Difference between revisions of "Docker: Instalasi di Ubuntu 22.04"

From OnnoWiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
  sudo apt update
 
  sudo apt update
 
  sudo apt upgrade
 
  sudo apt upgrade
  sudo apt install apt-transport-https ca-certificates curl software-properties-common
+
  sudo apt -y install apt-transport-https ca-certificates curl software-properties-common
  
 
Add GPG Key Docker Repo & Sources List
 
Add GPG Key Docker Repo & Sources List
Line 151: Line 151:
 
To check whether you can access and download images from Docker Hub, type:
 
To check whether you can access and download images from Docker Hub, type:
  
docker run hello-world
+
docker run hello-world
 +
 
 
The output will indicate that Docker in working correctly:
 
The output will indicate that Docker in working correctly:
  
Output
+
Output
Unable to find image 'hello-world:latest' locally
+
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
+
latest: Pulling from library/hello-world
2db29710123e: Pull complete
+
2db29710123e: Pull complete
Digest: sha256:bfea6278a0a267fad2634554f4f0c6f31981eea41c553fdf5a83e95a41d40c38
+
Digest: sha256:bfea6278a0a267fad2634554f4f0c6f31981eea41c553fdf5a83e95a41d40c38
Status: Downloaded newer image for hello-world:latest
+
Status: Downloaded newer image for hello-world:latest
 +
 
 +
Hello from Docker!
  
Hello from Docker!
 
 
This message shows that your installation appears to be working correctly.
 
This message shows that your installation appears to be working correctly.
  
Line 170: Line 172:
 
You can search for images available on Docker Hub by using the docker command with the search subcommand. For example, to search for the Ubuntu image, type:
 
You can search for images available on Docker Hub by using the docker command with the search subcommand. For example, to search for the Ubuntu image, type:
  
docker search ubuntu
+
docker search ubuntu
 +
 
 
The script will crawl Docker Hub and return a listing of all images whose name matches the search string. In this case, the output will be similar to this:
 
The script will crawl Docker Hub and return a listing of all images whose name matches the search string. In this case, the output will be similar to this:
  
Output
+
Output
NAME                            DESCRIPTION                                    STARS    OFFICIAL  AUTOMATED
+
NAME                            DESCRIPTION                                    STARS    OFFICIAL   
ubuntu                          Ubuntu is a Debian-based Linux operating sys…  14048    [OK]
+
AUTOMATED
websphere-liberty                WebSphere Liberty multi-architecture images …  283      [OK]
+
ubuntu                          Ubuntu is a Debian-based Linux operating sys…  14048    [OK]
ubuntu-upstart                  DEPRECATED, as is Upstart (find other proces…  112      [OK]
+
websphere-liberty                WebSphere Liberty multi-architecture images …  283      [OK]
neurodebian                      NeuroDebian provides neuroscience research s…  88        [OK]
+
ubuntu-upstart                  DEPRECATED, as is Upstart (find other proces…  112      [OK]
open-liberty                    Open Liberty multi-architecture images based…  51        [OK]
+
neurodebian                      NeuroDebian provides neuroscience research s…  88        [OK]
...
+
open-liberty                    Open Liberty multi-architecture images based…  51        [OK]
 +
...
  
 
In the OFFICIAL column, OK indicates an image built and supported by the company behind the project. Once you’ve identified the image that you would like to use, you can download it to your computer using the pull subcommand.
 
In the OFFICIAL column, OK indicates an image built and supported by the company behind the project. Once you’ve identified the image that you would like to use, you can download it to your computer using the pull subcommand.
Line 186: Line 190:
 
Execute the following command to download the official ubuntu image to your computer:
 
Execute the following command to download the official ubuntu image to your computer:
  
docker pull ubuntu
+
docker pull ubuntu
 +
 
 
You’ll see the following output:
 
You’ll see the following output:
  
