IPv6: Static Tunnel

Tool yang digunakan

• GNS3
• 3 Router Mikrotik
• 2 Linux

Sambungan

• R1 e0 -> R2 e0
• R1 e1 -> R3 e0
• R2 e1 -> linux
• R3 e1 -> linux

Aktifkan IPv6

R1

/system package enable ipv6
/system reset-configuration no-defaults=yes 

R2

/system package enable ipv6
/system reset-configuration no-defaults=yes 

R3

/system package enable ipv6
/system reset-configuration no-defaults=yes 

Set IPv6 address

R1

/ip address add address=12.12.12.1/24 interface=ether1
/ip address add address=13.13.13.1/24 interface=ether2

R2

/ip address add address=12.12.12.2/24 interface=ether1 
/ipv6 address add address=2001:1:2:3::1/64 interface=ether2

R3

/ip address add address=13.13.13.3/24 interface=ether1 
/ipv6 address add address=2001:4:5:6::1/64 interface=ether2

check

ping

Aktifkan OSPF di R1, R2, R3 agar IPv4 bisa komunikasi

R1

routing ospf network add network=12.12.12.0/24 area=backbone
routing ospf network add network=13.13.13.0/24 area=backbone

R2

routing ospf network add network=12.12.12.0/24 area=backbone

R3

routing ospf network add network=13.13.13.0/24 area=backbone

Buat tunnel antara R2 dan R3

R2

interface gre add name=tunnel0 remote-address=13.13.13.3 local-address=12.12.12.2

R3

interface gre add name=tunnel0 remote-address=12.12.12.2 local-address=13.13.13.3

Aktifkan IPv6 OSPF pada tunnel

R2

routing ospf-v3 instance set default router-id=2.2.2.2
routing ospf-v3 interface add interface=tunnel0 area=backbone
routing ospf-v3 interface add interface=ether2 area=backbone

R3

routing ospf-v3 instance set default router-id=3.3.3.3
routing ospf-v3 interface add interface=tunnel0 area=backbone
routing ospf-v3 interface add interface=ether2 area=backbone

Cek

ping 2001:1:2:3::1

Setup di Linux

• Set IPv6 manual bukan automatis
• Linux yang terhubung R2 gunakan IPv6 2001:1:2:3::100/64
• Linux yang terhubung R3 gunakan IPv6 2001:4:5:6::100/64
• ping ke IPv6 lawan