|
|
| Line 53: |
Line 53: |
| | apt-get install sqlite3 libsqlite3-dev | | apt-get install sqlite3 libsqlite3-dev |
| | | | |
| − | Load [[GNURadio]]
| |
| − |
| |
| − | sudo ldconfig
| |
| − | export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
| |
| − |
| |
| − | Cek apakah [[USRP]] [[GNURadio]] terinstalasi dengan baik menggunakan
| |
| − |
| |
| − | pkg-config --cflags usrp
| |
| − |
| |
| − | Harus keluar informasi, misalnya,
| |
| − |
| |
| − | -I/usr/local/include
| |
| − |
| |
| − | Jika tidak maka instalasi [[GNURadio]] gagal. Cara yang tampaknya baik bisa di baca di [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0 | Instalasi GNURadio 3.3.0 di Ubuntu 11.10]]
| |
| | | | |
| | ==Download Source Code OpenBTS via SVN== | | ==Download Source Code OpenBTS via SVN== |
| Line 106: |
Line 92: |
| | make | | make |
| | make install | | make install |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/apps | + | cd /usr/local/src/openbts-2.8.0/ |
| − | ln -s ../Transceiver52M/transceiver .
| |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/
| |
| − | sudo mkdir -p /usr/local/share/usrp/rev4/
| |
| − | sudo cp Transceiver52M/std_inband.rbf /usr/local/share/usrp/rev4/
| |
| − | | |
| − | Instalasi [[Database]] Konfigurasi [[OpenBTS]]
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk
| |
| − | sudo mkdir /etc/OpenBTS
| |
| − | rm /etc/OpenBTS/OpenBTS.db
| |
| − | sudo sqlite3 -init ./apps/OpenBTS.example.sql /etc/OpenBTS/OpenBTS.db ".quit"
| |
| − | | |
| − | Beberapa catatan minimal yang harus di set dari [[database]] [[OpenBTS]]
| |
| − | | |
| − | * GSM.Radio.Band - Set parameter ini untuk menentukan [[GSM]] band yang sesuai dengan [[hardware]] yang kita gunakan.
| |
| − | * GSM.Radio.C0 - Ini adalah [[ARFCN]]. Set sesuai dengan band yang kita gunakan.
| |
| − | * Control.LUR.OpenRegistration - Set menggunakan regular expression sesuai denan IMSI dari test phone. Parameter ini memberitahukan [[OpenBTS]] untuk tidak me-reject handset karena registration server di bawah tidak me-responds. Sehingga sangat bermanfaat untuk proses debugging dan inisialisasi sistem. Tentang regular expression dapat dibaca di http://en.wikipedia.org/wiki/Regular_expression
| |
| − | | |
| − | Agar semua SIM card register tanpa AMPUN konfigurasi pada prompt OpenBTS>
| |
| − | | |
| − | config Control.LUR.OpenRegistration \W+
| |
| − | config save
| |
| − | | |
| − | Baca tentang [[OpenBTS: 2.8 Konfigurasi | cara konfigurasi OpenBTS 2.8]]
| |
| − | | |
| − | ===Contoh Error Saat Compile OpenBTS===
| |
| − | | |
| − | Jika [[GNURadio]] tidak terinstalasi dengan baik akan keluar Error berikut
| |
| − | | |
| − | configure: error: Package requirements (usrp > 3.1) were not met:
| |
| − | No package 'usrp' found
| |
| − | Consider adjusting the PKG_CONFIG_PATH environment variable if you
| |
| − | installed software in a non-standard prefix.
| |
| − | Alternatively, you may set the environment variables USRP_CFLAGS
| |
| − | and USRP_LIBS to avoid the need to call pkg-config.
| |
| − | See the pkg-config man page for more details.