Output
+
Output
Using default tag: latest
+
Using default tag: latest
latest: Pulling from library/ubuntu
+
latest: Pulling from library/ubuntu
e0b25ef51634: Pull complete
+
e0b25ef51634: Pull complete
Digest: sha256:9101220a875cee98b016668342c489ff0674f247f6ca20dfc91b91c0f28581ae
+
Digest: sha256:9101220a875cee98b016668342c489ff0674f247f6ca20dfc91b91c0f28581ae
Status: Downloaded newer image for ubuntu:latest
+
Status: Downloaded newer image for ubuntu:latest
docker.io/library/ubuntu:latest
+
docker.io/library/ubuntu:latest
 +
 
 
After an image has been downloaded, you can then run a container using the downloaded image with the run subcommand. As you saw with the hello-world example, if an image has not been downloaded when docker is executed with the run subcommand, the Docker client will first download the image, then run a container using it.
 
After an image has been downloaded, you can then run a container using the downloaded image with the run subcommand. As you saw with the hello-world example, if an image has not been downloaded when docker is executed with the run subcommand, the Docker client will first download the image, then run a container using it.
  
 
To see the images that have been downloaded to your computer, type:
 
To see the images that have been downloaded to your computer, type:
  
docker images
+
docker images
 +
 
 
The output will look similar to the following:
 
The output will look similar to the following:
  
Output
+
Output
REPOSITORY          TAG                IMAGE ID            CREATED            SIZE
+
REPOSITORY          TAG                IMAGE ID            CREATED            SIZE
ubuntu              latest              1d622ef86b13        3 weeks ago        73.9MB
+
ubuntu              latest              1d622ef86b13        3 weeks ago        73.9MB
hello-world        latest              bf756fb1ae65        4 months ago        13.3kB
+
hello-world        latest              bf756fb1ae65        4 months ago        13.3kB
 +
 
 
As you’ll see later in this tutorial, images that you use to run containers can be modified and used to generate new images, which may then be uploaded (pushed is the technical term) to Docker Hub or other Docker registries.
 
As you’ll see later in this tutorial, images that you use to run containers can be modified and used to generate new images, which may then be uploaded (pushed is the technical term) to Docker Hub or other Docker registries.
  
Line 246: Line 254:
 
After using Docker for a while, you’ll have many active (running) and inactive containers on your computer. To view the active ones, use:
 
After using Docker for a while, you’ll have many active (running) and inactive containers on your computer. To view the active ones, use:
  
docker ps
+
docker ps
 +
 
 
You will see output similar to the following:
 
You will see output similar to the following:
  
Output
+
Output
CONTAINER ID        IMAGE              COMMAND            CREATED
+
CONTAINER ID        IMAGE              COMMAND            CREATED
  
 
In this tutorial, you started two containers; one from the hello-world image and another from the ubuntu image. Both containers are no longer running, but they still exist on your system.
 
In this tutorial, you started two containers; one from the hello-world image and another from the ubuntu image. Both containers are no longer running, but they still exist on your system.
Line 256: Line 265:
 
To view all containers — active and inactive, run docker ps with the -a switch:
 
To view all containers — active and inactive, run docker ps with the -a switch:
  
docker ps -a
+
docker ps -a
 +
 
 
You’ll see output similar to this:
 
You’ll see output similar to this:
  
Output
+
Output
CONTAINER ID  IMAGE        COMMAND  CREATED        STATUS                    PORTS    NAMES
+
CONTAINER ID  IMAGE        COMMAND  CREATED        STATUS                    PORTS    NAMES
1c08a7a0d0e4  ubuntu        "bash"    About a minute ago  Exited (0) 7 seconds ago            dazzling_taussig
+
1c08a7a0d0e4  ubuntu        "bash"    About a minute ago  Exited (0) 7 seconds ago            dazzling_taussig
587000e49d53  hello-world  "/hello"  5 minutes ago        Exited (0) 5 minutes ago            adoring_kowalevski
+
587000e49d53  hello-world  "/hello"  5 minutes ago        Exited (0) 5 minutes ago            adoring_kowalevski
 +
 
 
To view the latest container you created, pass it the -l switch:
 
