Xorg.conf untuk mereka yang menggunakan Sis

Untuk mereka yang menggunakan VGA Sis Waktu pertama kali install Ubuntu tekan <F6> terus ketik sebelum akhir kalimat yang ada "--"

noapic acpi=off vga=771

Kalau sudah berhasil di install ganti /etc/X11/xorg.conf punya Mandriva kalau gak salah. Untuk memudahkan berikut adalah isi xorg.conf tersebut

# File generated by XFdrake (rev 247269) 

Section "Monitor"
	Identifier "monitor1"
	VendorName "Generic"
	ModelName "Flat Panel 1280x800" 
	HorizSync 31.5-90
	VertRefresh 60
	Option "PreferredMode" "1280x800"
	ModeLine "1280x800" 68.94 1280 1301 1333 1408 800 803 808 816 -hsync -vsync
	#ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
	#ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
	#ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync
	#ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync
	#ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync
	#ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync
	ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
	#ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
	# Monitor preferred modeline (60.0 Hz vsync, 49.0 kHz hsync, ratio 16/10, 106 dpi)
	# TV fullscreen mode or DVD fullscreen output.
	# 768x576 @ 79 Hz, 50 kHz hsync
	# 768x576 @ 100 Hz, 61.6 kHz hsync
	# modeline generated by gtf(1) [handled by XFdrake]
	# modeline generated by gtf(1) [handled by XFdrake]
	# modeline generated by gtf(1) [handled by XFdrake]
	# modeline generated by gtf(1) [handled by XFdrake]
	# modeline generated by gtf(1) [handled by XFdrake]
	# modeline generated by gtf(1) [handled by XFdrake]
EndSection

Section "Screen"
	Identifier "screen1"
	Device "device1"
	Monitor "monitor1"
	DefaultColorDepth 24
	Option         "RenderAccel" "True"
	Option "AddARGBGLXVisual" "Enable"
	SubSection "Display"
		Depth 8
		Modes "1280x800"
		#Virtual	1280 768
		Virtual		1280 800
	EndSubSection
	SubSection "Display"
		Depth 15
		Modes "1280x800"
		#Virtual	1280 768
		Virtual		1280 800
	EndSubSection
	SubSection "Display"
		Depth 16
		Modes "1280x800"
		#Virtual	1280 768
		Virtual		1280 800
	EndSubSection
	SubSection "Display"
		Depth 24
		Modes "1280x800"
		#Virtual	1280 768
		Virtual		1280 800
	EndSubSection
EndSection

Section "Module"
	Load "dbe" # Double-Buffering Extension
	Load "v4l" # Video for Linux
	Load "extmod"
# 	Load "freetype"
	Load "glx" # 3D layer
	Load "dri"
	Load "GLcore"
# 	Load "xtrap"
	Load "record"
	###    #Disable "dri"

# Load "type1"

EndSection

Section "InputDevice"
	Identifier "Keyboard1"
	Driver "kbd"
	Option "XkbModel" "pc105"
	Option "XkbLayout" "us"
	Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
	Identifier "Mouse1"
	Driver "mouse"
	Option "Protocol" "ExplorerPS/2"
	Option "Device" "/dev/mouse"
EndSection

Section "Extensions"
	Option         "Composite" "off"
EndSection

Section "ServerLayout"
	Identifier "layout1"
	InputDevice "Keyboard1" "CoreKeyboard"
	InputDevice "Mouse1" "CorePointer"
	Screen "screen1"
EndSection

Section "Device"
	Identifier "device1"
	VendorName "Silicon Integrated Systems [SiS]"
	BoardName "SiS SiS 670 / 671-based cards"
	Driver "vesa"
	VideoRam 262144
	BusID "PCI:1:0:0"
	Option "NoFlip" "True"
	Option "EnableSiSCtrl" "yes"
	Option "DPMS"
	Option "XAANoOffscreenPixmaps" "True"
	Option "ForcePanel" "True"
	Option "TripleBuffer" "True"
	Option "LCDPort" "DFP_HIGHLOW"
	Option "EnableAGPDMA" "True"
	Option "DRI" "true"
	Option "AllowGLXWithComposite" "True"
	Option "DamageEvents" "True"
EndSection

Section "ServerFlags"
	AllowMouseOpenFail # allows the server to start up even if the mouse does not work
EndSection

Section "ServerFlags"
	Option "AIGLX" "off"
	Option "IgnoreABI" "true"
	Option "Composite" "True"
	##     Option "Xinerama" "enable"
EndSection

Pranala Menarik

• Linux Howto