Buffalo: WZRHPG450H Cara Recovery

From OnnoWiki
Revision as of 09:06, 22 July 2012 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

To perform a TFTP recovery on this model:

  • Set your IP address to 192.168.11.2
ifconfig eth0:11 192.168.11.2
  • Set a static arp entry for 192.168.11.1 to 02:aa:bb:cc:dd:23
sudo arp -s 192.168.11.1 02:aa:bb:cc:dd:23
  • TFTP the image during the 4 second window and wait

Cara yang lebih baik

curl -T openwrt-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1


If something goes wrong, and the red diag light goes on immediately at boot time and stays on indefinitely, your flash may have failed. You can use the TFTP method to recover the router, but you have to use the buffalo factory image that has the file extension 'enc'. This will bring you back the the factory firmware, but you won't have to solder anything or buy a new router.


Pranala Menarik

Wireless

Storage Server

Beberapa Teknik Operasi NAS