To view the latest container you created, pass it the -l switch:
  
docker ps -l
+
docker ps -l
Output
+
 
CONTAINER ID  IMAGE    COMMAND  CREATED        STATUS                    PORTS    NAMES
+
Output
1c08a7a0d0e4  ubuntu    "bash"    3 minutes ago  Exited (0) 2 minutes ago            dazzling_taussig
+
CONTAINER ID  IMAGE    COMMAND  CREATED        STATUS                    PORTS    NAMES
 +
1c08a7a0d0e4  ubuntu    "bash"    3 minutes ago  Exited (0) 2 minutes ago            dazzling_taussig
 +
 
 
To start a stopped container, use docker start, followed by the container ID or the container’s name. Let’s start the Ubuntu-based container with the ID of 1c08a7a0d0e4:
 
To start a stopped container, use docker start, followed by the container ID or the container’s name. Let’s start the Ubuntu-based container with the ID of 1c08a7a0d0e4:
  
docker start 1c08a7a0d0e4
+
docker start 1c08a7a0d0e4
 +
 
 
The container will start, and you can use docker ps to see its status:
 
The container will start, and you can use docker ps to see its status:
  
Output
+
Output
CONTAINER ID  IMAGE    COMMAND  CREATED        STATUS        PORTS    NAMES
+
CONTAINER ID  IMAGE    COMMAND  CREATED        STATUS        PORTS    NAMES
1c08a7a0d0e4  ubuntu    "bash"    6 minutes ago  Up 8 seconds            dazzling_taussig
+
1c08a7a0d0e4  ubuntu    "bash"    6 minutes ago  Up 8 seconds            dazzling_taussig
 +
 
 
To stop a running container, use docker stop, followed by the container ID or name. This time, we’ll use the name that Docker assigned the container, which is dazzling_taussig:
 
To stop a running container, use docker stop, followed by the container ID or name. This time, we’ll use the name that Docker assigned the container, which is dazzling_taussig:
  
docker stop dazzling_taussig
+
docker stop dazzling_taussig
 +
 
 
Once you’ve decided you no longer need a container anymore, remove it with the docker rm command, again using either the container ID or the name. Use the docker ps -a command to find the container ID or name for the container associated with the hello-world image and remove it.
 
Once you’ve decided you no longer need a container anymore, remove it with the docker rm command, again using either the container ID or the name. Use the docker ps -a command to find the container ID or name for the container associated with the hello-world image and remove it.
  
docker rm adoring_kowalevski
+
docker rm adoring_kowalevski
 +
 
 
You can start a new container and give it a name using the --name switch. You can also use the --rm switch to create a container that removes itself when it’s stopped. See the docker run help command for more information on these options and others.
 
You can start a new container and give it a name using the --name switch. You can also use the --rm switch to create a container that removes itself when it’s stopped. See the docker run help command for more information on these options and others.
  
Line 301: Line 318:
 
For example, for the user sammy, with the container ID of d9b100f2f636, the command would be:
 
For example, for the user sammy, with the container ID of d9b100f2f636, the command would be:
  
docker commit -m "added Node.js" -a "sammy" d9b100f2f636 sammy/ubuntu-nodejs
+
docker commit -m "added Node.js" -a "sammy" d9b100f2f636 sammy/ubuntu-nodejs
 +
 
 
When you commit an image, the new image is saved locally on your computer. Later in this tutorial, you’ll learn how to push an image to a Docker registry like Docker Hub so others can access it.
 
When you commit an image, the new image is saved locally on your computer. Later in this tutorial, you’ll learn how to push an image to a Docker registry like Docker Hub so others can access it.
  
 
Listing the Docker images again will show the new image, as well as the old one that it was derived from:
 
Listing the Docker images again will show the new image, as well as the old one that it was derived from:
  
docker images
+
docker images
 +
 
 
You’ll see output like this:
 
You’ll see output like this:
  
Output
+
Output
REPOSITORY              TAG                IMAGE ID            CREATED            SIZE
+
REPOSITORY              TAG                IMAGE ID            CREATED            SIZE
sammy/ubuntu-nodejs  latest              7c1f35226ca6        7 seconds ago      179MB
+
sammy/ubuntu-nodejs  latest              7c1f35226ca6        7 seconds ago      179MB
...
+
...
  
