Difference between revisions of "Ipref"

From OnnoWiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
I use iperf. It's a client server arrangement in that you run it in server mode at one end and connect to its from another computer on the other side of the network.
+
Topologi:
 +
* Sebuah Server (misalnya 192.168.0.100)
 +
* Sebuah Client (misalnya 192.168.0.101)
 +
* tersambung melalui jaringan
 +
* Firewall terbuka untuk port 5001
  
One both machines run:
+
 
 +
Pada kedua mesin, install iperf
  
 
  sudo apt-get install iperf
 
  sudo apt-get install iperf
  
Then on Computer A:
+
 
 +
==Di Sisi Server==
 +
 
 +
Pada Server:
  
 
  iperf -s
 
  iperf -s
  
And on Computer B:
+
Akan keluar
  
  iperf -c <address of Computer A>
+
  ------------------------------------------------------------
 +
Server listening on TCP port 5001
 +
TCP window size: 85.3 KByte (default)
 +
------------------------------------------------------------
  
On the client machine, you'll see something like this:
 
  
  oli@bert:~$ iperf -c tim
+
==Di Sisi Client==
 +
 
 +
dan pada Client:
 +
 
 +
iperf -c <address dari server>
 +
 
 +
  iperf -c 192.168.0.100 (dalam hal ini)
 +
 
 +
Anda akan melihat (kira-kira),
 +
 
 
  ------------------------------------------------------------
 
  ------------------------------------------------------------
  Client connecting to tim, TCP port 5001
+
  Client connecting to 192.168.0.100, TCP port 5001
  TCP window size: 16.0 KByte (default)
+
  TCP window size: 85.0 KByte (default)
 
  ------------------------------------------------------------
 
  ------------------------------------------------------------
  [  3] local 192.168.0.4 port 37248 connected with 192.168.0.5 port 5001
+
  [  3] local 192.168.0.101 port 39467 connected with 192.168.0.100 port 5001
 
  [ ID] Interval      Transfer    Bandwidth
 
  [ ID] Interval      Transfer    Bandwidth
  [  3]  0.0-10.0 sec  1.04 GBytes   893 Mbits/sec
+
  [  3]  0.0-10.0 sec  1.48 GBytes 1.27 Gbits/sec
 +
 
  
Of course, if you're running a firewall on the server machine, you'll need to allow connections on port 5001 or change the port with the -p flag.
+
Jika port 5001 terkena firewall, kita dapat mengubahnya melalui -p flag.
  
  
Line 30: Line 50:
 
==Referensi==
 
==Referensi==
  
 +
* https://www.linode.com/docs/networking/diagnostics/install-iperf-to-diagnose-network-speed-in-linux/
 
* http://askubuntu.com/questions/7976/how-do-you-test-the-network-speed-betwen-two-boxes
 
* http://askubuntu.com/questions/7976/how-do-you-test-the-network-speed-betwen-two-boxes

Latest revision as of 07:24, 17 December 2022

Topologi:

  • Sebuah Server (misalnya 192.168.0.100)
  • Sebuah Client (misalnya 192.168.0.101)
  • tersambung melalui jaringan
  • Firewall terbuka untuk port 5001


Pada kedua mesin, install iperf

sudo apt-get install iperf


Di Sisi Server

Pada Server:

iperf -s

Akan keluar

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------


Di Sisi Client

dan pada Client:

iperf -c <address dari server>
iperf -c 192.168.0.100 (dalam hal ini)

Anda akan melihat (kira-kira),

------------------------------------------------------------
Client connecting to 192.168.0.100, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.0.101 port 39467 connected with 192.168.0.100 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec  1.48 GBytes  1.27 Gbits/sec


Jika port 5001 terkena firewall, kita dapat mengubahnya melalui -p flag.


Referensi