [-h, --help] [--version] [--debug] [image1 image2 ... imageN]
	 
	OPTIONAL PARAMETERS
	 
	image1 image2 ... imageN Images to describe.
	 
	-a Show all images that the user has access to.
	 
	-o Show only images owned by the owner specified are displayed.
	 
	-x Show only images that the specified user is permitted to launch.
	 
	-A, --access-key User's Access Key ID.
	 
	-S, --secret-key User's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	--config Read credentials and cloud settings from the
	specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-describe-image-attribute

Show image attributes.

	euca-describe-image-attribute [-l, --launch-permission] [-p, --product-code]
	[-B, --block-device-mapping] [--kernel] [--ramdisk]
	[-h, --help] [--version] [--debug] image_id
	 
	REQUIRED PARAMETERS
	 
	image_id unique identifier for the image that you want to retrieve the attributes for.
	 
	OPTIONAL PARAMETERS
	 
	-B, --block-device-mapping show block device mapping.
	-l, --launch-permission show launch permissions.
	-p, --product-code show the product codes associated with the image
	--kernel show the kernel id associated with the image.
	--ramdisk show the ramdisk id associated with the image.
	 
	-a, --access-key user's Access Key ID.
	 
	-s, --secret-key user's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.

euca-register

Registers a manifest for use with the cloud.

	euca-register [-h, --help] [--version] [--debug] image_location
	 
	REQUIRED PARAMETERS
	 
	image_location - path to the uploaded image (bucket/manifest).
	 
	OPTIONAL PARAMETERS
	 
	-a, --access-key user's Access Key ID.
	 
	-s, --secret-key user's Secret Key.
	 
	-U, --url URL of the Cloud to connect to.
	 
	-h, --help Display this help message.
	 
	--version Display the version of this tool.
	 
	--debug Turn on debugging.


euca-deregister

Deregisters an image from the cloud.

euca-deregister [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETER

image_id unique identifier for the image to be deregistered.

OPTIONAL PARAMETER

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Instance Management

euca-describe-instances

Shows information about instances.

euca-describe-instances [-h, --help] [--version] [--debug] [instance1... instanceN]

OPTIONAL PARAMETERS

instance1... instanceN instances to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-reboot-instances

Reboots specified instances.

euca-reboot-instances [-h, --help] [--version] [--debug] [instance1... instanceN]

OPTIONAL PARAMETERS

instance1... instanceN instances to reboot.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-run-instances

Starts instances.

euca-run-instances [-n, --instance-count count] [-g, --group group_name] [-k, --key keyname] [--addressing addressing] [-t, --instance-type instance_type] [-z, --availability-zone zone] [--kernel kernel_id] [--ramdisk ramdisk_id] [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETERS

image_id identifier for the image to run.

OPTIONAL PARAMETERS

-n, --instance-count Number of instances to run.

-g, --group Security group to run the instance under.

-k, --key Name of a (previously created) keypair to associate with this reservation.

-d, --user-data User data for instances read from the command line.

-f, --user-data-file User data for instances as a filename.

--addressing Addressing mode (e.g., private).

-t, --instance-type VM Image type to run the instance(s) as (default: m1.small).

-z, --availability-zone Availability zone to run the instance(s) in.

--kernel Id of the kernel to be used to launch instance(s).

--ramdisk Id of the ramdisk to be used to launch instance(s).

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-terminate-instances

Stops specified instances.

euca-terminate-instances [-h, --help] [--version] [--debug] [instance1... instanceN]

REQUIRED PARAMETERS

instance1... instanceN instances to terminate.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-confirm-product-instance

Confirm if instance is running with product code attached.

euca-confirm-product-instance i, --instance instance_id [-h, --help] [-version] [--debug] product_code

REQUIRED PARAMETERS

-i, --instance Unique identifier for a running instance.

product_code The product code to verify.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Storage Management

euca-attach-volume

Attaches a volume to an instance.

euca-attach-volume -i, --instance instance_id -d, --device device [-h, --help] [--version] [--debug] volume_id

REQUIRED PARAMETERS

-i, --instance unique id of a running instance to attach the volume to.

-d, --device local device name (inside the guest VM) to use.

volume_id unique id for a volume to attach.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-create-volume

Creates a volume in a specified availability zone.

euca-create-volume -S, --size size | --snapshot snapshot_id -z zone [-h, --help] [--version] [--debug]

REQUIRED PARAMETERS

-s, --size size of the volume (in GiB).

--snapshot snapshot id to create the volume from. Either size or snapshot can be specified (not both).

