OpenWRT: Flash UBNT Bullet M2

Firmware Install

To flash an already running bullet with original firmware (AirOS) on CLI, you must do this:

ssh root@yourbullet

url="http://downloads.openwrt.org/snapshots/trunk/ar71xx"
url="$url/openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin"

wget -O /tmp/fwupdate.bin "$url"
/usr/sbin/fwupdate -m

Firmware Install Ubnt Recovery Method

If you prefer TFTP, than you can update via holding down the reset-button for 10 seconds on startup, and send the firmware to 192.168.1.20

Referensi

• http://wiki.openwrt.org/toh/ubiquiti/bullet