Keras: Introduction to the Adam Optimization Algorithm

Sumber: https://machinelearningmastery.com/adam-optimization-algorithm-for-deep-learning/

Pilihan algoritma optimalisasi untuk model deep learning dapat berarti perbedaan antara hasil yang baik dalam hitungan menit, jam, dan hari.

Adam optimization algorithm adalah extension dari stochastic gradient descent yang baru-baru ini memperoleh adopsi yang lebih luas untuk aplikasi deep learning dalam computer vision dan natural language processing.

Dalam tulisan ini, anda akan mendapatkan pengantar tentang Adam optimization algorithm untuk digunakan dalam deep learning.

Setelah membaca posting ini, anda akan tahu:

• Apa algoritma Adam dan beberapa manfaat menggunakan metode untuk mengoptimalkan model anda.
• Bagaimana algoritma Adam bekerja dan bagaimana perbedaannya dari metode terkait AdaGrad dan RMSProp.
• Bagaimana algoritma Adam dapat dikonfigurasi dan parameter konfigurasi yang umum digunakan.

Apakah Adam optimization algorithm?

Adam adalah algoritme pengoptimalan yang dapat digunakan sebagai ganti dari prosedur stochastic gradient descent klasik untuk memperbarui weight network secara iteratif berdasarkan data training.

Adam pertama kali di presentasikan oleh Diederik Kingma dari OpenAI dan Jimmy Ba dari University of Toronto dalam paper mereka di 2015 ICLR yang berjudul “Adam: A Method for Stochastic Optimization“.

Algoritma ini di sebut Adam. Itu bukan singkatan dan tidak ditulis sebagai “ADAM”.

   … the name Adam is derived from adaptive moment estimation.

Ketika memperkenalkan algoritma, penulis memberikan daftar manfaat yang menarik dengan penggunaan Adam pada masalah non-convex optimization, sebagai berikut:

• Straightforward to implement.
• Computationally efficient.
• Little memory requirements.
• Invariant to diagonal rescale of the gradients.
• Well suited for problems that are large in terms of data and/or parameters.
• Appropriate for non-stationary objectives.
• Appropriate for problems with very noisy/or sparse gradients.
• Hyper-parameters have intuitive interpretation and typically require little tuning.

Bagaimana Cara Kerja Adam?

Adam berbeda dengan classical stochastic gradient descent.

Stochastic gradient descent menjaga satu learning rate (alpha) untuk semua weight update dan learning rate tidak berubah saat training.

Learning rate dipertahankan untuk setiap weight network (parameter) dan diadaptasi secara terpisah saat learning dibuka.

• Metoda Adam menghitung individual adaptive learning rates untuk parameter yang berbeda dari perkiraan momen pertama dan kedua dari gradien.

Para penulis menggambarkan Adam sebagai menggabungkan keuntungan dari dua ekstensi lain dari stochastic gradient descent. Secara khusus:

• Adaptive Gradient Algorithm (AdaGrad) yang mempertahankan per-parameter learning rate yang meningkatkan kinerja pada problem dengan sparse gradients (mis. natural language dan computer vision problem).
• Root Mean Square Propagation (RMSProp) that also maintains per-parameter learning rates that are adapted based on the average of recent magnitudes of the gradients for the weight (e.g. how quickly it is changing). This means the algorithm does well on online and non-stationary problems (e.g. noisy).

Adam realizes the benefits of both AdaGrad and RMSProp.

Instead of adapting the parameter learning rates based on the average first moment (the mean) as in RMSProp, Adam also makes use of the average of the second moments of the gradients (the uncentered variance).

Specifically, the algorithm calculates an exponential moving average of the gradient and the squared gradient, and the parameters beta1 and beta2 control the decay rates of these moving averages.

The initial value of the moving averages and beta1 and beta2 values close to 1.0 (recommended) result in a bias of moment estimates towards zero. This bias is overcome by first calculating the biased estimates before then calculating bias-corrected estimates.

The paper is quite readable and I would encourage you to read it if you are interested in the specific implementation details.

Adam is Effective

Adam is a popular algorithm in the field of deep learning because it achieves good results fast.

   Empirical results demonstrate that Adam works well in practice and compares favorably to other stochastic optimization methods.

In the original paper, Adam was demonstrated empirically to show that convergence meets the expectations of the theoretical analysis. Adam was applied to the logistic regression algorithm on the MNIST digit recognition and IMDB sentiment analysis datasets, a Multilayer Perceptron algorithm on the MNIST dataset and Convolutional Neural Networks on the CIFAR-10 image recognition dataset. They conclude:

   Using large models and datasets, we demonstrate Adam can efficiently solve practical deep learning problems.

