Difference between revisions of "BIRD: BGP Sederhana"

From OnnoWiki
Jump to navigation Jump to search
 
(10 intermediate revisions by the same user not shown)
Line 54: Line 54:
 
ISP1
 
ISP1
  
ifconfig lo 1.1.1.1 netmask 255.255.255.255
 
 
  ifconfig eth1 192.168.1.1 netmask 255.255.255.0
 
  ifconfig eth1 192.168.1.1 netmask 255.255.255.0
 
  ifconfig eth2 192.168.3.1 netmask 255.255.255.0
 
  ifconfig eth2 192.168.3.1 netmask 255.255.255.0
Line 63: Line 62:
 
ISP2
 
ISP2
  
ifconfig lo 1.1.1.1 netmask 255.255.255.255
 
 
  ifconfig eth1 192.168.2.1 netmask 255.255.255.0
 
  ifconfig eth1 192.168.2.1 netmask 255.255.255.0
 
  ifconfig eth2 192.168.3.2 netmask 255.255.255.0
 
  ifconfig eth2 192.168.3.2 netmask 255.255.255.0
Line 71: Line 69:
 
ISP3
 
ISP3
  
ifconfig lo 1.1.1.1 netmask 255.255.255.255
 
 
  ifconfig eth1 192.168.1.2 netmask 255.255.255.0
 
  ifconfig eth1 192.168.1.2 netmask 255.255.255.0
 
  ifconfig eth2 192.168.2.2 netmask 255.255.255.0
 
  ifconfig eth2 192.168.2.2 netmask 255.255.255.0
Line 95: Line 92:
 
         learn;
 
         learn;
 
         scan time 20;
 
         scan time 20;
}
 
filter packetdns {
 
        # IPs to announce ( 1.1.1.1 in this case)
 
        # Doesn't have to be /32. Can be lower
 
        if net = 1.1.1.1/32 then accept;
 
 
  }
 
  }
 
  protocol device {
 
  protocol device {
Line 107: Line 99:
 
  }
 
  }
 
  protocol direct {
 
  protocol direct {
         interface "lo"; # Restrict network interfaces BIRD works with
+
         interface "lo", "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
 +
}
 +
protocol bgp {
 +
        import all;
 +
        export all;
 +
        local as 10;
 +
        neighbor 192.168.1.2 as 30;
 +
}
 +
protocol bgp {
 +
        import all;
 +
        export all;
 +
        local as 10;
 +
        neighbor 192.168.3.2 as 20;
 
  }
 
  }
protocol bgp {                                 
+
 
        import all;                                             
 
        export all;                                             
 
        export filter packetdns;                                 
 
        local as 10;                                               
 
        neighbor 192.168.1.2 as 20;                                 
 
}                                                                   
 
protocol bgp {                                                     
 
        import all;                                                 
 
        export all;                                                 
 
        export filter packetdns;                                   
 
        local as 10;                                               
 
        neighbor 192.168.3.2 as 30;
 
}                                 
 
 
 
  
 
  # BIRD1 di OpenWRT
 
  # BIRD1 di OpenWRT
Line 150: Line 140:
 
         learn;
 
         learn;
 
         scan time 20;
 
         scan time 20;
}
 
filter packetdns {
 
        # IPs to announce ( 1.1.1.1 in this case)
 
        # Doesn't have to be /32. Can be lower
 
        if net = 1.1.1.1/32 then accept;
 
 
  }
 
  }
 
  protocol device {
 
  protocol device {
Line 162: Line 147:
 
  }
 
  }
 
  protocol direct {
 
  protocol direct {
         interface "lo"; # Restrict network interfaces BIRD works with
+
         interface "lo", "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
 
  }
 
  }
  protocol bgp {                                                              
+
  protocol bgp {
        import all;
+
        import all;
        export all;
+
        export all;
        export filter packetdns;
+
        local as 20;
        local as 20;  
+
        neighbor 192.168.3.1 as 10;
        neighbor 192.168.3.1 as 10;
 
