Ipref

From OnnoWiki
Revision as of 06:43, 4 June 2015 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

I use iperf. It's a client server arrangement in that you run it in server mode at one end and connect to its from another computer on the other side of the network.

One both machines run:

sudo apt-get install iperf

Then on Computer A:

iperf -s

And on Computer B:

iperf -c <address of Computer A>

On the client machine, you'll see something like this:

oli@bert:~$ iperf -c tim
------------------------------------------------------------
Client connecting to tim, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.0.4 port 37248 connected with 192.168.0.5 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  1.04 GBytes    893 Mbits/sec

Of course, if you're running a firewall on the server machine, you'll need to allow connections on port 5001 or change the port with the -p flag.


Referensi