Linux: Interface BONDING dengan NETPLAN di Ubuntu 18.04
Jump to navigation
Jump to search
Sumber: https://www.snel.com/support/how-to-set-up-lacp-bonding-on-ubuntu-18-04-with-netplan/
Install Pendukung
apt install ifupdown ifenslave
Aktifkan Module
sudo su vi /etc/modules
# /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. bonding mode=6 miimon=100
Aktifkan module
modprobe --first-time bonding modprobe bonding modinfo bonding | more
Edit Interface
vi /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg
# This file is generated from information provided by # the datasource. Changes to it will not persist across an instance. # To disable cloud-init's network configuration capabilities, write a file # /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg with the following: # network: {config: disabled} network: version: 2 ethernets: eports: match: name: enp* optional: true bonds: bond0: interfaces: [eports] addresses: [192.168.0.8] gateway4: 192.168.0.223 nameservers: addresses: [192.168.0.223, 192.168.0.222] parameters: mode: 802.3ad lacp-rate: fast mii-monitor-interval: 100
Reboot and Check
reboot cat /proc/net/bonding/bond0