-z, --zone availability zone to create the volume in

OPTIONAL PARAMETERS

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-volume

Deletes a volume.

euca-delete-volume [-h, --help] [--version] [--debug] volume_id

REQUIRED PARAMETERS

volume_id unique identifier for the volume to be deleted.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-volumes

Shows information about volumes.

euca-describe-volumes [-h, --help] [--version] [--debug] [volume1 volume2...volumeN]

OPTIONAL PARAMETERS

volume1 volume2...volumeN volumes to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-detach-volume

Detaches a volume from an instance.

euca-detach-volume [-h, --help] [--version] [--debug] volume_id

REQUIRED PARAMETERS

volume_id unique id for a volume to detach.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-create-snapshot

Creates a snapshot from an existing volume.

euca-create-snapshot [-h, --help] [--version] [--debug] volume_id

REQUIRED PARAMETERS

volume_id unique id for a volume to snapshot.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-snapshot

Deletes a snapshot.

euca-delete-snapshot [-h, --help] [--version] [--debug] snapshot_id

REQUIRED PARAMETERS

snapshot_id unique identifier for the snapshot to be deleted.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-snapshots

Shows information about snapshots.

euca-describe-snapshots [-h, --help] [--version] [--debug] [snapshot1 snapshot2...snapshotN]

OPTIONAL PARAMETERS

snapshot1 snapshot2...snapshotN - snapshots to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Network Management

euca-allocate-address

Allocate a public IP address.

euca-allocate-address [-h, --help] [--version] [--debug]

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-associate-address

Associate an instance with a public IP address.

euca-associate-address -i, --instance instance_id [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

-i, --instance unique identifier for a running instance to associate the address with.

ip IP address to associate.

OPTIONAL PARAMETERS

-a, --access-key user's Access Key ID.

-s, --secret-key user's Secret Key.

-U, --url URL of the Cloud to connect to.

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-addresses

Shows information about addresses.

euca-describe-addresses [-h, --help] [--version] [--debug] [ip1 ip2...ipN]

OPTIONAL PARAMETERS

ip1 ip2...ipN IP addresses to display information about.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-disassociate-address

Disassociate a public IP address from an instance.

euca-disassociate-address [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

ip IP address to disassociate.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-release-address

Releases a public IP address.

euca-release-address [-h, --help] [--version] [--debug] ip

REQUIRED PARAMETERS

ip The public IP address to release.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


Security

euca-add-group

Creates a new security group.

euca-add-group -d, --description group_description [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

-d, --description Description for the group to be created.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-group

Deletes a security group.

euca-delete-group [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETER

group_name unique name for a group to delete.

OPTIONAL PARAMETER

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-groups

Shows information about groups.

euca-describe-groups [-h, --help] [--version] [--debug] [group1 group2...groupN]

OPTIONAL PARAMETERS

group1 group2...groupN groups to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-add-keypair

Creates a new key pair for use with instances.

euca-add-keypair [-h, --help] [--version] [--debug] keypair_name

REQUIRED PARAMETERS

keypair_name - unique name for a keypair to create.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-delete-keypair

Delete a key pair.

euca-delete-keypair [-h, --help] [--version] [--debug] keypair_name

REQUIRED PARAMETERS

keypair_name unique name for the keypair to delete.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-keypairs

Shows information about keypairs.

euca-describe-keypairs [-h, --help] [--version] [--debug] [keypair1 keypair2...keypairN]

OPTIONAL PARAMETERS

keypair1 keypair2...keypairN keypairs to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-availability-zones

Shows information about availability zones.

euca-describe-availability-zones [--region region] [-h, --help] [--version] [--debug] [zone1 zone2...zoneN] [verbose]

OPTIONAL PARAMETERS

--region region to describe availability zones for

zone1 zone2...zoneN zones to describe.

verbose show verbose resource information (Eucalyptus administrator-only functionality).

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-describe-regions

Shows information about regions.

euca-describe-regions [-h, --help] [--version] [--debug] [region1 region2...regionN]

OPTIONAL PARAMETERS

region1 region2...regionN regions to describe.

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-get-console-output

Prints console output from a running instance.

euca-get-console-output [-h, --help] [--version] [--debug] instance_id

REQUIRED PARAMETERS

instance_id unique identifier for the instance show the console output for.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-modify-image-attribute

Modify attributes for an image.

euca-modify-image-attribute [-l, --launch-permission] [-p, --product-code] [-a, --add entity ] [-r, --remove entity] [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETERS

image_id Unique identifier for the image that you want to modify the attributes for.

OPTIONAL PARAMETERS

-l, --launch-permission Show launch permissions.

-p, --product-code Show the product codes associated with the image

-a, -add Entity (typically, user id) to add.

-r, --remove Entity (typically, user id) to remove.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-reset-image-attribute

Reset attributes for an image.

euca-reset-image-attribute -l, --launch-permission [-h, --help] [--version] [--debug] image_id

REQUIRED PARAMETERS

-l, --launch-permission show launch permissions.

image_id - unique identifier for the image that you want to reset the attributes for.

OPTIONAL PARAMETERS

-a, --access-key User's Access Key ID.

-s, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-revoke

Revoke a rule for a security group.

euca-revoke [-P | --protocol protocol] [-p | --port-range port_range] [-t | --icmp-type-code type:code] [-o | --source-group source_group] [-u | --source-group-user source_group_user] [-s | --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

group_name Name of the group to add the rule to.

OPTIONAL PARAMETERS

-P, --protocol Protocol ("tcp" "udp" or "icmp").

-p, --port-range Range of ports for the rule (specified as "from-to").

-t, --icmp-type-code ICMP type and code specified as "type:code"

-o, --source-group Group from which traffic is authorized by the rule.

