Quagga: BGP Dua Link main backup - dengan set community
Jump to navigation
Jump to search
CATATAN: harus di oprek lagi, belum bener propagasi weight-nya
Ada tiga (3) ISP
ISP1:
IP 192.168.1.1/24 menuju ISP3 IP 192.168.3.1/24 menuju ISP2 AS 10 IP 10.100.100.0/24 IP 10.100.200.0/24
ISP2
IP 192.168.2.1/24 - menuju ISP3 IP 192.168.3.2/24 - menuju ISP1 AS 20 IP 10.10.10.0/24 IP 10.10.20.0/24
ISP3 (kita)
IP 192.168.1.2/24 - menuju ISP1 IP 192.168.2.2/24 - menuju ISP2 AS 30 IP 10.1.1.0/24 IP 10.1.2.0/24
Sambungan Fisik
ISP1
ISP1 Eth0 -> ISP3 Eth0 ISP1 Eth1 -> ISP2 Eth1 ISP2 Eth0 -> ISP3 Eth1 ISP1 Eth2 10.100.100.1/24 ISP1 Eth3 10.100.200.1/24 ISP2 Eth2 10.10.10.1/24 ISP2 Eth3 10.10.20.1/24 ISP3 Eth2 10.1.1.1/24 ISP3 Eth3 10.1.2.1/24
Setup connection
ISP1
enable configure terminal interface eth0 ip address 192.168.1.1/24 no shutdown exit interface eth1 ip address 192.168.3.1/24 no shutdown exit interface eth2 ip address 10.100.100.1/24 no shutdown exit interface eth3 ip address 10.100.200.1/24 no shutdown exit end
ISP2
enable configure terminal interface eth0 ip address 192.168.2.1/24 no shutdown exit interface eth1 ip address 192.168.3.2/24 no shutdown exit interface eth2 ip address 10.10.10.1/24 no shutdown exit interface eth3 ip address 10.10.20.1/24 no shutdown exit end
ISP3
enable configure terminal interface eth0 ip address 192.168.1.2/24 no shutdown exit interface eth1 ip address 192.168.2.2/24 no shutdown exit interface eth2 ip address 10.1.1.1/24 no shutdown exit interface eth3 ip address 10.1.2.1/24 no shutdown exit end
BGP Peering
Consider that IP connectivity between ISPs edge routers and Our Core router is already set up and working properly. So we can start to establish BGP peering to both ISPs.
ISP1:
enable configure terminal router bgp 10 bgp router-id 192.168.1.1 network 10.100.100.0/24 network 10.100.200.0/24 neighbor 192.168.3.2 remote-as 20 neighbor 192.168.1.2 remote-as 30 end
ISP2:
enable configure terminal router bgp 20 bgp router-id 192.168.2.1 network 10.10.10.0/24 network 10.10.20.0/24 neighbor 192.168.3.1 remote-as 10 neighbor 192.168.2.2 remote-as 30 end
Main / Backup Link Setup di ISP3
Lakukan
- accept network kita sendiri
- drop semua tabel IP lainnya, karena kita tidak mau menjadi transit provider
- BGP AS prepend - menaikan AS path ke salah satu ISP (disini ISP1)
ISP3:
! AS kita 30, set preference yang berbeda untuk masing2 uplink ! ! 200: set local preference to 200 (via AS 20) ! 500: set local preference to 500 (via AS 10) ! configure terminal ip bgp-community new-format router bgp 30 neighbor 192.168.2.1 remote-as 20 neighbor 192.168.2.1 next-hop-self neighbor 192.168.2.1 send-community neighbor 192.168.1.1 remote-as 10 neighbor 192.168.1.1 next-hop-self neighbor 192.168.1.1 send-community end ! configure terminal route-map LOCAL_PREF_200 permit 10 set community 20:200 route-map LOCAL_PREF_500 permit 10 set community 10:500 end ! configure terminal ! tambahkan route map ke masing-masing neighbor ! router bgp 30 neighbor 192.168.2.1 route-map LOCAL_PREF_200 out neighbor 192.168.1.1 route-map LOCAL_PREF_500 out end configure terminal ! advertise network di belakang router ! router bgp 30 network 10.1.1.0/24 network 10.1.2.0/24 end
Cek
! perhatikan AS 30 di tambahkan 5x ke routing ke arah AS 10 ! clear ip bgp 10 clear ip bgp 20 ! show ip bgp
show ip route show ip bgp 10.100.1000.0/24 show ip bgp neighbors 192.168.2.2 advertised-routes show ip bgp neighbor 192.168.1.1 routes show bgp ipv4 unicast neighbors show bgp ipv4 unicast summary
Referensi
- http://evilrouters.net/2009/03/18/using-bgp-communities-to-influence-routing/
- http://evilrouters.net/2009/03/20/allowing-customers-to-manipulate-routing-using-bgp-communities/
- https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-16/irg-xe-16-book/configuring-a-basic-bgp-network.html
- https://wiki.mikrotik.com/wiki/Manual:Simple_BGP_Multihoming