BIRD: OSPF Sederhana
Revision as of 16:59, 16 January 2019 by Onnowpurbo (talk | contribs)
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
protocol ospf 10.10.1.1 {
area 0 {
networks {
10.10.1.0/30;
10.10.1.4/30;
}
interface eth1 {
neighbors {
10.10.1.2;
};
interface eth2 {
neighbors {
10.10.1.6;
};
};
};
}
R2:
protocol ospf 10.10.1.6 {
area 0 {
networks {
10.10.1.4/30;
10.10.1.8/30;
172.16.0.0/16;
}
interface eth1 {
neighbors {
10.10.1.5;
};
interface eth2 {
neighbors {
10.10.1.10;
};
};
};
}
R3:
protocol ospf 10.10.1.2 {
area 0 {
networks {
10.10.1.0/30;
10.10.1.8/30;
192.168.1.0/24;
}
interface eth1 {
neighbors {
10.10.1.1;
};
interface eth2 {
neighbors {
10.10.1.9;
};
};
};
}
Verify
Cek R1, R2, R3
show ip ospf database show ip ospf neighbor show ip ospf route show ip route
Referensi
Pranala Menarik