 
In this example, ubuntu-nodejs is the new image, which was derived from the existing ubuntu image from Docker Hub. The size difference reflects the changes that were made. And in this example, the change was that NodeJS was installed. So next time you need to run a container using Ubuntu with NodeJS pre-installed, you can just use the new image.
 
In this example, ubuntu-nodejs is the new image, which was derived from the existing ubuntu image from Docker Hub. The size difference reflects the changes that were made. And in this example, the change was that NodeJS was installed. So next time you need to run a container using Ubuntu with NodeJS pre-installed, you can just use the new image.
Line 325: Line 344:
 
To push your image, first log into Docker Hub.
 
To push your image, first log into Docker Hub.
  
docker login -u docker-registry-username
+
docker login -u docker-registry-username
 +
 
 
You’ll be prompted to authenticate using your Docker Hub password. If you specified the correct password, authentication should succeed.
 
You’ll be prompted to authenticate using your Docker Hub password. If you specified the correct password, authentication should succeed.
  
 
Note: If your Docker registry username is different from the local username you used to create the image, you will have to tag your image with your registry username. For the example given in the last step, you would type:
 
Note: If your Docker registry username is different from the local username you used to create the image, you will have to tag your image with your registry username. For the example given in the last step, you would type:
  
docker tag sammy/ubuntu-nodejs docker-registry-username/ubuntu-nodejs
+
docker tag sammy/ubuntu-nodejs docker-registry-username/ubuntu-nodejs
 +
 
 
Then you may push your own image using:
 
Then you may push your own image using:
  
docker push docker-registry-username/docker-image-name
+
docker push docker-registry-username/docker-image-name
 +
 
 
To push the ubuntu-nodejs image to the sammy repository, the command would be:
 
To push the ubuntu-nodejs image to the sammy repository, the command would be:
  
docker push sammy/ubuntu-nodejs
+
docker push sammy/ubuntu-nodejs
 +
 
 
The process may take some time to complete as it uploads the images, but when completed, the output will look like this:
 
The process may take some time to complete as it uploads the images, but when completed, the output will look like this:
  
Output
+
Output
The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
+
  The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
e3fbbfb44187: Pushed
+
e3fbbfb44187: Pushed
5f70bf18a086: Pushed
+
5f70bf18a086: Pushed
a3b5c80a4eba: Pushed
+
a3b5c80a4eba: Pushed
7f18b442972b: Pushed
+
7f18b442972b: Pushed
3ce512daaf78: Pushed
+
3ce512daaf78: Pushed
7aae4540b42d: Pushed
+
7aae4540b42d: Pushed
 
+
...
+
...
  
  
Line 357: Line 380:
 
If a push attempt results in an error of this sort, then you likely did not log in:
 
If a push attempt results in an error of this sort, then you likely did not log in:
  
Output
+
Output
The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
+
The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
e3fbbfb44187: Preparing
+
e3fbbfb44187: Preparing
5f70bf18a086: Preparing
+
5f70bf18a086: Preparing
a3b5c80a4eba: Preparing
+
a3b5c80a4eba: Preparing
7f18b442972b: Preparing
+
7f18b442972b: Preparing
3ce512daaf78: Preparing
+
3ce512daaf78: Preparing
7aae4540b42d: Waiting
+
7aae4540b42d: Waiting
unauthorized: authentication required
+
unauthorized: authentication required
 +
 
 
Log in with docker login and repeat the push attempt. Then verify that it exists on your Docker Hub repository page.
 
Log in with docker login and repeat the push attempt. Then verify that it exists on your Docker Hub repository page.
  
 
You can now use docker pull sammy/ubuntu-nodejs to pull the image to a new machine and use it to run a new container.
 
You can now use docker pull sammy/ubuntu-nodejs to pull the image to a new machine and use it to run a new container.
 
