Konfigurasi ENUM di Asterisk

From OnnoWiki
Jump to navigation Jump to search

Di ambil dari alamat http://www.asterisk.org/doxygen/1.2/AstENUM.html#enumreadme

README.enum

2005-09-06 jtodd@loligo.com

The ENUMLOOKUP function is more complex than it first may appear, and this guide is to give a general overview and set of examples that may be well-suited for the advanced user to evaluate in their consideration of ENUM or ENUM-like lookup strategies. This document assumes a familiarity with ENUM (RFC3761) or ENUM-like methods, as well as familiarity with NAPTR DNS records (RFC2915, RFC3401-3404). For an overview of NAPTR records, and the use of NAPTRs in the ENUM global phone-number-to-DNS mapping scheme, please see http://www.voip-info.org/tiki-index.php?page=ENUM for more detail.

Using ENUM within Asterisk can be simple or complex, depending on how many failover methods and redundancy procedures you wish to utilize. Implementation of ENUM paths is supposedly defined by the person creating the NAPTR records, but the local administrator may choose to ignore certain NAPTR response methods (URI types) or prefer some over others, which is in contradiction to the RFC. The ENUMLOOKUP method simply provides administrators a method for determining NAPTR results in either the globally unique ENUM (e164.arpa) DNS tree, or in other ENUM-like DNS trees which are not globally unique. The methods to actually create channels ("dial") results given by the ENUMLOOKUP function is then up to the administrator to implement in a way that best suits their environment.

Function: ENUMLOOKUP(<number>[,pointer_type[,options[,zone_suffix]]]) 

 Performs an ENUM tree lookup on the specified number, method type,
 and (optionally) ordinal offset, and returns one of four different values:

  1) post-parsed NAPTR of one method (URI) type
  2) count of elements of one method (URI) type
  3) count of all method types
  4) full URI of method at a particular point in the list of all possible methods

Arguments:

number = telephone number or search string. Only numeric values within this string are parsed; all other digits are ignored for search, but are re-written during NAPTR regexp expansion.

service_type = tel, sip, h323, iax2, mailto, ...[any other string], 

    ALL. Default type is "sip".
    Special name of "ALL" will create a list of method types across
    all NAPTR records for the search number, and then put the results
    in an ordinal list starting with 1. The position <number>
    specified will then be returned, starting with 1 as the first
    record (lowest value) in the list.  The service types are not
    hardcoded in Asterisk except for the default (sip) if no other
    service type specified; any method type string (IANA-approved or
    not) may be used except for the string "ALL".

options = optional specifiers. 

   c = count. Returns the number of records of this type are returned
   (regardless of order or priority.)  If "ALL" is the specified
   service_type, then a count of all methods will be returned for the
   DNS record.
   <integer> = The record in priority/order sequence based on the
   total count of records passed back by the query. If a service_type
   is specified, all entries of that type will be sorted into an
   ordinal list starting with 1 (by order first, then priority).
   The default of <options> is "1"

zone_suffix = allows customization of the ENUM zone. Default is e164.arpa.


EXAMPLE USES:

Let's use this ENUM list as an example (note that these examples exist in the DNS, and will hopefully remain in place as example destinations, but they may change or become invalid over time. The end result URIs are not guaranteed to actually work, since some of these hostnames or SIP proxies are imaginary. Of course, the tel: replies go to directory assistance for New York City and San Francisco...) Also note that the complex SIP NAPTR at weight 30 will strip off the leading "+" from the dialed string if it exists. This is probably a better NAPTR than hard-coding the number into the NAPTR, and it is included as a more complex regexp example, though other simpler NAPTRs will work just as well. 


0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 10 100 "u" "E2U+tel" "!^\\+13015611020$!tel:+12125551212!" .
0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 21 100 "u" "E2U+tel" "!^\\+13015611020$!tel:+14155551212!" .
0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 25 100 "u" "E2U+sip" "!^\\+13015611020$!sip:2203@sip.fox-den.com!" .
0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 26 100 "u" "E2U+sip" "!^\\+13015611020$!sip:1234@sip-2.fox-den.com!" .
0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 30 100 "u" "E2U+sip" "!^\\+*([^\\*]*)!sip:\\1@sip-3.fox-den.com!" .
0.2.0.1.1.6.5.1.0.3.1.loligo.com. 3600 IN NAPTR 55 100 "u" "E2U+mailto" "!^\\+13015611020$!mailto:jtodd@fox-den.com!" .

