Mikrotik: Multiple Gateway - Load Balancing

From OnnoWiki
Revision as of 05:39, 2 October 2020 by Onnowpurbo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Ada 2 sambungan ke Internet lewat ether1 dan ether2

# Kalau WAN IP Dynamic
/ip dhcp-client print
/ip dhcp-client add interface=ether1 disable=no
/ip dhcp-client add interface=ether2 disable=no
/ip route print


# kalau WAN IP Statik dapat menggunakan perintah di bawah ini.
/ip address
add address=192.168.101.2/30 interface=ether1
add address=192.168.102.2/30 interface=ether2
add address=10.10.10.1/24 interface=wlan2
/ip dns
set allow-remote-requests=yes primary-dns=208.67.222.222 secondary-dns=208.67.220.220
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.101.1 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.102.1 distance=2 check-gateway=ping

Setup NAT

/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
add action=masquerade chain=srcnat out-interface=ether2

Setup LAN

/interface bridge
add name=bridge1
/interface bridge port
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether ...dst s/d 8 (tergantung jumlah ethernet card yang dialokasikan).
/ip address add interface=bridge1 address=172.16.100.1/24
/ip route add gateway=bridge1
/ip dns set servers=8.8.8.8
/ip dns set allow-remote-request=yes

Setup DHCP Server dapat menggunakan

/ip dhcp-server setup