Arduino: Ping dengan hc sr04

From OnnoWiki
Revision as of 12:58, 5 January 2016 by Onnowpurbo (talk | contribs) (New page: Sumber: http://www.instructables.com/id/Easy-ultrasonic-4-pin-sensor-monitoring-hc-sr04/ ==Code== int vcc = 2; //attach pin 2 to vcc int trig = 3; // attach pin 3 to Trig int echo...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Sumber: http://www.instructables.com/id/Easy-ultrasonic-4-pin-sensor-monitoring-hc-sr04/



Code

int vcc = 2; //attach pin 2 to vcc
int trig = 3; // attach pin 3 to Trig
int echo = 4; //attach pin 4 to Echo
int gnd = 5; //attach pin 5 to GND

void setup() { 

pinMode (vcc,OUTPUT);
pinMode (gnd,OUTPUT);
// initialize serial communication:
Serial.begin(9600);
}

void loop()
{
digitalWrite(vcc, HIGH);
// establish variables for duration of the ping,
// and the distance result in inches and centimeters:
long duration, inches, cm;

// The PING))) is triggered by a HIGH pulse of 2 or more microseconds.
// Give a short LOW pulse beforehand to ensure a clean HIGH pulse:
pinMode(trig, OUTPUT);
digitalWrite(trig, LOW);
delayMicroseconds(2);
digitalWrite(trig, HIGH);
delayMicroseconds(5);
digitalWrite(trig, LOW);  

// The same pin is used to read the signal from the PING))): a HIGH
// pulse whose duration is the time (in microseconds) from the sending
// of the ping to the reception of its echo off of an object.
pinMode(echo,INPUT);
duration = pulseIn(echo, HIGH); 

// convert the time into a distance
inches = microsecondsToInches(duration);
cm = microsecondsToCentimeters(duration); 

Serial.print(inches);
Serial.print("in, ");
Serial.print(cm);
Serial.print("cm");
Serial.println(); 

delay(100);
} 

long microsecondsToInches(long microseconds)
{
// According to Parallax's datasheet for the PING))), there are
// 73.746 microseconds per inch (i.e. sound travels at 1130 feet per
// second). This gives the distance travelled by the ping, outbound
// and return, so we divide by 2 to get the distance of the obstacle.
// See: http://www.parallax.com/dl/docs/prod/acc/28015-PI...
return microseconds / 74 / 2;
}

long microsecondsToCentimeters(long microseconds)
{
// The speed of sound is 340 m/s or 29 microseconds per centimeter.
// The ping travels out and back, so to find the distance of the
// object we take half of the distance travelled.
return microseconds / 29 / 2;
} 


Referensi