| |
| − | | |
| − | SOLUSI:
| |
| − | | |
| − | # [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2 | Gunakan GNURADIO 3.4.2]]
| |
| − | # Masukan PKG_CONFIG_PATH ke .bashrc
| |
| − | | |
| − | export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
| |
| − | | |
| − | ==Instalasi Subscriber Registry==
| |
| − | | |
| − | Lakukan
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/subscriberRegistry/trunk/configFiles
| |
| − | sudo mkdir /var/lib/asterisk/
| |
| − | sudo mkdir -p /var/lib/asterisk/sqlite3dir
| |
| − | sudo sqlite3 -init subscriberRegistryInit.sql /var/lib/asterisk/sqlite3dir/sqlite3.db ".quit"
| |
| − | | |
| − | ===Perlu di Hack ini?===
| |
| − | | |
| − | Buat link CGI
| |
| − | | |
| − | vi /etc/apache2/sites-enabled/000-default
| |
| − | | |
| − | ScriptAlias /cgi/ /usr/lib/cgi-bin/
| |
| − | <Directory "/usr/lib/cgi-bin">
| |
| − | AllowOverride None
| |
| − | Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
| |
| − | Order allow,deny
| |
| − | Allow from all
| |
| − | </Directory>
| |
| − | | |
| − | cd /usr/lib/cgi-bin/
| |
| − | ln -s /usr/local/src/openbts-2.8.0/subscriberRegistry/trunk/srmanager.cgi
| |
| − | | |
| − | Yang agak repot adalah menginstalasi Asterisk Real Time
| |
| − | | |
| − | ==Instalasi Sipauthserve==
| |
| − | | |
| − | Sipauthserve adalah daemon yang memberikan [[SIP]] authentication services. Variabel SIP.Proxy.Registration di [[OpenBTS]] harus menunjuk pada hostname & port Sipauthserve. [[OpenBTS]] harus sudah di buat sebelum membuat Sipauthserve.
| |
| − | | |
| − | Compile Sipauthserve
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/subscriberRegistry/trunk
| |
| − | make
| |
| − | | |
| − | Setup [[database]] untuk Sipauthserve
| |
| − | | |
| − | mkdir /etc/OpenBTS
| |
| − | rm /etc/OpenBTS/sipauthserve.db
| |
| − | cd /usr/local/src/openbts-2.8.0/subscriberRegistry/trunk
| |
| − | sudo sqlite3 -init sipauthserve.example.sql /etc/OpenBTS/sipauthserve.db ".quit"
| |
| − | | |
| − | ==Instalasi Smqueue==
| |
| − | | |
| − | Smqueue dapat di instalasi dengan melakukan langkah berikut
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/smqueue/trunk
| |
| − | autoreconf -i
| |
| − | ./configure
| |
| − | make clean
| |
| − | make
| |
| − | make install
| |
| − | | |
| − | Selanjutnya, inisialisasi konfigurasi [[database]] [[OpenBTS]]
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/smqueue/trunk
| |
| − | rm -Rf /etc/OpenBTS/smqueue.db
| |
| − | sudo sqlite3 -init smqueue/smqueue.example.sql /etc/OpenBTS/smqueue.db ".quit"
| |
| − | | |
| − | | |
| − | | |
| − | ==Cek Sebelum Menjalankan OpenBTS==
| |
| − | | |
| − | Cek [[USRP]] apakah sudah di deteksi [[sistem operasi]]
| |
| − | | |
| − | ls -lR /dev/bus/usb | grep usrp
| |
| − | | |
| − | Harusnya akan keluar seperti
| |
| − | | |
| − | crw-rw---- 1 root usrp 189, 2 2012-02-22 07:39 003
| |
| − | | |
| − | Cek sambungan antara PC ke USRP
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/Transceiver52M
| |
| − | ./USRPping
| |
| − | | |
| − | Harusnya keluar
| |
| − | | |
| − | ALERT 3078412512 USRPDevice.cpp:526:setTxFreq: set TX: 8.254e+08failed
| |
| − | baseband freq: 0
| |
| − | DDC freq: 5.74e+07
| |
| − | residual freq: 5.74e+07
| |
| − | ALERT 3078412512 USRPDevice.cpp:546:setRxFreq: set RX: 8.254e+08failed
| |
| − | baseband freq: 0
| |
| − | DDC freq: -6.6e+06
| |
| − | residual freq: -0.00596046
| |
| − | 19000: 0 0
| |
| − | 19001: 0 0
| |
| − | 19002: 0 0
| |
| − | 19003: 0 0
| |
| − | 19004: 0 0
| |
| − | 19005: 0 0
| |
| − | | |
| − | Contoh jika gagal
| |
| − | | |
| − | usrp_open_interface:usb_claim_interface: failed interface 2
| |
| − | could not claim interface 2: Device or resource busy
| |
| − | usrp_basic_rx: can't open rx interface
| |
| − | | |
| − | | |