 
  
 
==Referensi==
 
==Referensi==
  
 
* https://www.digitalocean.com/community/tutorials/how-to-install-and-use-docker-on-ubuntu-22-04
 
* https://www.digitalocean.com/community/tutorials/how-to-install-and-use-docker-on-ubuntu-22-04

Latest revision as of 19:06, 10 September 2023

Sumber: https://www.digitalocean.com/community/tutorials/how-to-install-and-use-docker-on-ubuntu-22-04


Step 1 Install Docker

sudo apt update
sudo apt upgrade
sudo apt -y install apt-transport-https ca-certificates curl software-properties-common

Add GPG Key Docker Repo & Sources List

curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
sudo apt update

Pastikan instal dari docker repo bukan ubuntu repo

sudo apt -y install docker-ce docker-compose
apt-cache policy docker-ce

Output

docker-ce:
  Installed: 5:24.0.2-1~ubuntu.22.04~jammy
  Candidate: 5:24.0.2-1~ubuntu.22.04~jammy
  Version table:
  ...


Cek status

sudo systemctl status docker

Output

● docker.service - Docker Application Container Engine
     Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2023-07-03 06:52:31 UTC; 1min 13s ago
TriggeredBy: ● docker.socket
       Docs: https://docs.docker.com
   Main PID: 4145 (dockerd)
      Tasks: 10
     Memory: 27.1M
        CPU: 791ms
     CGroup: /system.slice/docker.service
             └─4145 /usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock

Jul 03 06:52:23 server2204 systemd[1]: Starting Docker Application Container Engine...
Jul 03 06:52:23 server2204 dockerd[4145]: time="2023-07-03T06:52:23.888013536Z" level=info msg="Starting up"
Jul 03 06:52:23 server2204 dockerd[4145]: time="2023-07-03T06:52:23.889350329Z" level=info msg="detected 127.0.0.53 names>
Jul 03 06:52:26 server2204 dockerd[4145]: time="2023-07-03T06:52:26.571125282Z" level=info msg="Loading containers: start>
Jul 03 06:52:29 server2204 dockerd[4145]: time="2023-07-03T06:52:29.337682161Z" level=info msg="Loading containers: done."
Jul 03 06:52:29 server2204 dockerd[4145]: time="2023-07-03T06:52:29.802304747Z" level=info msg="Docker daemon" commit=659>
Jul 03 06:52:29 server2204 dockerd[4145]: time="2023-07-03T06:52:29.802663028Z" level=info msg="Daemon has completed init>
Jul 03 06:52:31 server2204 dockerd[4145]: time="2023-07-03T06:52:31.321360076Z" level=info msg="API listen on /run/docker>
Jul 03 06:52:31 server2204 systemd[1]: Started Docker Application Container Engine.

Step 2 — Executing the Docker Command Without Sudo (Optional)

By default, the docker command can only be run the root user or by a user in the docker group, which is automatically created during Docker’s installation process. If you attempt to run the docker command without prefixing it with sudo or without being in the docker group, you’ll get an output like this:

Output docker: Cannot connect to the Docker daemon. Is the docker daemon running on this host?. See 'docker run --help'. If you want to avoid typing sudo whenever you run the docker command, add your username to the docker group:

sudo usermod -aG docker ${USER}

To apply the new group membership, log out of the server and back in, or type the following:

su - ${USER}

You will be prompted to enter your user’s password to continue.

Confirm that your user is now added to the docker group by typing:

groups Output sammy sudo docker If you need to add a user to the docker group that you’re not logged in as, declare that username explicitly using:

sudo usermod -aG docker username

The rest of this article assumes you are running the docker command as a user in the docker group. If you choose not to, please prepend the commands with sudo.

Let’s explore the docker command next.

