Difference between revisions of "Cisco: OSPF multi-area network"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 39: | Line 39: | ||
R2: | R2: | ||
| − | /ip address | + | enable |
| − | + | configure terminal | |
| − | + | interface ethernet1/1 | |
| − | + | ip address 10.0.1.2 255.255.255.252 | |
| − | + | no shutdown | |
| + | exit | ||
| + | interface ethernet1/2 | ||
| + | ip address 10.1.2.1 255.255.255.252 | ||
| + | no shutdown | ||
| + | exit | ||
| + | ! | ||
| + | ! NAT GNS3 gw 192.168.122.1 | ||
| + | interface ethernet1/3 | ||
| + | ip address 192.168.122.100 255.255.255.0 | ||
| + | ip address 192.168.122.101 255.255.255.0 secondary | ||
| + | ip address 192.168.122.102 255.255.255.0 secondary | ||
| + | no shutdown | ||
| + | ip route 0.0.0.0 0.0.0.0 192.168.122.1 | ||
| + | end | ||
R3: | R3: | ||
| − | /ip address | + | enable |
| − | + | configure terminal | |
| + | interface ethernet1/1 | ||
| + | ip address 10.1.1.2 255.255.255.252 | ||
| + | no shutdown | ||
| + | exit | ||
| + | interface ethernet1/2 | ||
| + | ip address 192.168.1.1 255.255.255.0 | ||
| + | no shutdown | ||
| + | exit | ||
| + | end | ||
R4: | R4: | ||
| − | /ip address | + | enable |
| − | + | configure terminal | |
| + | interface ethernet1/1 | ||
| + | ip address 10.1.2.2 255.255.255.252 | ||
| + | no shutdown | ||
| + | exit | ||
| + | interface ethernet1/2 | ||
| + | ip address 192.168.2.1 255.255.255.0 | ||
| + | no shutdown | ||
| + | exit | ||
| + | end | ||
==Setup OSPF== | ==Setup OSPF== | ||
Revision as of 08:24, 25 December 2018
Topology Jaringan
R1:
eth1: -- R2: eth1 eth2: -- R3: eth1
R2:
eth1: -- R1: eth1 eth2: -- R4: eth1 eth3: -- nat0: Internet
R3:
eth1: -- R1: eth2 eth2: -- LAN: 192.168.1.1/24
R4:
eth1: -- R2: eth2 eth2: -- LAN: 192.168.2.1/24
Setup IP address
R1:
enable
configure terminal
interface ethernet1/1
ip address 10.0.1.1 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 10.1.1.1 255.255.255.252
no shutdown
exit
end
R2:
enable
configure terminal
interface ethernet1/1
ip address 10.0.1.2 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 10.1.2.1 255.255.255.252
no shutdown
exit
!
! NAT GNS3 gw 192.168.122.1
interface ethernet1/3
ip address 192.168.122.100 255.255.255.0
ip address 192.168.122.101 255.255.255.0 secondary
ip address 192.168.122.102 255.255.255.0 secondary
no shutdown
ip route 0.0.0.0 0.0.0.0 192.168.122.1
end
R3:
enable
configure terminal
interface ethernet1/1
ip address 10.1.1.2 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 192.168.1.1 255.255.255.0
no shutdown
exit
end
R4:
enable
configure terminal
interface ethernet1/1
ip address 10.1.2.2 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 192.168.2.1 255.255.255.0
no shutdown
exit
end
Setup OSPF
R1:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.1.0/30 area=area1
R2:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.2.0/30 area=area2
R3 configuration:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.1.1.0/30 area=area1
R4 configuration:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network add network=10.1.2.0/30 area=area2
Cek route
R3:
/routing ospf interface print
/routing ospf neighbor print
/ip route print
Redistribute Connected
/routing ospf instance set 0 redistribute-connected=as-type-1 /routing ospf instance print
Cek
/routing ospf interface print /routing ospf neighbor print /ip route print