Dd: mount hasil dd
Sumber: https://major.io/2010/12/14/mounting-a-raw-partition-file-made-with-dd-or-dd_rescue-in-linux/
This situation might not affect everyone, but it struck me today and left me scratching my head. Consider a situation where you need to clone one drive to another with dd or when a hard drive is failing badly and you use dd_rescue to salvage whatever data you can.
Let’s say you cloned data from a drive using something like this:
# dd if=/dev/sda of=/mnt/nfs/backup/harddrive.img
Once that’s finished, you should end up with your partition table as well as the grub data from the MBR in your image file. If you run file against the image file you made, you should see something like this:
# file harddrive.img
harddrive.img: x86 boot sector; GRand Unified Bootloader, stage1 version 0x3, stage2 address 0x2000, stage2 segment 0x200, GRUB version 0.97; partition 1: ID=0x83, active, starthead 1, startsector 63, 33640047 sectors, code offset 0x48
What if you want to pull some files from this image without writing it out to another disk? Mounting it like a loop file isn’t going to work:
# mount harddrive /mnt/temp
mount: you must specify the filesystem type
The key is to mount the file with an offset specified. In the output from file, there is a particular portion of the output that will help you:
... startsector 63 ...
This means that the filesystem itself starts on sector 63. You can also view this with fdisk -l:
# fdisk -l harddrive.img
Device Boot Start End Blocks Id System harddrive.img * 63 33640109 16820023+ 83 Linux
Since we need to scoot 63 sectors ahead, and each sector is 512 bytes long, we need to use an offset of 32,256 bytes. Fire up the mount command and you’ll be on your way:
# mount -o ro,loop,offset=32256 harddrive.img /mnt/loop # mount | grep harddrive.img /root/harddrive.img on /mnt/loop type ext3 (ro,loop=/dev/loop1,offset=32256)
If you made this image under duress (due to a failing drive or other emergency), you might have to check and repair the filesystem first. Doing that is easy if you make a loop device:
# losetup --offset 32256 /dev/loop2 harddrive.img # fsck /dev/loop2
Once that’s complete, you can save some time and mount the loop device directly:
# mount /dev/loop2 /mnt/loop