GNS3: Menambahkan Image Ubuntu Server di VirtualBox

From OnnoWiki
Revision as of 07:55, 24 July 2015 by Onnowpurbo (talk | contribs) (New page: Kita perlu mempersiapkan OpenWRT x86 dalam VirtualBox agar nantinya dapat menggunakan router openwrt untuk GNS3. Cara yang perlu dilakukan minimal adalah: * Jalankan VirtualBox * New * t...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Kita perlu mempersiapkan OpenWRT x86 dalam VirtualBox agar nantinya dapat menggunakan router openwrt untuk GNS3.

Cara yang perlu dilakukan minimal adalah:

  • Jalankan VirtualBox
  • New
  • type > Linux > Other 32bit > Name: OpenWRT-Router (misalnya) > Next
  • Create a virtual hard drive now > Create > (VDI) VirtualBox Disk Image > Next
  • File allocation and size > 100MB > Create

Setting

  • Settings > System > Boot order (buang Floppy)
  • Settings > Network > Adapter 1 > Enable Network Adapter > Attached to: Bridge Adapter > Advanced > Promiscuous Mode > Allow All.
  • Settings > Network > Adapter 2 > Enable Network Adapter > Attached to: Bridge Adapter > Advanced > Promiscuous Mode > Allow All.
  • Settings > Network > Adapter 3 > Enable Network Adapter > Attached to: Bridge Adapter > Advanced > Promiscuous Mode > Allow All.
  • Settings > Network > Adapter 4 > Enable Network Adapter > Attached to: Bridge Adapter > Advanced > Promiscuous Mode > Allow All > OK


Load OS

  • Masuk ke menu VirtualBox
  • Klik Mesin Virtual yang baru kita buat > Start
  • Klik Start
  • Jika di tanya boot CDROM > Klik OpenWRT-x86.iso file
  • Tekan ENTER > kita akan masuk ke console openwrt.


Shutdown OpenWRT

  • Di console OpenWRT
  • Ketik "halt"


Cara membuat file openwrt-x86.iso di terangkan di


Pranala Menarik