Example 1: Simplest case, using first SIP return (use all defaults except for domain name) 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,,,loligo.com)})
 returns: ${foo}="2203@sip.fox-den.com"

Example 2: What is the first "tel" pointer type for this number? (after sorting by order/preference; default of "1" is assumed in options field) 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,tel,,loligo.com)})
 returns: ${foo}="+12125551212"

Example 3: How many "sip" pointer type entries are there for this number? 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,sip,c,loligo.com)})
 returns: ${foo}=3

Example 4: For all the "tel" pointer type entries, what is the second one in the list? (after sorting by preference) 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,tel,2,loligo.com)})
 returns: ${foo}="+14155551212"

Example 5: How many NAPTRs (tel, sip, mailto, etc.) are in the list for this number? 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,ALL,c,loligo.com)})
 returns: ${foo}=6

Example 6: Give back the second full URI in the sorted list of all NAPTR URIs: 

exten => 100,1,Set(foo=${ENUMLOOKUP(+13015611020,ALL,2,loligo.com)})
 returns: ${foo}="tel:+14155551212"  [note the "tel:" prefix in the string]

Example 7: Look up first SIP entry for the number in the e164.arpa zone (all defaults) 

exten => 100,1,Set(foo=${ENUMLOOKUP(+437203001721)})
 returns: ${foo}="enum-test@sip.nemox.net"  [note: this result is
 subject to change as it is "live" DNS and not under my control]


Example 8: Look up the ISN mapping in freenum.org alpha test zone 

exten => 100,1,Set(foo=${ENUMLOOKUP(1234*256,,,freenum.org)})
 returns: ${foo}="1234@204.91.156.10"  [note: this result is subject
 to change as it is "live" DNS]

Example 9: Give back the first SIP pointer for a number in the enum.yoydynelabs.com zone (invalid lookup) 

exten => 100,1,Set(foo=${ENUMLOOKUP(1234567890,sip,1,enum.yoyodynelabs.com)})
 returns: ${foo}=""


Usage notes and subtle features: 

 a) The use of "+" in lookups is confusing, and warrants further
 explanation.  All E.164 numbers ("global phone numbers") by
 definition need a leading "+" during ENUM lookup.  If you neglect to
 add a leading "+", you may discover that numbers that seem to exist
 in the DNS aren't getting matched by the system or are returned with
 a null string result.  This is due to the NAPTR reply requiring a
 "+" in the regular expression matching sequence.  Older versions of
 Asterisk add a "+" from within the code, which may confuse
 administrators converting to the new function.  Please ensure that
 all ENUM (e164.arpa) lookups contain a leading "+" before lookup, so
 ensure your lookup includes the leading plus sign.  Other DNS trees
 may or may not require a leading "+" - check before using those
 trees, as it is possible the parsed NAPTRs will not provide correct
 results unless you have the correct dialed string.  If you get
 console messages like "WARNING[24907]: enum.c:222 parse_naptr: NAPTR
 Regex match failed." then it is very possible that the returned
 NAPTR expects a leading "+" in the search string (or the returned
 NAPTR is mis-formed.)

 b) If a query is performed of type "c" ("count") and let's say you
 get back 5 records and then some seconds later a query is made
 against record 5 in the list, it may not be the case that the DNS
 resolver has the same answers as it did a second or two ago - maybe
 there are only 4 records in the list in the newest query.  The
 resolver should be the canonical storage location for DNS records,
 since that is the intent of ENUM.  However, some obscure future
 cases may have wildly changing NAPTR records within several seconds.
 This is a corner case, and probably only worth noting as a very rare
 circumstance. (note: I do not object to Asterisk's dnsmgr method of
 locally caching DNS replies, but this method needs to honor the TTL
 given by the remote zone master.  Currently, the ENUMLOOKUP function
 does not use the dnsmgr method of caching local DNS replies.)

 c) If you want strict NAPTR value ordering, then it will be
 necessary to use the "ALL" method to incrementally step through the
 different returned NAPTR pointers.  You will need to use string
 manipulation to strip off the returned method types, since the
 results will look like "sip:12125551212" in the returned value.
 This is a non-trivial task, though it is required in order to have
 strict RFC compliance and to comply with the desires of the remote
 party who is presenting NAPTRs in a particular order for a reason.

 d) Default behavior for the function (even in event of an error) is
 to move to the next priority, and the result is a null value.  Most
 ENUM lookups are going to be failures, and it is the responsibility
 of the dialplan administrator to manage error conditions within
 their dialplan.  This is a change from the old app_enumlookup method
 and it's arbitrary priority jumping based on result type or failure.

 e) Anything other than digits will be ignored in lookup strings.
 Example: a search string of "+4372030blah01721" will turn into
 1.2.7.1.0.0.3.0.2.7.3.4.e164.arpa. for the lookup.  The NAPTR
 parsing may cause unexpected results if there are strings inside
 your NAPTR lookups.

 f) If there exist multiple records with the same weight and order as
 a result of your query, the function will RANDOMLY select a single
 NAPTR from those equal results.

 g) Currently, the function ignores the settings in enum.conf as the
 search zone name is now specified within the function, and the H323
 driver can be chosen by the user via the dialplan.  There were no
 other values in this file, and so it becomes deprecated.

 h) The function will digest and return NAPTRs which use older
 (depricated) style, reversed method strings such as "sip+E2U"
 instead of the more modern "E2U+sip"

 i) There is no provision for multi-part methods at this time.  If
 there are multiple NAPTRs with (as an example) a method of
 "E2U+voice:sip" and then another NAPTR in the same DNS record with a
 method of ""E2U+sip", the system will treat these both as method
 "sip" and they will be separate records from the perspective of the
 function.  Of course, if both records point to the same URI and have
 equal priority/weight (as is often the case) then this will cause no
 serious difficulty, but it bears mentioning.

 j) ISN (ITAD Subscriber Number) usage:  If the search number is of
 the form ABC*DEF (where ABC and DEF are at least one numeric digit)
 then perform an ISN-style lookup where the lookup is manipulated to
 C.B.A.DEF.domain.tld (all other settings and options apply.)  See
 http://www.freenum.org/ for more details on ISN lookups.  In the
 unlikely event you wish to avoid ISN re-writes, put an "n" as the
 first digit of the search string - the "n" will be ignored for the search.


