Difference between revisions of "ESP32: WiFi UDP analogRead"

From OnnoWiki
Jump to navigation Jump to search
(Created page with "==ESP32== #include <WiFi.h> #include <WiFiUdp.h> →‎WiFi network name and password: const char * ssid = "HUAWEI-1A73"; const char * pwd = "52408495"; // IP addres...")
 
Line 1: Line 1:
==ESP32==
 
 
 
  #include <WiFi.h>
 
  #include <WiFi.h>
 
  #include <WiFiUdp.h>
 
  #include <WiFiUdp.h>

Revision as of 19:14, 5 November 2019

#include <WiFi.h>
#include <WiFiUdp.h>

/* WiFi network name and password */
const char * ssid = "HUAWEI-1A73";
const char * pwd = "52408495";

// IP address to send UDP data to.
// it can be ip address of the server or 
// a network broadcast address
// here is broadcast address
const char * udpAddress = "192.168.8.100";
const int udpPort = 44444;

//create UDP instance
WiFiUDP udp;

void setup(){
  Serial.begin(115200);
  
  //Connect to the WiFi network
   WiFi.begin(ssid, pwd);
  Serial.println(""); 

  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());
  //This initializes udp and transfer buffer
  udp.begin(udpPort);
} 

void loop(){
  //send hello world to server 
  udp.beginPacket(udpAddress, udpPort);
  int sensorReading = analogRead(15);
  Serial.println(sensorReading);
  udp.write(sensorReading);
  udp.write('\n");
  udp.endPacket();
  delay(1000);
}