Difference between revisions of "OpenBTS: E110 UHD burn EEPROM RFX Board"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (New page: ^^^^^^^^^^^^^^^^^^^^^^^^^^^ RFX - Mod ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Older RFX boards require modifications to use the motherboard oscillator. If this is the case, UHD will print a warn...) |
Onnowpurbo (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | Sumber: http://code.ettus.com/redmine/ettus/projects/uhd/repository/revisions/c0dfc2cf47b98734c4218427c7c6f5eb92025a9c/diff | ||
| + | ==Modifikasi RFX Board== | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Older RFX boards require modifications to use the motherboard oscillator. | Older RFX boards require modifications to use the motherboard oscillator. | ||
| Line 33: | Line 30: | ||
./usrp_burn_db_eeprom --id=<tx_id> --unit=TX --args=<args> --slot=<slot> | ./usrp_burn_db_eeprom --id=<tx_id> --unit=TX --args=<args> --slot=<slot> | ||
| − | * <rx_id> | + | * <rx_id> pilih sesuai dengan RX ID untuk daughterboard |
| − | + | RFX400:** 0x0024 | |
| − | + | RFX900:** 0x0025 | |
| − | + | RFX1800:** 0x0034 | |
| − | + | RFX1200:** 0x0026 | |
| − | + | RFX2400:** 0x0027 | |
| − | * <tx_id> | + | * <tx_id> pilih sesuai dengan TX ID untuk daughterboard |
| − | + | RFX400:** 0x0028 | |
| − | + | RFX900:** 0x0029 | |
| − | + | RFX1800:** 0x0035 | |
| − | + | RFX1200:** 0x002a | |
| − | + | RFX2400:** 0x002b | |
* <args> are device address arguments (optional if only one USRP is on your machine) | * <args> are device address arguments (optional if only one USRP is on your machine) | ||
* <slot> is the name of the daughterboard slot (optional if the USRP has only one slot) | * <slot> is the name of the daughterboard slot (optional if the USRP has only one slot) | ||
| + | |||
| + | |||
| + | ==Referensi== | ||
| + | |||
| + | * http://code.ettus.com/redmine/ettus/projects/uhd/repository/revisions/c0dfc2cf47b98734c4218427c7c6f5eb92025a9c/diff | ||
Revision as of 11:30, 12 August 2012
Modifikasi RFX Board
Older RFX boards require modifications to use the motherboard oscillator.
If this is the case, UHD will print a warning about the modification.
Please follow the modification procedures below:
- Step 1: Disable the daughterboard clocks**
Move R64 to R84, Move R142 to R153
- Step 2: Connect the motherboard blocks**
Move R35 to R36, Move R117 to R115
These are all 0-ohm, so if you lose one, just short across the appropriate pads
- Step 3: Burn the appropriate daughterboard id into the EEPROM**
With the daughterboard plugged-in, run the following commands:
cd <prefix>/share/uhd/utils ./usrp_burn_db_eeprom --id=<rx_id> --unit=RX --args=<args> --slot=<slot> ./usrp_burn_db_eeprom --id=<tx_id> --unit=TX --args=<args> --slot=<slot>
- <rx_id> pilih sesuai dengan RX ID untuk daughterboard
RFX400:** 0x0024 RFX900:** 0x0025 RFX1800:** 0x0034 RFX1200:** 0x0026 RFX2400:** 0x0027
- <tx_id> pilih sesuai dengan TX ID untuk daughterboard
RFX400:** 0x0028 RFX900:** 0x0029 RFX1800:** 0x0035 RFX1200:** 0x002a RFX2400:** 0x002b
- <args> are device address arguments (optional if only one USRP is on your machine)
- <slot> is the name of the daughterboard slot (optional if the USRP has only one slot)