Step 3 — Using the Docker Command

Using docker consists of passing it a chain of options and commands followed by arguments. The syntax takes this form:

docker [option] [command] [arguments]

To view all available subcommands, type:

docker

As of Docker version 20.10.14, the complete list of available subcommands includes:

Output

 attach      Attach local standard input, output, and error streams to a running container
 build       Build an image from a Dockerfile
 commit      Create a new image from a container's changes
 cp          Copy files/folders between a container and the local filesystem
 create      Create a new container
 diff        Inspect changes to files or directories on a container's filesystem
 events      Get real time events from the server
 exec        Run a command in a running container
 export      Export a container's filesystem as a tar archive
 history     Show the history of an image
 images      List images
 import      Import the contents from a tarball to create a filesystem image
 info        Display system-wide information
 inspect     Return low-level information on Docker objects
 kill        Kill one or more running containers
 load        Load an image from a tar archive or STDIN
 login       Log in to a Docker registry
 logout      Log out from a Docker registry
 logs        Fetch the logs of a container
 pause       Pause all processes within one or more containers
 port        List port mappings or a specific mapping for the container
 ps          List containers
 pull        Pull an image or a repository from a registry
 push        Push an image or a repository to a registry
 rename      Rename a container
 restart     Restart one or more containers
 rm          Remove one or more containers
 rmi         Remove one or more images
 run         Run a command in a new container
 save        Save one or more images to a tar archive (streamed to STDOUT by default)
 search      Search the Docker Hub for images
 start       Start one or more stopped containers
 stats       Display a live stream of container(s) resource usage statistics
 stop        Stop one or more running containers
 tag         Create a tag TARGET_IMAGE that refers to SOURCE_IMAGE
 top         Display the running processes of a container
 unpause     Unpause all processes within one or more containers
 update      Update configuration of one or more containers
 version     Show the Docker version information
 wait        Block until one or more containers stop, then print their exit codes

To view the options available to a specific command, type:

docker docker-subcommand --help

To view system-wide information about Docker, use:

docker info

Let’s explore some of these commands. We’ll start by working with images.

Step 4 — Working with Docker Images

Docker containers are built from Docker images. By default, Docker pulls these images from Docker Hub, a Docker registry managed by Docker, the company behind the Docker project. Anyone can host their Docker images on Docker Hub, so most applications and Linux distributions you’ll need will have images hosted there.

To check whether you can access and download images from Docker Hub, type:

docker run hello-world

The output will indicate that Docker in working correctly:

Output
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
2db29710123e: Pull complete
Digest: sha256:bfea6278a0a267fad2634554f4f0c6f31981eea41c553fdf5a83e95a41d40c38
Status: Downloaded newer image for hello-world:latest
Hello from Docker!

This message shows that your installation appears to be working correctly.

...

Docker was initially unable to find the hello-world image locally, so it downloaded the image from Docker Hub, which is the default repository. Once the image downloaded, Docker created a container from the image and the application within the container executed, displaying the message.

You can search for images available on Docker Hub by using the docker command with the search subcommand. For example, to search for the Ubuntu image, type:

docker search ubuntu

The script will crawl Docker Hub and return a listing of all images whose name matches the search string. In this case, the output will be similar to this:

Output
NAME                             DESCRIPTION                                     STARS     OFFICIAL   
AUTOMATED
ubuntu                           Ubuntu is a Debian-based Linux operating sys…   14048     [OK]
websphere-liberty                WebSphere Liberty multi-architecture images …   283       [OK]
ubuntu-upstart                   DEPRECATED, as is Upstart (find other proces…   112       [OK]
neurodebian                      NeuroDebian provides neuroscience research s…   88        [OK]
open-liberty                     Open Liberty multi-architecture images based…   51        [OK]
...

In the OFFICIAL column, OK indicates an image built and supported by the company behind the project. Once you’ve identified the image that you would like to use, you can download it to your computer using the pull subcommand.

Execute the following command to download the official ubuntu image to your computer:

docker pull ubuntu

You’ll see the following output:

Output
Using default tag: latest
latest: Pulling from library/ubuntu
e0b25ef51634: Pull complete
Digest: sha256:9101220a875cee98b016668342c489ff0674f247f6ca20dfc91b91c0f28581ae
Status: Downloaded newer image for ubuntu:latest
docker.io/library/ubuntu:latest

After an image has been downloaded, you can then run a container using the downloaded image with the run subcommand. As you saw with the hello-world example, if an image has not been downloaded when docker is executed with the run subcommand, the Docker client will first download the image, then run a container using it.

