Difference between revisions of "IPv6: Cisco: OSPF Sederhana"

From OnnoWiki
Jump to navigation Jump to search
Line 116: Line 116:
 
   network 10.10.1.0 0.0.0.3 area 0.0.0.0
 
   network 10.10.1.0 0.0.0.3 area 0.0.0.0
 
   network 10.10.1.4 0.0.0.3 area 0.0.0.0
 
   network 10.10.1.4 0.0.0.3 area 0.0.0.0
   ipv6 router ospf 1 router-id 10.10.1.1 area 0.0.0.0 range
+
   ipv6 router ospf 1
 +
    router-id 10.10.1.1
 +
    area 0.0.0.0 range 2001:10:10:1::/64
 +
    area 0.0.0.0 range 2001:10:10:5::/64
 
   end
 
   end
 
  
 
R2
 
R2
Line 131: Line 133:
 
   network 172.16.0.0 0.0.255.255 area 0.0.0.0
 
   network 172.16.0.0 0.0.255.255 area 0.0.0.0
 
   ipv6 router ospf 2
 
   ipv6 router ospf 2
     router-id 10.10.1.5 area 0.0.0.0
+
     router-id 10.10.1.5
 +
    area 0.0.0.0 range 2001:10:10:5::/64
 +
    area 0.0.0.0 range 2001:10:10:9::/64
 +
    area 0.0.0.0 range 2001:172:16:1::/64
 
   end
 
   end
  
Line 145: Line 150:
 
   network 192.168.1.0 0.0.0.255 area 0.0.0.0
 
   network 192.168.1.0 0.0.0.255 area 0.0.0.0
 
   ipv6 router ospf 3
 
   ipv6 router ospf 3
     router-id 10.10.1.2 area 0.0.0.0
+
     router-id 10.10.1.2
 +
    area 0.0.0.0 range 2001:10:10:1::/64
 +
    area 0.0.0.0 range 2001:10:10:9::/64
 +
    area 0.0.0.0 range 2001:192:168:1::/64
 
   end
 
   end
  

Revision as of 19:47, 6 January 2019

Image6005.gif

Topologi

R1

e1 -- R3: e1
e2 -- R2: e1
e3 -- NAT: Internet

R2

e1 -- R2: e1
e2 -- R3: e2
e3 -- LAN 172.16.1.1

R3

e1 -- R1: e1
e2 -- R2: e2
e3 -- LAN 192.168.1.1


Konfigurasi

Router1:

enable
configure terminal
  ipv6 unicast-routing
  interface ethernet1/1
    ip address 10.10.1.1 255.255.255.252
    ipv6 address 2001:10:10:1::1/64
    ipv6 ospf 1 area 0.0.0.0
    no shutdown
    exit
  interface ethernet1/2
    ip address 10.10.1.5 255.255.255.252
    ipv6 address 2001:10:10:5::1/64
    ipv6 ospf 1 area 0.0.0.0
    no shutdown
    exit
  !
  ! NAT GNS3 gw 192.168.122.1
  interface ethernet1/3
    ip address 192.168.122.100 255.255.255.0
    ip address 192.168.122.101 255.255.255.0 secondary
    ip address 192.168.122.102 255.255.255.0 secondary
    no shutdown
    ip route 0.0.0.0 0.0.0.0 192.168.122.1
  end

Router2:

enable
configure terminal
  ipv6 unicast-routing
  interface ethernet1/1
    ip address 10.10.1.6 255.255.255.252
    ipv6 address 2001:10:10:5::2/64
    ipv6 ospf 2 area 0.0.0.0
    no shutdown
    exit
  interface ethernet1/2
    ip address 10.10.1.9 255.255.255.252
    ipv6 address 2001:10:10:9::1/64
    ipv6 ospf 2 area 0.0.0.0
    no shutdown
    exit
  interface ethernet1/3
    ip address 172.16.1.1 255.255.0.0
    ipv6 address 2001:172:16:1::1/64
    ipv6 ospf 2 area 0.0.0.0
    no shutdown
    end

Router3:

enable
configure terminal
  ipv6 unicast-routing
  interface ethernet1/1
    ip address 10.10.1.2 255.255.255.252
    ipv6 address 2001:10:10:1::2/64
    ipv6 ospf 3 area 0.0.0.0
    no shutdown
    exit
  interface ethernet1/2
    ip address 10.10.1.10 255.255.255.252
    ipv6 address 2001:10:10:9::2/64
    ipv6 ospf 3 area 0.0.0.0
    no shutdown
    exit
  interface ethernet1/3
    ip address 192.168.1.1 255.255.255.0
    ipv6 address 2001:192:168:1::1/64
    ipv6 ospf 3 area 0.0.0.0
    no shutdown
    end

Ada tiga (3) elemen dasar konfigurasi OSPF:

  • Enable OSPF instance
  • OSPF area configuration
  • OSPF network configuration


Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.

R1

enable
configure terminal
  !
  ! area 0 = backbone
  router ospf 1
  network 10.10.1.0 0.0.0.3 area 0.0.0.0
  network 10.10.1.4 0.0.0.3 area 0.0.0.0
  ipv6 router ospf 1
    router-id 10.10.1.1
    area 0.0.0.0 range 2001:10:10:1::/64
    area 0.0.0.0 range 2001:10:10:5::/64
  end

R2

enable
configure terminal
  !
  ! area 0 = backbone
  router ospf 2
  network 10.10.1.4 0.0.0.3 area 0.0.0.0
  network 10.10.1.8 0.0.0.3 area 0.0.0.0
  network 172.16.0.0 0.0.255.255 area 0.0.0.0
  ipv6 router ospf 2
    router-id 10.10.1.5
    area 0.0.0.0 range 2001:10:10:5::/64
    area 0.0.0.0 range 2001:10:10:9::/64
    area 0.0.0.0 range 2001:172:16:1::/64
  end

R3

enable
configure terminal
  !
  ! area 0 = backbone
  router ospf 3
  network 10.10.1.0 0.0.0.3 area 0.0.0.0
  network 10.10.1.8 0.0.0.3 area 0.0.0.0
  network 192.168.1.0 0.0.0.255 area 0.0.0.0
  ipv6 router ospf 3
    router-id 10.10.1.2
    area 0.0.0.0 range 2001:10:10:1::/64
    area 0.0.0.0 range 2001:10:10:9::/64
    area 0.0.0.0 range 2001:192:168:1::/64
  end

Verify

Cek di R1, R2, R3

show ip ospf neighbor
show ip ospf database 
show ip route


Referensi

Pranala Menarik