Difference between revisions of "Instalasi USB Modem Hwawei E220 di Linux Ubuntu"
Onnowpurbo (talk | contribs) (New page: Pastikan SIM Card yang digunakan tidak ada PIN-nya. Kalau ada PIN, tolong dibuang, karena PIN akan membuat pusing proses instalasi di Linux. Pada saat USB Modem E220 di pasang biasa akan ...) |
Onnowpurbo (talk | contribs) |
||
| Line 70: | Line 70: | ||
[Dialer indosat3g] | [Dialer indosat3g] | ||
| − | Phone = *99 | + | Modem = /dev/ttyUSB0 |
| + | Baud = 3600000 | ||
| + | Init1 = ATZ | ||
| + | Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 | ||
| + | Init3 = AT+CGDCONT=1,"IP","indosat3g" | ||
| + | Area Code = | ||
| + | Phone = *99# | ||
Username = | Username = | ||
Password = | Password = | ||
| + | Ask Password = 0 | ||
| + | Dial Command = ATDT | ||
Stupid Mode = 1 | Stupid Mode = 1 | ||
| − | + | Compuserve = 0 | |
| − | + | Force Address = | |
| − | + | Idle Seconds = 0 | |
| − | + | DialMessage1 = | |
| − | + | DialMessage2 = | |
ISDN = 0 | ISDN = 0 | ||
| − | + | Auto DNS = 1 | |
| − | |||
| − | |||
Dial menggunakan | Dial menggunakan | ||
Revision as of 10:27, 20 March 2008
Pastikan SIM Card yang digunakan tidak ada PIN-nya. Kalau ada PIN, tolong dibuang, karena PIN akan membuat pusing proses instalasi di Linux.
Pada saat USB Modem E220 di pasang biasa akan muncul beberapa hal
- CDROM baru, ini harus dibuang karena akan mengganggu komunikasi.
- Device baru /dev/ttyUSB0, device ini yang akan digunakan untuk komunikasi.
Yang perlu dilakukan,
Masuk ke root
$ sudo su -
Lihat apakah USB Storage Device terdeteksi
# lsmod | grep usb_storage
Buang USB Storage Device tersebut
# rmmod usb-storage
Anda dapat membuang juga usb-serial jika diinginkan, tapi ini tidak fatal,
# rmmod usb-serial
Cek keberadaan USB Modem E220 menggunakan perintah
# lsusb
Jika E220 terpasang di USB, akan muncul kira-kira message
Bus 001 Device 003: ID 12d1:1003
Perhatikan ID12d1:1003 adalah Modem USB E220.
Lakukan insert modul menggunakan perintah
# modprobe usbserial vendor=0x12d1 product=0x1003
Cabut USB Modem E220, tunggu beberapa saat s/d 10-20 detik, dan masukan kembali ke PC.
Setelah di masukan kembali ke PC, lihat Device USB Modem melalui perintah,
# ls -la /dev/ttyU*
Harusnya muncul device /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 0 2008-03-20 08:15 /dev/ttyUSB0
Siapkan file /etc/wvdial.conf agar dapat menelepon ke provider, bunyinya kira-kira
INDOSAT3G
[Dialer Defaults] Phone = Username = Password = New PPPD = yes
[Dialer indosat3g] Modem = /dev/ttyUSB0 Baud = 3600000 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 Init3 = AT+CGDCONT=1,"IP","indosat3g" Area Code = Phone = *99# Username = Password = Ask Password = 0 Dial Command = ATDT Stupid Mode = 1 Compuserve = 0 Force Address = Idle Seconds = 0 DialMessage1 = DialMessage2 = ISDN = 0 Auto DNS = 1
Dial menggunakan
# wvdial indosat3g
XL3G
[Dialer Defaults] Phone = Username = Password = New PPPD = yes
[Dialer xl3g] Phone = *99***1# Username = xlgprs Password = proxl Stupid Mode = 1 Dial Command = ATDT Modem = /dev/ttyUSB0 Baud = 460800 Init2 = ATZ Init3 = ATE0V1&D2&C1S0=0+IFC=2,2 ISDN = 0 Modem Type = Analog Modem Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net";
Dial menggunakan
# wvdial xl3g