| − | ===Error UHD===
| |
| − | | |
| − | Error saat USRPping
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/Transceiver52M
| |
| − | ./USRPping
| |
| − | | |
| − | Error
| |
| − | | |
| − | linux; GNU C++ version 4.6.1; Boost_104601; UHD_003.004.001-101-gff2649ca
| |
| − |
| |
| − | ALERT 3063285456 UHDDevice.cpp:409:parse_dev_type: USRP1 is not supported using the UHD driver
| |
| − | ALERT 3063285456 UHDDevice.cpp:410:parse_dev_type: Please compile with GNU Radio libusrp support
| |
| − | Segmentation fault
| |
| − | | |
| − | '''SOLUSI:'''
| |
| − | | |
| − | Kita punya masalah dengan UHD rupanya USRP1 tidak cocok dengan UHD. Lebih baik menggunakan GNURadio 3.4.2
| |
| − | | |
| − | ==Menjalankan OpenBTS==
| |
| − | | |
| − | [[OpenBTS: Yate Softswitch | Pastikan Yate sudah di Instalasi.]]
| |
| − | | |
| − | Lakukan di tiga (3) windows yang berbeda
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/subscriberRegistry/trunk/
| |
| − | ./sipauthserve &
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/smqueue/trunk/smqueue/
| |
| − | ./smqueue &
| |
| − | | |
| − | cd /usr/local/src/yate
| |
| − | rm /var/log/yate
| |
| − | ./run -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate -e /usr/local/share/yate -d
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/apps
| |
| − | ./OpenBTS &
| |
| − | | |
| − | Kalau di lihat di background
| |
| − | | |
| − | ps ax
| |
| − | | |
| − | Akan terlihat kira-kira
| |
| − | | |
| − | 23253 pts/4 S 0:00 ./sipauthserve
| |
| − | 23254 pts/4 S 0:00 ./smqueue
| |
| − | 23258 ? Ssl 0:03 ./yate -t -l /var/log/yate -vvvv -c /usr/local/etc/yate -m /usr/local/lib/yate
| |
| − | 23276 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_Call_Provisioning.py 10
| |
| − | 23278 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_Route_Local.py 10
| |
| − | 23280 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_Route_Provisioning.py 10
| |
| − | 23282 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_SMS_Echo.py 10|vbts_tp_dest
| |
| − | 23284 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_SMS_Provisioning.py 50
| |
| − | 23286 ? S 0:00 /usr/bin/python /usr/local/share/yate/scripts/VBTS_SMS_Route.py 50
| |
| − | 23303 pts/4 Sl 0:00 ./OpenBTS
| |
| − | 23308 pts/4 Sl 0:00 ./transceiver 1
| |
| − | | |
| − | | |
| − | | |
| − | ==Pastikan Yate Beroperasi dengan Baik==
| |
| − | | |
| − | Lihat
| |
| − | | |
| − | vi /var/log/yate
| |
| − | | |
| − | Pastikan
| |
| − | | |
| − | Initializing module ExtModule
| |
| − | Loading external module 'VBTS_Call_Route.py' '10'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_Call_Route.py' '10'
| |
| − | Loading external module 'VBTS_Call_Originate.py' '10'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_Call_Originate.py' '10'
| |
| − | Loading external module 'VBTS_Call_Provisioning.py' '10'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_Call_Provisioning.py' '10'
| |
| − | Loading external module 'VBTS_Route_Local.py' '10'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_Route_Local.py' '10'
| |
| − | Loading external module 'VBTS_Route_Provisioning.py' '10'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_Route_Provisioning.py' '10'
| |
| − | Loading external module 'VBTS_SMS_Echo.py' '10|vbts_tp_dest_address|^100$'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_SMS_Echo.py' '10|vbts_tp_dest_address|^100$'
| |
| − | Loading external module 'VBTS_SMS_Provisioning.py' '50'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_SMS_Provisioning.py' '50'
| |
| − | Loading external module 'VBTS_SMS_Route.py' '50'
| |
| − | Execing '/usr/local/share/yate/scripts/VBTS_SMS_Route.py' '50'
| |
| − | Loading external module 'VBTS_SMS_Send.py' '50'
| |
| − | Initializing module SIP Channel
| |
| − | ..