Comparison of Adam to Other Optimization Algorithms Training a Multilayer Perceptron

Comparison of Adam to Other Optimization Algorithms Training a Multilayer Perceptron Taken from Adam: A Method for Stochastic Optimization, 2015.

Sebastian Ruder developed a comprehensive review of modern gradient descent optimization algorithms titled “An overview of gradient descent optimization algorithms” published first as a blog post, then a technical report in 2016.

The paper is basically a tour of modern methods. In his section titled “Which optimizer to use?“, he recommends using Adam.

   Insofar, RMSprop, Adadelta, and Adam are very similar algorithms that do well in similar circumstances. […] its bias-correction helps Adam slightly outperform RMSprop towards the end of optimization as gradients become sparser. Insofar, Adam might be the best overall choice.

In the Stanford course on deep learning for computer vision titled “CS231n: Convolutional Neural Networks for Visual Recognition” developed by Andrej Karpathy, et al., the Adam algorithm is again suggested as the default optimization method for deep learning applications.

   In practice Adam is currently recommended as the default algorithm to use, and often works slightly better than RMSProp. However, it is often also worth trying SGD+Nesterov Momentum as an alternative.

And later stated more plainly:

   The two recommended updates to use are either SGD+Nesterov Momentum or Adam.

Adam is being adapted for benchmarks in deep learning papers.

For example, it was used in the paper “Show, Attend and Tell: Neural Image Caption Generation with Visual Attention” on attention in image captioning and “DRAW: A Recurrent Neural Network For Image Generation” on image generation.

Do you know of any other examples of Adam? Let me know in the comments.

Adam Configuration Parameters

• alpha. Also referred to as the learning rate or step size. The proportion that weights are updated (e.g. 0.001). Larger values (e.g. 0.3) results in faster initial learning before the rate is updated. Smaller values (e.g. 1.0E-5) slow learning right down during training
• beta1. The exponential decay rate for the first moment estimates (e.g. 0.9).
• beta2. The exponential decay rate for the second-moment estimates (e.g. 0.999). This value should be set close to 1.0 on problems with a sparse gradient (e.g. NLP and computer vision problems).
• epsilon. Is a very small number to prevent any division by zero in the implementation (e.g. 10E-8).

Further, learning rate decay can also be used with Adam. The paper uses a decay rate alpha = alpha/sqrt(t) updted each epoch (t) for the logistic regression demonstration.

The Adam paper suggests:

   Good default settings for the tested machine learning problems are alpha=0.001, beta1=0.9, beta2=0.999 and epsilon=10−8

The TensorFlow documentation suggests some tuning of epsilon:

   The default value of 1e-8 for epsilon might not be a good default in general. For example, when training an Inception network on ImageNet a current good choice is 1.0 or 0.1.

We can see that the popular deep learning libraries generally use the default parameters recommended by the paper.

TensorFlow: learning_rate=0.001, beta1=0.9, beta2=0.999, epsilon=1e-08.
Keras: lr=0.001, beta_1=0.9, beta_2=0.999, epsilon=1e-08, decay=0.0.
Blocks: learning_rate=0.002, beta1=0.9, beta2=0.999, epsilon=1e-08, decay_factor=1.
Lasagne: learning_rate=0.001, beta1=0.9, beta2=0.999, epsilon=1e-08
Caffe: learning_rate=0.001, beta1=0.9, beta2=0.999, epsilon=1e-08
MxNet: learning_rate=0.001, beta1=0.9, beta2=0.999, epsilon=1e-8
Torch: learning_rate=0.001, beta1=0.9, beta2=0.999, epsilon=1e-8

Do you know of any other standard configurations for Adam? Let me know in the comments.

Further Reading

This section lists resources to learn more about the Adam optimization algorithm.

   Adam: A Method for Stochastic Optimization, 2015
   Stochastic gradient descent on Wikipedia
   An overview of gradient descent optimization algorithms, 2016
   ADAM: A Method for Stochastic Optimization (a review)
   Optimization for Deep Networks (slides)
   Adam: A Method for Stochastic Optimization (slides)

Do you know of any other good resources on Adam? Let me know in the comments.

Summary

In this post, you discovered the Adam optimization algorithm for deep learning.

Specifically, you learned:

• Adam is a replacement optimization algorithm for stochastic gradient descent for training deep learning models.
• Adam combines the best properties of the AdaGrad and RMSProp algorithms to provide an optimization algorithm that can handle sparse gradients on noisy problems.
• Adam is relatively easy to configure where the default configuration parameters do well on most problems.

Referensi

• https://machinelearningmastery.com/adam-optimization-algorithm-for-deep-learning/

Pranala Menarik

• Keras
• Python