Difference between revisions of "Mikrotik: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 1: | Line 1: | ||
[[File:Image6005.gif|center|900px|thumb]] | [[File:Image6005.gif|center|900px|thumb]] | ||
| − | + | ==Sambungan== | |
| − | Sambungan | ||
R1 | R1 | ||
| Line 19: | Line 18: | ||
eth2: -- LAN 192.168.1.1/24 | eth2: -- LAN 192.168.1.1/24 | ||
| + | |||
| + | ==IP address== | ||
Router1: | Router1: | ||
| Line 43: | Line 44: | ||
/ip address add address=10.10.1.10/30 interface=ether2 | /ip address add address=10.10.1.10/30 interface=ether2 | ||
/ip address add address=192.168.1.1/24 interface=ether3 | /ip address add address=192.168.1.1/24 interface=ether3 | ||
| + | |||
| + | ==OSPF== | ||
| Line 52: | Line 55: | ||
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut | instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut | ||
| + | Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0. | ||
| + | |||
R1: | R1: | ||
| Line 58: | Line 63: | ||
/routing ospf instance set name=default router-id=10.10.1.1 numbers=0 | /routing ospf instance set name=default router-id=10.10.1.1 numbers=0 | ||
/routing ospf instance enable numbers=0 | /routing ospf instance enable numbers=0 | ||
| + | /routing ospf network add network=10.10.1.0/30 area=backbone | ||
| + | /routing ospf network add network=10.10.1.4/30 area=backbone | ||
R2: | R2: | ||
| Line 64: | Line 71: | ||
/routing ospf instance set name=default router-id=10.10.1.6 numbers=0 | /routing ospf instance set name=default router-id=10.10.1.6 numbers=0 | ||
/routing ospf instance enable numbers=0 | /routing ospf instance enable numbers=0 | ||
| + | /routing ospf network add network=10.10.1.4/30 area=backbone | ||
| + | /routing ospf network add network=10.10.1.8/30 area=backbone | ||
| + | /routing ospf network add network=172.16.0.0/16 area=backbone | ||
R3: | R3: | ||
| Line 70: | Line 80: | ||
/routing ospf instance set name=default router-id=10.10.1.2 numbers=0 | /routing ospf instance set name=default router-id=10.10.1.2 numbers=0 | ||
/routing ospf instance enable numbers=0 | /routing ospf instance enable numbers=0 | ||
| + | /routing ospf network add network=10.10.1.0/30 area=backbone | ||
| + | /routing ospf network add network=10.10.1.8/30 area=backbone | ||
| + | /routing ospf network add network=192.168.1.0/24 area=backbone | ||
Cek | Cek | ||
| Line 83: | Line 96: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Verify== | ==Verify== | ||
Revision as of 06:59, 2 January 2019
Sambungan
R1 eth0: -- R3: eth0 eth1: -- R2: eth0 eth2: -- Internet
R2: eth0: -- R1: eth1 eth1: -- R3: eth1 eth2: -- LAN 172.16.1.1/16
R3: eth0: -- R1: eth0 eth1: -- R2: eth1 eth2: -- LAN 192.168.1.1/24
IP address
Router1:
/ip address add address=10.10.1.1/30 interface=ether1 /ip address add address=10.10.1.5/30 interface=ether2 /ip address add address=192.168.122.100/24 interface=ether3 # /ip address add address=192.168.122.101/24 interface=ether3 # /ip address add address=192.168.122.102/24 interface=ether3 # /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade /ip firewall nat print
Router2:
/ip address add address=10.10.1.6/30 interface=ether1 /ip address add address=10.10.1.9/30 interface=ether2 /ip address add address=172.16.1.1/16 interface=ether3
Router3:
/ip address add address=10.10.1.2/30 interface=ether1 /ip address add address=10.10.1.10/30 interface=ether2 /ip address add address=192.168.1.1/24 interface=ether3
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.1 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.4/30 area=backbone
R2:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.6 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.4/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=172.16.0.0/16 area=backbone
R3:
# /routing ospf instance add name=default /routing ospf instance set name=default router-id=10.10.1.2 numbers=0 /routing ospf instance enable numbers=0 /routing ospf network add network=10.10.1.0/30 area=backbone /routing ospf network add network=10.10.1.8/30 area=backbone /routing ospf network add network=192.168.1.0/24 area=backbone
Cek
/routing ospf instance print
Flags: X - disabled
0 name="default" router-id=10.10.1.1 distribute-default=never
redistribute-connected=as-type-1 redistribute-static=as-type-1
redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no
metric-default=1 metric-connected=20 metric-static=20 metric-rip=20
metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in out-filter=ospf-out
Verify
Cek
R1:
/routing ospf interface print /routing ospf neighbor print /ip route print
Lakukan yang sama untuk R2, R3
Referensi