| |
| − | ..
| |
| − | ..
| |
| − | Yate engine is initialized and starting up on openbts28
| |
| − | <INFO> Creating new message dispatching thread (0 running)
| |
| − | VBTS Provisioning Starting
| |
| − | VBTS Provisioning_SMS Installing sip.message at 50
| |
| − | VBTS Provisioner Starting
| |
| − | VBTS Provisioner Installing chan.dtmf
| |
| − | VBTS Provisioner Installing chan.notify
| |
| − | VBTS Echo_SMS filtering: [('vbts_tp_dest_address', <_sre.SRE_Pattern object at 0xb703c2c0>)]
| |
| − | VBTS Echo Starting
| |
| − | VBTS Echo_SMS Installing sip.message at 10
| |
| − | VBTS Route Provisioning on
| |
| − | VBTS Echo Starting
| |
| − | VBTS Echo_SMS Installing call.route at 10
| |
| − | VBTS SMS_Route filtering: []
| |
| − | VBTS SMS_Route Starting
| |
| − | VBTS SMS_Route Installing sip.message at 50
| |
| − | VBTS Route Local on
| |
| − | VBTS Echo Starting
| |
| − | VBTS Echo_SMS Installing call.route at 10
| |
| − | | |
| − | ==Mengkonfigurasi OpenBTS==
| |
| − | | |
| − | OpenBTS saat ini menggunakan CLI sendiri untuk di konfigurasi. Ini bisa di akses melalui
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/apps
| |
| − | ./OpenBTSCLI
| |
| − | | |
| − | Lebih detail-nya bisa di baca di [[OpenBTS: 2.8 Konfigurasi | Konfigurasi OpenBTS 2.8]]
| |
| − | | |
| − | ==Beberapa Error==
| |
| − | | |
| − | Saat menjalankan [[OpenBTS]] akan keluar Error
| |
| − | | |
| − | ALERT 3079285616 USRPDevice.cpp:546:setRxFreq: set RX: 9.002e+08failed
| |
| − | baseband freq: 8.96e+08
| |
| − | DDC freq: -4.2e+06
| |
| − | residual freq: 0.00298023
| |
| − | ALERT 3079285616 Transceiver.cpp:540:driveControl: RX failed to tune
| |
| − | ALERT 3079272144 TRXManager.cpp:342:tune: RXTUNE failed with status 1
| |
| − | ALERT 3079272144 TRXManager.cpp:395:powerOn: POWERON failed with status 1
| |
| − | ALERT 3079272144 TRXManager.cpp:409:setPower: SETPOWER failed with status 1
| |
| − | ALERT 3079272144 TRXManager.cpp:409:setPower: SETPOWER failed with status 1
| |
| − | 1329902709.029597 3079272144:
| |
| − |
| |
| − | Welcome to OpenBTS. Type "help" to see available commands.
| |
| − |
| |
| − | OpenBTS> ALERT 3045964656 TRXManager.cpp:409:setPower: SETPOWER failed with status 1
| |
| − | ALERT 3068914544 TRXManager.cpp:86:clockHandler: TRX clock interface timed out, assuming TRX is dead.
| |
| − | Aborted
| |
| − | | |
| − | Biasanya ini di barengi dengan konsumsi CPU yang sangat tinggi.
| |
| − | | |
| − | '''PROBLEM:''' Kemungkinan besar anda menjalankan program transceiver yang salah.
| |
| − | Untuk USRP 64MHz gunakan Transceiver/transceiver.
