Cacti: instalasi di Ubuntu

From OnnoWiki
Revision as of 07:12, 27 July 2015 by Onnowpurbo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Sebelum instalasi Cacti kita perlu menginstalasi semua dependency.

Instal Dependency

sudo apt-get install apache2 mysql-server php5 libapache2-mod-php5
sudo apt-get -y install rrdtool
sudo apt-get -y install snmp snmpd

Install Cacti dan Spine

sudo apt-get -y install cacti cacti-spine

Pada Popup message pilih OK.

1

Now it will ask you for a webserver that you will use it, we choose Apache2 since that’s what we installed in the dependencies.

4

Next it will ask to configure the Cacti database, select Yes.

2

Now it will ask for your root password of MySQL database.

3

Before we start the web configuration part, we need to start the snmpd service.

sudo /etc/init.d/snmpd start

Now you can access http://ip-of-you-server/cacti after installation, the first login, the default account and password are “admin”.

Click Next.

5

Select new install and click Next

installation

If everything is green, which it should be if you followed all the steps, click Next.

6

Now you need to type the login and password, the default account and password are “admin”.

Then you will be prompted to change the password.

8

After login in to Cacti you should see similar to the following screen.

9

5 – Setup spine

In Console -> Cacti Settings -> Poller, Change the poller Type from comd.php to spine.

spine

6 – Rebuild Poller Cache

Whenever the Poller Interval is changed, the cache must be emptied. To do this, click “System Utilities” under the Utilities heading on the left-hand navigation panel.Click on “Rebuild Poller Cache” to empty the cache.

In about 5 minutes you’ll see the first graphs of localhost server start populating under the graphs tab.

10

Done!



Referensi