To see the images that have been downloaded to your computer, type:

docker images

The output will look similar to the following:

Output
REPOSITORY          TAG                 IMAGE ID            CREATED             SIZE
ubuntu              latest              1d622ef86b13        3 weeks ago         73.9MB
hello-world         latest              bf756fb1ae65        4 months ago        13.3kB

As you’ll see later in this tutorial, images that you use to run containers can be modified and used to generate new images, which may then be uploaded (pushed is the technical term) to Docker Hub or other Docker registries.

Let’s look at how to run containers in more detail.

Step 5 — Running a Docker Container

The hello-world container you ran in the previous step is an example of a container that runs and exits after emitting a test message. Containers can be much more useful than that, and they can be interactive. After all, they are similar to virtual machines, only more resource-friendly.

As an example, let’s run a container using the latest image of Ubuntu. The combination of the -i and -t switches gives you interactive shell access into the container:

docker run -it ubuntu

Your command prompt should change to reflect the fact that you’re now working inside the container and should take this form:

Output

root@d9b100f2f636:/#

Note the container id in the command prompt. In this example, it is d9b100f2f636. You’ll need that container ID later to identify the container when you want to remove it.

Now you can run any command inside the container. For example, let’s update the package database inside the container. You don’t need to prefix any command with sudo, because you’re operating inside the container as the root user:

apt update

Then install any application in it. Let’s install Node.js:

apt install nodejs

This installs Node.js in the container from the official Ubuntu repository. When the installation finishes, verify that Node.js is installed:

node -v

You’ll see the version number displayed in your terminal:

Output v12.22.9 Any changes you make inside the container only apply to that container.

To exit the container, type exit at the prompt.

Let’s look at managing the containers on our system next.

Step 6 — Managing Docker Containers

After using Docker for a while, you’ll have many active (running) and inactive containers on your computer. To view the active ones, use:

docker ps

You will see output similar to the following:

Output
CONTAINER ID        IMAGE               COMMAND             CREATED

In this tutorial, you started two containers; one from the hello-world image and another from the ubuntu image. Both containers are no longer running, but they still exist on your system.

To view all containers — active and inactive, run docker ps with the -a switch:

docker ps -a

You’ll see output similar to this:

Output
CONTAINER ID   IMAGE         COMMAND   CREATED         STATUS                     PORTS     NAMES
1c08a7a0d0e4   ubuntu        "bash"     About a minute ago   Exited (0) 7 seconds ago             dazzling_taussig
587000e49d53   hello-world   "/hello"   5 minutes ago        Exited (0) 5 minutes ago             adoring_kowalevski

To view the latest container you created, pass it the -l switch:

docker ps -l
Output
CONTAINER ID   IMAGE     COMMAND   CREATED         STATUS                     PORTS     NAMES
1c08a7a0d0e4   ubuntu    "bash"    3 minutes ago   Exited (0) 2 minutes ago             dazzling_taussig

To start a stopped container, use docker start, followed by the container ID or the container’s name. Let’s start the Ubuntu-based container with the ID of 1c08a7a0d0e4:

docker start 1c08a7a0d0e4

The container will start, and you can use docker ps to see its status:

Output
CONTAINER ID   IMAGE     COMMAND   CREATED         STATUS         PORTS     NAMES
1c08a7a0d0e4   ubuntu    "bash"    6 minutes ago   Up 8 seconds             dazzling_taussig

To stop a running container, use docker stop, followed by the container ID or name. This time, we’ll use the name that Docker assigned the container, which is dazzling_taussig:

docker stop dazzling_taussig

Once you’ve decided you no longer need a container anymore, remove it with the docker rm command, again using either the container ID or the name. Use the docker ps -a command to find the container ID or name for the container associated with the hello-world image and remove it.

docker rm adoring_kowalevski

You can start a new container and give it a name using the --name switch. You can also use the --rm switch to create a container that removes itself when it’s stopped. See the docker run help command for more information on these options and others.

