Mikrotik: OSPF Sederhana

From OnnoWiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Image6005.gif

Sambungan

R1
eth0: -- R3: eth0
eth1: -- R2: eth0
eth2: -- Internet
R2:
eth0: -- R1: eth1
eth1: -- R3: eth1
eth2: -- LAN 172.16.1.1/16
R3:
eth0: -- R1: eth0
eth1: -- R2: eth1
eth2: -- LAN 192.168.1.1/24


IP address

Router1:

/ip address add address=10.10.1.1/30 interface=ether1
/ip address add address=10.10.1.5/30 interface=ether2
# /ip address add address=192.168.122.100/24 interface=ether3
# /ip address add address=192.168.122.101/24 interface=ether3
# /ip address add address=192.168.122.102/24 interface=ether3
/ip dhcp-client remove number=0
/ip dhcp-client add interface=ether3 disabled=no        # kalau ether3 DHCP client
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquerade
/ip firewall nat print

Router2:

/ip address add address=10.10.1.6/30 interface=ether1
/ip address add address=10.10.1.9/30 interface=ether2
/ip address add address=172.16.1.1/16 interface=ether3

Router3:

/ip address add address=10.10.1.2/30 interface=ether1
/ip address add address=10.10.1.10/30 interface=ether2
/ip address add address=192.168.1.1/24 interface=ether3

OSPF

Ada tiga (3) elemen dasar konfigurasi OSPF:

  • Enable OSPF instance
  • OSPF area configuration
  • OSPF network configuration

instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.


R1:

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.1 numbers=0 
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.0/30 area=backbone
/routing ospf network add network=10.10.1.4/30 area=backbone 

R2:

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.6 numbers=0
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.4/30 area=backbone 
/routing ospf network add network=10.10.1.8/30 area=backbone 
/routing ospf network add network=172.16.0.0/16 area=backbone

R3:

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.2 numbers=0
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.0/30 area=backbone 
/routing ospf network add network=10.10.1.8/30 area=backbone 
/routing ospf network add network=192.168.1.0/24 area=backbone

Cek

/routing ospf instance print 
Flags: X - disabled 
 0   name="default" router-id=10.10.1.1 distribute-default=never 
     redistribute-connected=as-type-1 redistribute-static=as-type-1 
     redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no 
     metric-default=1 metric-connected=20 metric-static=20 metric-rip=20 
     metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in out-filter=ospf-out



Verify

Cek

R1:

/routing ospf interface print
/routing ospf neighbor print
/ip route print

Lakukan yang sama untuk R2, R3





Referensi

Pranala Menarik