| |
| − | Untuk USRP 52MHz gunakan Transceiver52M/transceiver.
| |
| − | | |
| − | '''SOLUSI:''' Set path TRX.Path yang benar di OpenBTS.config.
| |
| − | | |
| − | | |
| − | | |
| − | | |
| − | ===Error SubscriberRegistry Configurasi===
| |
| − | | |
| − | Keluar error saat menjalankan subscriberRegistry
| |
| − | | |
| − | cannot find configuration value Log.Level
| |
| − | terminate called after throwing an instance of 'ConfigurationTableKeyNotFound'
| |
| − | | |
| − | SOLUSI:
| |
| − | * Tampaknya ini karena sqlite belum di install & di jalankan.
| |
| − | | |
| − | ===Error SubscriberRegistry database===
| |
| − | | |
| − | Keluar error saat menjalankan OpenBTS
| |
| − | | |
| − | EMERG 3077609168 SubscriberRegistry.cpp:160:init: Cannot open SubscriberRegistry database: unable to open database file
| |
| − | | |
| − | '''SOLUSI:'''
| |
| − | | |
| − | Lakukan Instalasi Subscriber Registry
| |
| − | | |
| − | ===Error SubscriberRegistry.UpstreamServer===
| |
| − | | |
| − | Keluar error saat menjalankan smqueue server
| |
| − | | |
| − | cannot find configuration value SubscriberRegistry.UpstreamServer
| |
| − | | |
| − | '''SOLUSI:'''
| |
| − | | |
| − | Jalankan SipAuth Server sebelum smqueue server
| |
| − | | |
| − | ===Error Stray Transceiver Process===
| |
| − | | |
| − | Masalah:
| |
| − | | |
| − | cd /usr/local/src/openbts-2.8.0/openbts/trunk/apps
| |
| − | ./OpenBTS
| |
| − | | |
| − | Keluar message error
| |
| − |
| |
| − | bind() failed: Address already in use
| |
| − | terminate called after throwing an instance of 'SocketError'
| |
| − | Aborted
| |
| − | | |
| − | '''PROBLEM:''' OpenBTS shutdown tidak bersih dan masih ada proses transceiver yang masih jalan.
| |
| − | | |
| − | '''SOLUSI:''' Kill proses transceiver yang masih jalan dan coba sekali lagi seperti di bawah ini.
| |
| − | | |
| − | ps | grep transceiver
| |
| − | | |
| − | Keluar misalnya
| |
| − | | |
| − | 30208 pts/1 00:00:00 transceiver
| |
| − | | |
| − | Kill
| |
| − | | |
| − | kill -KILL 30208
| |
| − | | |
| − | atau
| |
| − | | |
| − | killall transceiver
| |
| − | | |
| − | ==Referensi==
| |
| − | | |
| − | * http://wush.net/trac/rangepublic/wiki/BuildInstallRun
| |
| − | * http://gnuradio.org/redmine/projects/gnuradio/wiki/OpenBTSBuildingAndRunning
| |
| − | * http://en.wikipedia.org/wiki/Regular_expression
| |
| − | * http://www.mentby.com/modesto-aguirre-gomez/is-it-possible-to-run-the-usrp-at-64mhz-with-openbts28.html
| |
| − | * http://www.mentby.com/Group/openbts-discuss/is-it-possible-to-run-the-usrp-at-64mhz-with-openbts28.html
| |
| − | | |
| − | ==Pranala Menarik==
| |
| − | | |
| − | * [[OpenBTS]]
| |
| − | | |
| − | ===Persiapan===
| |
| − | | |
| − | * [[USRP: High Precision Clock]]
| |
| − | * [[USRP: Menyambungkan ClockTamer ke USRP1]]
| |
| − | * [[USRP: Kalibrasi ClockTamer]]
| |
| − | * [[USRP: ClockTamer Control Protocol]]