 
  }
 
  }
  protocol bgp {                                                              
+
  protocol bgp {
        import all;
+
        import all;
        export all;
+
        export all;
        export filter packetdns;
+
        local as 20;
        local as 20;
+
        neighbor 192.168.2.2 as 30;
        neighbor 192.168.2.2 as 30;
 
 
  }
 
  }
  
Line 196: Line 179:
  
 
edit
 
edit
 
  
 
  log syslog all;
 
  log syslog all;
Line 205: Line 187:
 
         learn;
 
         learn;
 
         scan time 20;
 
         scan time 20;
}
 
filter packetdns {
 
        # IPs to announce ( 1.1.1.1 in this case)
 
        # Doesn't have to be /32. Can be lower
 
        if net = 1.1.1.1/32 then accept;
 
 
  }
 
  }
 
  protocol device {
 
  protocol device {
Line 217: Line 194:
 
  }
 
  }
 
  protocol direct {
 
  protocol direct {
         interface "lo"; # Restrict network interfaces BIRD works with
+
         interface "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
 
  }
 
  }
  protocol bgp {                                                              
+
  protocol bgp {
 
         import all;
 
         import all;
 
         export all;
 
         export all;
        export filter packetdns;
+
         local as 30;
         local as 30;  
 
 
         neighbor 192.168.1.1 as 10;
 
         neighbor 192.168.1.1 as 10;
 
  }
 
  }
  protocol bgp {                                                              
+
  protocol bgp {
 
         import all;
 
         import all;
 
         export all;
 
         export all;
        export filter packetdns;
 
 
         local as 30;
 
         local as 30;
 
         neighbor 192.168.2.2 as 20;
 
         neighbor 192.168.2.2 as 20;
 
  }
 
  }
 
  
 
  # BIRD1 di OpenWRT
 
  # BIRD1 di OpenWRT
Line 253: Line 227:
  
 
  show interfaces
 
  show interfaces
 +
show protocols
 
  show protocols all bgp1
 
  show protocols all bgp1
  show ip route
+
  show protocols all bgp2
 
+
  show route
 
 
  show route [<prefix>|for <prefix>|for <ip>] [table <t>] [filter <f>|where <cond>]
 
      [all] [primary]  [filtered] [(export|preexport|noexport) <p>] [protocol <p>] [stats|count]
 
  
 
==Referensi==
 
==Referensi==
Line 273: Line 245:
 
* [[Cisco]]
 
* [[Cisco]]
 
* [[Juniper]]
 
* [[Juniper]]
* [[BIRD: Routing]]
+
* [[BIRD1]]
 +
* [[BIRD2]]
 
* [[IPv6]]
 
* [[IPv6]]
  
Line 283: Line 256:
 
* [[IPv6: Cisco]]
 
* [[IPv6: Cisco]]
 
* [[IPv6: Juniper]]
 
* [[IPv6: Juniper]]
* [[IPv6: BIRD: Routing]]
+
* [[IPv6: BIRD1]]
 +
* [[IPv6: BIRD2]]
 
* [[IPv6]]
 
* [[IPv6]]

Latest revision as of 10:25, 18 January 2019

Bgp-multihoming.png


Ada tiga (3) ISP

ISP1:

IP 192.168.1.1/24 menuju ISP3
IP 192.168.3.1/24 menuju ISP2
AS 10
IP 10.100.100.0/24
IP 10.100.200.0/24

ISP2

IP 192.168.2.1/24 - menuju ISP3
IP 192.168.3.2/24 - menuju ISP1
AS 20
IP 10.10.10.0/24
IP 10.10.20.0/24

ISP3 (kita)

IP 192.168.1.2/24 - menuju ISP1
IP 192.168.2.2/24 - menuju ISP2
AS 30
IP 10.1.1.0/24
IP 10.1.2.0/24 


Sambungan

R1
e1 --> R3 e1
e2 --> R2 e2 
e3 --> LAN 10.100.100.0/24
e4 --> LAN 10.100.200.0/24
R2
e1 --> R3 e2
e2 --> R1 e2
e3 --> LAN 10.10.10.0/24
e4 --> LAN 10.10.20.0/24
R3
e1 --> R1 e1
e2 --> R2 e1
e3 --> LAN 10.1.1.0/24
e4 --> LAN 10.1.2.0/24


