OpenWRT: Flash Buffalo WZRHP300N

From OnnoWiki
Revision as of 05:09, 27 March 2013 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Sumber: http://wiki.openwrt.org/toh/buffalo/whr-hp-g300n


Buat Script

vi buatflashbuffalo.sh

Isi dengan

ifconfig eth0:11 192.168.11.2
arp -s 192.168.11.1 02:aa:bb:cc:dd:ff
curl -T openwrt-ar71xx-generic-wzr-hp-g300n-squashfs-tftp.bin tftp://192.168.11.1

Save script di tempat firmware openwrt tersebut berada.

  • Matikan Buffalo
  • Masukan kabel LAN PC ke LAN4 Buffalo yang pas sebelah Internet.
  • Masuk ke folder tempat image openwrt berada.
  • Jadi superuser
 sudo su
  • Masukan power Buffalo
  • Secepatnya jalankan
./buatflashbuffalo.sh

Akan tampak pada layar

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100 2560k    0     0  100 2560k      0   197k  0:00:12  0:00:12 --:--:--  367k
100 2560k    0     0  100 2560k      0   197k  0:00:12  0:00:12 --:--:--  197k

Jika kita cek arp -n akan tampak

arp -n
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.11.1             ether   02:aa:bb:cc:dd:23   CM                    eth0


Referensi