| |
| − | * [[USRP: Instalasi Board]]
| |
| − | * [[OpenBTS: GIT Source Code]]
| |
| − | * [[USRP: Rangkaian Board USRP]]
| |
| − | * [[OpenBTS: Tethr untuk Bencana Alam]]
| |
| − | | |
| − | ===OpenBTS 2.6===
| |
| − | | |
| − | * [[GNURadio]]
| |
| − | * [[GNURadio: Ubuntu Install]]
| |
| − | * [[GNURadio: Menggunakan UHD]]
| |
| − | * [[GNURadio: Ubuntu Install GNURadio 3.4.2]] '''RECOMMENDED'''
| |
| − | * [[GNURadio: Ubuntu Install GNURadio 3.4.2 Clock 52MHz]] '''RECOMMENDED'''
| |
| − | * [[GNURadio: Contoh Aplikasi]]
| |
| − | * [[GNURadio: Spectrum Analizer GSM]]
| |
| − | * [[GNURadio: Mengubah board RFX1800 menjadi RFX900]]
| |
| − | * [[GNURadio: Programming Untuk Pemula]]
| |
| − | * [[OpenBTS: Ubuntu Install]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: Ubuntu Install OpenBTS 2.6 Clock 52MHz]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: Konfigurasi]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: Kalibrasi]]
| |
| − | * [[OpenBTS: Konfigurasi Asterisk untuk OpenBTS]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: Menjalankan smqueue]]
| |
| − | * [[OpenBTS: Mengoperasikan BTS]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: Tampilan di Nokia saat pakai OpenBTS]]
| |
| − | * [[OpenBTS: Operasi 1800 MHz]]
| |
| − | * [[OpenBTS: Beberapa Tips]]
| |
| − | * [[OpenBTS: USRP2]]
| |
| − | * [[OpenBTS: Amplifier]]
| |
| − | * [[OpenBTS: SMS]]
| |
| − | * [[AirProbe]]
| |
| − | | |
| − | ===OpenBTS 2.8===
| |
| − | | |
| − | * [[GNURadio: Ubuntu 11.10 Install]] ''NOT RECOMMENED''
| |
| − | * [[GNURadio: Ubuntu 11.10 instalasi menggunakan Repo]] ''NOT RECOMMENDED''
| |
| − | * [[GNURadio: Download GNURadio]]
| |
| − | * [[GNURadio: Install UHD]]
| |
| − | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.3.0]]
| |
| − | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
| |
| − | * [[GNURadio: Ubuntu 12.04 Instal GNURadio 3.4.2]] '''RECOMMENDED'''
| |
| − | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.0]] ''NOT RECOMMENDED''
| |
| − | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.5.3.2]] ''NOT RECOMMENDED''
| |
| − | * [[GNURadio: Ubuntu 11.10 Instal GNURadio 3.6.0]] ''NOT RECOMMENDED''
| |
| − | * [[GNURadio: Ubuntu 11.10 Install dari GIT GNURadio]] ''NOT RECOMMENDED''
| |
| − | * [[GNURadio: Ubuntu 11.10 cek USRP Daughter Board]]
| |
| − | * [[GNURadio: UHD]]
| |
| − | * [[GNURadio: UHD Image]]
| |
| − | * [[GNURadio: UHD Identifikasi Device]]
| |
| − | * [[OpenBTS: Ubuntu 11.10 Install]]
| |
| − | * [[OpenBTS: dari GIT ttsou]]
| |
| − | * [[OpenBTS: 2.8 dari SVN Install]]
| |
| − | * [[OpenBTS: 2.8 dari SVN Install Clock 52MHz]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: 2.8 Edit User di sqlite3.db]] '''RECOMMEND'''
| |
| − | * [[OpenBTS: Yate Softswitch]]
| |
| − | * [[OpenBTS: Yate Config Test]]
| |