Setup connection

Pastikan semua ifconfig bersih, lakukan langkah BIRD: dari OpenWRT


ISP1

ifconfig eth1 192.168.1.1 netmask 255.255.255.0
ifconfig eth2 192.168.3.1 netmask 255.255.255.0
ifconfig eth3 10.100.100.1 netmask 255.255.255.0
ifconfig eth4 10.100.200.1 netmask 255.255.255.0


ISP2

ifconfig eth1 192.168.2.1 netmask 255.255.255.0
ifconfig eth2 192.168.3.2 netmask 255.255.255.0
ifconfig eth3 10.10.10.1 netmask 255.255.255.0
ifconfig eth4 10.10.20.1 netmask 255.255.255.0

ISP3

ifconfig eth1 192.168.1.2 netmask 255.255.255.0
ifconfig eth2 192.168.2.2 netmask 255.255.255.0
ifconfig eth3 10.1.1.1 netmask 255.255.255.0
ifconfig eth4 10.1.2.1 netmask 255.255.255.0

BGP Peering

Consider that IP connectivity between ISPs edge routers and Our Core router is already set up and working properly. So we can start to establish BGP peering to both ISPs.

ISP1

# vi /usr/local/etc/bird6.conf  # BIRD appliance di GNS3
vi /etc/bird.conf               # BIRD1 di OpenWRT

edit

log syslog all;
router id 192.168.1.1;
protocol kernel {
        import all;
        export all;
        learn;
        scan time 20;
}
protocol device {
        import all;
        export all;
        scan time 10;           # Scan interfaces every 10 seconds
}
protocol direct {
        interface "lo", "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
}
protocol bgp {
        import all;
        export all;
        local as 10;
        neighbor 192.168.1.2 as 30;
}
protocol bgp {
        import all;
        export all;
        local as 10;
        neighbor 192.168.3.2 as 20;
}


# BIRD1 di OpenWRT
killall zebra
killall bgpd
killall watchquagga
killall ospfd
killall ospf6d
killall ripd
killall ripngd
killall bird4
bird4

ISP2

# vi /usr/local/etc/bird6.conf  # BIRD appliance di GNS3
vi /etc/bird.conf               # BIRD1 di OpenWRT

edit

log syslog all;
router id 192.168.2.1;
protocol kernel {
        import all;
        export all;
        learn;
        scan time 20;
}
protocol device {
        import all;
        export all;
        scan time 10;           # Scan interfaces every 10 seconds
}
protocol direct {
        interface "lo", "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
}
protocol bgp {
        import all;
        export all;
        local as 20;
        neighbor 192.168.3.1 as 10;
}
protocol bgp {
        import all;
        export all;
        local as 20;
        neighbor 192.168.2.2 as 30;
}
# BIRD1 di OpenWRT
killall zebra
killall bgpd
killall watchquagga
killall ospfd
killall ospf6d
killall ripd
killall ripngd
killall bird4
bird4

ISP3

# vi /usr/local/etc/bird6.conf  # BIRD appliance di GNS3
vi /etc/bird.conf               # BIRD1 di OpenWRT

edit

log syslog all;
router id 192.168.1.2;
protocol kernel {
        import all;
        export all;
        learn;
        scan time 20;
}
protocol device {
        import all;
        export all;
        scan time 10;           # Scan interfaces every 10 seconds
}
protocol direct {
        interface "eth1", "eth2", "eth3", "eth4" ; # Restrict network interfaces BIRD works with
}
protocol bgp {
       import all;
       export all;
       local as 30;
       neighbor 192.168.1.1 as 10;
}
protocol bgp {
       import all;
       export all;
       local as 30;
       neighbor 192.168.2.2 as 20;
}
# BIRD1 di OpenWRT
killall zebra
killall bgpd
killall watchquagga
killall ospfd
killall ospf6d
killall ripd
killall ripngd
killall bird4
bird4

Test

birdc4

ketik

show interfaces
show protocols
show protocols all bgp1
show protocols all bgp2
show route

Referensi


Pranala Menarik