EXAMPLES

All examples below except where noted use "e164.arpa" as the referenced domain, which is the default domain name for ENUMLOOKUP. All numbers are assumed to not have a leading "+" as dialed by the inbound channel, so that character is added where necessary during ENUMLOOKUP function calls. 

; example 1
;
; Assumes North American international dialing (011) prefix.
; Look up the first SIP result and send the call there, otherwise
;  send the call out a PRI.  This is the most simple possible
;  ENUM example, but only uses the first SIP reply in the list of
;  NAPTR(s). 
;
exten => _011.,1,Set(enumresult=${ENUMLOOKUP(+${EXTEN:3})})
exten => _011.,n,Dial(SIP/${enumresult})
exten => _011.,n,Dial(Zap/g1/${EXTEN})
; 
; end example 1

; example 2
;
; Assumes North American international dialing (011) prefix.
; Check to see if there are multiple SIP NAPTRs returned by 
;  the lookup, and dial each in order.  If none work (or none
;  exist) then send the call out a PRI, group 1.
;
exten => _011.,1,Set(sipcount=${ENUMLOOKUP(${EXTEN:3},sip,c)}|counter=0)
exten => _011.,n,While($["${counter}"<"${sipcount}"])
exten => _011.,n,Set(counter=$[${counter}+1])
exten => _011.,n,Dial(SIP/${ENUMLOOKUP(+${EXTEN:3},sip,${counter})})
exten => _011.,n,EndWhile
exten => _011.,n,Dial(Zap/g1/${EXTEN})
;
; end example 2

; example 3
;
; This example expects an ${EXTEN} that is an e.164 number (like
;  14102241145 or 437203001721)
; Search through e164.arpa and then also search through e164.org
;  to see if there are any valid SIP or IAX termination capabilities.
;  If none, send call out via Zap channel 1.
;
; Start first with e164.arpa zone...
;
exten => _X.,1,Set(sipcount=${ENUMLOOKUP(+${EXTEN},sip,c)}|counter=0)
exten => _X.,2,GotoIf($["${counter}"<"${sipcount}"]?3:6)
exten => _X.,3,Set(counter=$[${counter}+1])
exten => _X.,4,Dial(SIP/${ENUMLOOKUP(+${EXTEN},sip,${counter})})
exten => _X.,5,GotoIf($["${counter}"<"${sipcount}"]?3:6)
;
exten => _X.,6,Set(iaxcount=${ENUMLOOKUP(+${EXTEN},iax2,c)}|counter=0)
exten => _X.,7,GotoIf($["${counter}"<"${iaxcount}"]?8:11)
exten => _X.,8,Set(counter=$[${counter}+1])
exten => _X.,9,Dial(IAX2/${ENUMLOOKUP(+${EXTEN},iax2,${counter})})
exten => _X.,10,GotoIf($["${counter}"<"${iaxcount}"]?8:11)
;
exten => _X.,11,NoOp("No valid entries in e164.arpa for ${EXTEN} - checking in e164.org")
;
; ...then also try e164.org, and look for SIP and IAX NAPTRs...
;
exten => _X.,12,Set(sipcount=${ENUMLOOKUP(+${EXTEN},sip,c,e164.org)}|counter=0)
exten => _X.,13,GotoIf($["${counter}"<"${sipcount}"]?14:17)
exten => _X.,14,Set(counter=$[${counter}+1])
exten => _X.,15,Dial(SIP/${ENUMLOOKUP(+${EXTEN},sip,${counter},e164.org)})
exten => _X.,16,GotoIf($["${counter}"<"${sipcount}"]?14:17)
;
exten => _X.,17,Set(iaxcount=${ENUMLOOKUP(+${EXTEN},iax2,c,e164.org)}|counter=0)
exten => _X.,18,GotoIf($["${counter}"<"${iaxcount}"]?19:22)
exten => _X.,19,Set(counter=$[${counter}+1])
exten => _X.,20,Dial(IAX2/${ENUMLOOKUP(+${EXTEN},iax2,${counter},e164.org)})
exten => _X.,21,GotoIf($["${counter}"<"${iaxcount}"]?19:22)
;
; ...then send out PRI.
;
exten => _X.,22,NoOp("No valid entries in e164.org for ${EXTEN} - sending out via Zap")
exten => _X.,23,Dial(Zap/g1/${EXTEN})
;
; end example 3
Retrieved from "https://onnocenter.or.id/wiki/index.php?title=Konfigurasi_ENUM_di_Asterisk&oldid=5263"