IPv6: Cisco: BGP enabling feature
Jump to navigation
Jump to search
enable configure terminal router bgp as-number no bgp default ipv4-unicast bgp router-id ip-address
enable
configure terminal
router bgp as-number
neighbor {ip-address | ipv6-address [%] | peer-group-name} remote-as autonomous-system-number [alternate-as autonomous-system-number ...]
address-family ipv6 [unicast | multicast]
neighbor {ip-address | peer-group-name | ipv6-address %} activate
enable
configure terminal
ipv6 unicast-routing
interface ethernet1/0
ip address 192.168.99.1 255.255.255.0
ipv6 address 2001:1::1/64
no shutdown
exit
interface ethernet1/1
ip address 192.168.10.1 255.255.255.0
ipv6 address 2001:10::1/64
no shutdown
exit
end
configure terminal
router bgp 10
! no bgp default ipv4-unicast
bgp router-id 192.168.99.1
network 192.168.10.0 mask 255.255.255.0
neighbor 2001:1::2 remote-as 20
address-family ipv6 unicast
network 2001:10::/64
neighbor 2001:1::2 activate
end