| − | * [[OpenBTS: 2.8 Instalasi Real Time Asterisk]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: 2.8 Menjalankan]] '''RECOMMENDED'''
| |
| − | * [[OpenBTS: 2.8 Konfigurasi]]
| |
| − | * [[OpenBTS: 2.8 Konfigurasi Subscriber Registery]]
| |
| − | * [[OpenBTS: Database SQLite]]
| |
| − | | |
| − | ===Multi OpenBTS 2.8===
| |
| − | | |
| − | * [[OpenBTS: Pola Multi OpenBTS]]
| |
| − | | |
| − | ===Ettus E110===
| |
| − | | |
| − | * [[OpenBTS: E110 Cara Login]]
| |
| − | * [[OpenBTS: E110 Install Image di MicroSD]] '''*RECOMMENDED*'''
| |
| − | * [[OpenBTS: E110 Cek Daughter Board]]
| |
| − | * [[OpenBTS: E110 Mengubah Master Clock]]
| |
| − | * [[OpenBTS: E110 Kalibrasi Clock]]
| |
| − | * [[OpenBTS: E110 Bekerja dengan opkg]]
| |
| − | * [[OpenBTS: E110 GNURadio]]
| |
| − | * [[OpenBTS: E110 Compile UHD]] '''*RECOMMENDED*'''
| |
| − | * [[OpenBTS: E110 UHD burn EEPROM RFX Board]] '''*RECOMMENDED*'''
| |
| − | * [[OpenBTS: E110 Install UHD Image]] '''*RECOMMENDED*'''
| |
| − | * [[OpenBTS: E110 Instalasi OpenBTS]]
| |
| − | * [[OpenBTS: E110 Instalasi OpenBTS 2.6]] ''NOT RECOMMENDED''
| |
| − | * [[OpenBTS: E110 Instalasi OpenBTS 2.8 untuk MultiBTS]] '''*RECOMMENDED*'''
| |
| − | | |
| − | ===GPRS===
| |
| − | | |
| − | * [[OpenBTS: GPRS]]
| |
| − | | |
| − | ===Power Amplifier===
| |
| − | | |
| − | * [[Driver 900MHz]]
| |
| − | * [[Power Amplifier 900MHz]]
| |
| − | * [[Duplexer]]
| |
| − | | |
| − | ===Lain Lain===
| |
| − | | |
| − | * [[OpenBTS: Materi Magang di ICTWATCH]]
| |
| − | * [[OpenBTS: Seminar Outline]]
| |
| − | * [[OpenBTS: Workshop Outline]]
| |
| − | * [[Membuat Base Station GSM Open Source]]
| |
| − | * [[Teknologi Selular]]
| |
| − | * [[GSM: Daftar Channel Frekuensi]]
| |
| − | * [[Wireless Internet]]
| |
| − | * [[OpenBSC]]
| |
| − | * [[AirProbe]]
| |
| − | * [[Base station subsystem]]
| |
| − | * [[GSM]]
| |
| − | * [[Asterisk]]
| |
| − | * [[Mobile phone]]
| |
| − | | |
| − | ===Catatan Legal dan Pendukung===
| |
| − | | |
| − | * [[Siapa Bilang OpenBTS Ilegal?]]
| |
| − | * [[OpenBTS: Catatan MNC dan MCC Indonesia]]
| |
| − | * [[OpenBTS: Catatan MNC dan MCC COOL]]
| |
| − | * [[OpenBTS : Alokasi Frekuensi Operator GSM Indonesia]]
| |
| − | * [[GSM: Daftar Channel Frekuensi]]
| |
| − | | |
| − | ===Catatan Sejarah===
| |
| − | | |
| − | * [[2011/04/30 - Workshop OpenBTS Pertama di Indonesia dilakukan di Univ Gajah Putih Takengon Aceh Tengah]]
| |
| − | * [[OpenBTS: Daftar Workshop atau Seminar yang pernah dilakukan]]
| |
| − | * [[OpenBTS: Daftar Artikel di Media]]
| |
| − | | |
| − | ===Dokumentasi Video===
| |
| − | | |
| − | * http://youtu.be/8ogOcUSpINU (1/6)
| |
| − | * http://youtu.be/F5d7HGuhppk (2/6)
| |
| − | * http://youtu.be/90Jgq6bOgrQ (3/6)
| |
| − | * http://youtu.be/cNkx_qNqdfc (4/6)
| |
| − | * http://youtu.be/6LCuoeI57ak (5/6)
| |
| − | * http://youtu.be/-dEqcHoIlYk (6/6)
| |
| − | | |
| − | [[Category: Wireless]]
| |
| − | [[Category: Selular]]
| |
