VoIP Cookbook: Briker's H323 Trunk

From OnnoWiki
Jump to navigation Jump to search

Go to the Trunks menu in IPPBX Administration menu.

There is no option specifically for H.323. So you have to choose Custom Trunk

Then choose Add Custom Trunk.

The general settings of Add Custom Trunk

For customized Trunk, fill in the Custom Dial String by using the format H323/<h323-gateway-address>/$OUTNUM$. As shown in Figure 5.23, the gateway address of H323 is 119.18.159.20. Then click Submit Changes.

Open a terminal console, then edit the /etc/asterisk/h323.conf file:

# mcedit /etc/asterisk/h323.conf

Edit the following options available in the /etc/asterisk/h323.conf file:

Port = 1720
bindaddr = <IP Briker address>

Then restart asterisk, by executing the following command:

# /etc/init.d/amportal restart

See Also