-u, --source-group-user User ID for the source group.

-s, --source-subnet The source subnet for the rule.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.


euca-version

Shows the Euca2ools version

euca-version [-h, --help] [--debug]


euca-authorize

Add a new rule to a security group.

euca-authorize [-P, --protocol protocol] [-p, --port-range port_range] [-t, --icmp-type-code type:code] [-o, --source-group source_group] [-u, --source-group-user source_group_user] [-s, --source-subnet source_subnet] [-h, --help] [--version] [--debug] group_name

REQUIRED PARAMETERS

group_name Name of the group to add the rule to.

OPTIONAL PARAMETERS

-P, --protocol Protocol ("tcp" "udp" or "icmp").

-p, --port-range Range of ports for the rule (specified as "from-to").

-t, --icmp-type-code ICMP type and code specified as "type:code"

-o, --source-group Group from which traffic is authorized by the rule.

-u, --source-group-user User ID for the source group.

-s, --source-subnet The source subnet for the rule.

-A, --access-key User's Access Key ID.

-S, --secret-key User's Secret Key.

-U, --url URL of the Cloud to connect to.

--config Read credentials and cloud settings from the specified config file (defaults to $HOME/.eucarc or /etc/euca2ools/eucarc).

-h, --help Display this help message.

--version Display the version of this tool.

--debug Turn on debugging.

Commands Available in UEC and not available in Eucalyptus installations


Uec-publish-tarball

Usage: uec-publish-tarball [ options ] tarfile bucket [arch]

register a UEC tarball (ie, per http://uec-images.ubuntu.com)

if arch is not provided, a name-based attempt is made to guess options:

-k | --kernel k use previously registered kernel with id 'k'

specify 'none' for no kernel

-K | --kernel-file f bundle, upload, use file 'f' as kernel

-r | --ramdisk r use previously registered ramdisk with id 'r'

specify 'none' for no ramdisk

-R | --ramdisk-file f bundle, upload, use file 'f' as ramdisk --resize s resize the image to 's' bundling uploading

's' must be valid input to uec-resize-image

-q | --quiet be quiet, only output published ids Example: uec-publish-tarball lucid-uec-i386.tar.gz my-lucid-bucket i386


uec-registration

uec-registration [--manual|--auto|--help]

Options:

--manual Disable automatic component registration

--auto Enable automatic component registration

-h, --help This message


uec-run-instances

Same as euca-run-instances


uec-publish-image

Usage: uec-publish-image [ options ] arch image bucket

arch : one of i386 or x86_64

image : the image to upload and register

bucket : bucket to publish image to options:

l|-add-launch <user_id> : user_id can be "all", or "none"

--dry-run : only report what would be done

--allow-existing : if a image is already registered

simply report as if work was done

o|-output <file> : write registered id and manifest to file |--rename <publish_path> : publish to bucket/<publish_path>

default: bucket/<basename(image)>

t|-type <type> : type is one of kernel/ramdisk/image

v|-verbose : increase verbosity if type is 'image', then:

-k | --kernel k : use previously registered kernel with id 'k'

specify 'none' for no kernel

-K | --kernel-file f : bundle, upload, use file 'f' as kernel

-r | --ramdisk r : use previously registered ramdisk with id 'r'

specify 'none' for no ramdisk

-R | --ramdisk-file f : bundle, upload, use file 'f' as ramdisk

-B | --block-device-mapping m : specify block device mapping in bundle


uec-query-builds

Usage: uec-query-builds [options]

Options: -h, --help show this help message and exit --suite=SUITE suite to query ('hardy', 'karmic', 'lucid') --build-name=BUILD_NAME build name ('server', 'desktop' ..) --stream=STREAM stream query ('released', 'daily') --base-url=BASE_URL the base url to query --output=FILE write output to file, default is stdout --serial=SERIAL build serial serial to use (YYYYMMDD) --system-suite use output of 'lsb_release --codename --short' for suite --config=CONFIG yaml config file to read --region=REGION the ec2 region to query --img-type=TYPE the ec2 image type (one of: ebs, instance) --arch=ARCH the architecture. (one of: i386, amd64)


uec-resize-image

Usage: uec-query-builds [options]

Options: -h, --help show this help message and exit --suite=SUITE suite to query ('hardy', 'karmic', 'lucid') --build-name=BUILD_NAME build name ('server', 'desktop' ..) --stream=STREAM stream query ('released', 'daily') --base-url=BASE_URL the base url to query --output=FILE write output to file, default is stdout --serial=SERIAL build serial serial to use (YYYYMMDD) --system-suite use output of 'lsb_release --codename --short' for suite --config=CONFIG yaml config file to read --region=REGION the ec2 region to query --img-type=TYPE the ec2 image type (one of: ebs, instance) --arch=ARCH the architecture. (one of: i386, amd64) uecadmin@ubuntuclustercontroller:~$ uec-resize-image --help Usage: uec-resize-image [ options ] image size [output] Resize a UEC image to a new size. if output is given, do not modify 'image', but create new file 'output'

New size is specified per resize2fs(8), e.g. "1G" for 1 gigabyte options:

-v | --verbose show command output

Referensi


Pranala Menarik