Containers can be turned into images which you can use to build new containers. Let’s look at how that works.

Step 7 — Committing Changes in a Container to a Docker Image When you start up a Docker image, you can create, modify, and delete files just like you can with a virtual machine. The changes that you make will only apply to that container. You can start and stop it, but once you destroy it with the docker rm command, the changes will be lost for good.

This section shows you how to save the state of a container as a new Docker image.

After installing Node.js inside the Ubuntu container, you now have a container running off an image, but the container is different from the image you used to create it. But you might want to reuse this Node.js container as the basis for new images later.

Then commit the changes to a new Docker image instance using the following command.

docker commit -m "What you did to the image" -a "Author Name" container_id repository/new_image_name The -m switch is for the commit message that helps you and others know what changes you made, while -a is used to specify the author. The container_id is the one you noted earlier in the tutorial when you started the interactive Docker session. Unless you created additional repositories on Docker Hub, the repository is usually your Docker Hub username.

For example, for the user sammy, with the container ID of d9b100f2f636, the command would be:

docker commit -m "added Node.js" -a "sammy" d9b100f2f636 sammy/ubuntu-nodejs

When you commit an image, the new image is saved locally on your computer. Later in this tutorial, you’ll learn how to push an image to a Docker registry like Docker Hub so others can access it.

Listing the Docker images again will show the new image, as well as the old one that it was derived from:

docker images

You’ll see output like this:

Output
REPOSITORY               TAG                 IMAGE ID            CREATED             SIZE
sammy/ubuntu-nodejs   latest              7c1f35226ca6        7 seconds ago       179MB
...

In this example, ubuntu-nodejs is the new image, which was derived from the existing ubuntu image from Docker Hub. The size difference reflects the changes that were made. And in this example, the change was that NodeJS was installed. So next time you need to run a container using Ubuntu with NodeJS pre-installed, you can just use the new image.

You can also build Images from a Dockerfile, which lets you automate the installation of software in a new image. However, that’s outside the scope of this tutorial.

Now let’s share the new image with others so they can create containers from it.

Step 8 — Pushing Docker Images to a Docker Repository The next logical step after creating a new image from an existing image is to share it with a select few of your friends, the whole world on Docker Hub, or other Docker registry that you have access to. To push an image to Docker Hub or any other Docker registry, you must have an account there.

To push your image, first log into Docker Hub.

docker login -u docker-registry-username

You’ll be prompted to authenticate using your Docker Hub password. If you specified the correct password, authentication should succeed.

Note: If your Docker registry username is different from the local username you used to create the image, you will have to tag your image with your registry username. For the example given in the last step, you would type:

docker tag sammy/ubuntu-nodejs docker-registry-username/ubuntu-nodejs

Then you may push your own image using:

docker push docker-registry-username/docker-image-name

To push the ubuntu-nodejs image to the sammy repository, the command would be:

docker push sammy/ubuntu-nodejs

The process may take some time to complete as it uploads the images, but when completed, the output will look like this:

Output
 The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
e3fbbfb44187: Pushed
5f70bf18a086: Pushed
a3b5c80a4eba: Pushed
7f18b442972b: Pushed
3ce512daaf78: Pushed
7aae4540b42d: Pushed

...


After pushing an image to a registry, it should be listed on your account’s dashboard, like that show in the image below.

New Docker image listing on Docker Hub

If a push attempt results in an error of this sort, then you likely did not log in:

Output
The push refers to a repository [docker.io/sammy/ubuntu-nodejs]
e3fbbfb44187: Preparing
5f70bf18a086: Preparing
a3b5c80a4eba: Preparing
7f18b442972b: Preparing
3ce512daaf78: Preparing
7aae4540b42d: Waiting
unauthorized: authentication required

Log in with docker login and repeat the push attempt. Then verify that it exists on your Docker Hub repository page.

You can now use docker pull sammy/ubuntu-nodejs to pull the image to a new machine and use it to run a new container.

Referensi