5G Daftar Istilah

From OnnoWiki
Revision as of 05:28, 29 December 2022 by Onnowpurbo (talk | contribs)
Jump to navigation Jump to search

Berbagai istilah yang digunakan dalam 5G dilihat di

https://www.mpirical.com/glossary/

Berikut adalah beberapa yang digunakan disini yang di beri keterangan dalam bahasa Indonesia.


Daftar Istilah
Istilah Istilah Panjang Penjelasan
3GPP Third Generation Partnership Project The 3GPP was formed in December 1998 as a collaboration agreement bringing together a number of telecommunication standards bodies. These standards bodies are referred to as Organizational Partners. The original aim of the 3GPP was to produce globally applicable technical specifications for third generation mobile systems based on evolved GSM core networks and the radio access technology UTRA (Universal Terrestrial Radio Access). This was subsequently amended to include the maintenance and development of the GSM standards including GPRS and EDGE (Enhanced Data rates for Global Evolution). Further network developments attributed to the 3GPP included evolution of service management through IMS , increased data rates in the UTRA via HSPA+ and most recently, the work associated with LTE, LTE Advanced and LTE Advanced Pro.
4G Fourth Generation 4G is the term given to the fourth generation of mobile communication systems, offering significantly advanced data rates across an all IP based bearer network. The main technology behind 4G is LTE (Long Term Evolution), although HSPA (High Speed Packet Access) networks and WiMAX based network may also be given the 4G label.
5G Fifth Generation 5G is the term given to the fifth generation of mobile communication technology. Work began within the 3GPP on the first Release 15 specification for 5G, termed the NexGen (Next Generation) architecture in December 2016. The 5G NR (New Radio) standardization work is also in the development process, with the first phase of expected 5G deployments based on Release 15 due in 2020.
5GC 5G Core Network The 5G Core (3GPP) includes various functions: AUSF (Authentication Server Function), AMF (Core Access and Mobility Management Function), DN (Data Network), DSF (Data Storage Network Function), NRF (NF Repository Function), PCF (Policy Control Function), SMF (Session Management Function), UDM (Unified Data Management) and UPF (User Plane Function).
5GMM 5GS Mobility Management This protocol provides procedures for the control of mobility when the UE is using the NG-RAN and/or non-3GPP access network.
5G NAS 5G Non Access Stratum The 5G NAS (Non-Access Stratum) includes procedures related to 5GMM (5GS Mobility Management) and 5GSM (5GS Session Management) on the 5GS (5G system).
5G RAN 5G Radio Access Network The 5G Radio Access Network identifies a radio access network that connects to the 5GC (5G Core). Examples include the 5G New Radio and radio systems with New Radio extensions.
AMF Authentication Management Field AMF is a term used within the UMTS AKA (Authentication and Key Agreement) architecture. The AMF is a 16 bit value which is used to set the acceptable synchronization window in both the UE (User Equipment) and the network.
AUSF Authentication Server Function The Authentication Server Function is part of the 3GPP 5G Architecture. It is used to facilitate 5G security processes.
eNB Evolved Node B The eNB serves as the base station within the E-UTRAN, terminating the air interface on the network side. Consequently, the eNB is responsible for all radio resource management, as well as allocation of user traffic to the downlink/uplink, security and relaying of higher layer NAS (Non Access Stratum) signalling to the MME (Mobility Management Entity). The eNB is also capable of conducting an inter eNB handover procedure via the X2 interface.
EPC Evolved Packet Core Evolution of the core network started with Release 4. This provided the starting point for the introduction of IP into the CS domain of the core network as well as enhancements to enable real time and non real time services to be successfully integrated onto a common transport medium. In Release 8 of the 3GPP standards the functionality of the core network is made flatter with much of the intelligence required to support service delivery being placed within domains such as the IMS. Consequently the EPC comprises of the MME (Mobility Management Entity) that performs many of the mobility functions traditionally provided by the SGSN such as paging, security and Idle Mode procedures. EPC also includes the S-GW (Serving Gateway), which replaces the User Plane functionality of the SGSN, as well as the PDN-GW (Packet Data Network Gateway), which terminates the user plane within the EPC.
E-UTRAN Evolved – Universal Terrestrial Radio Access Network The E-UTRAN is the LTE RAN, forming part of the overall Evolved Packet System.
FDD Frequency Division Duplex Frequency Division Duplex is employed in radio systems to provide an uplink and downlink radio channel between the network and the user. The frequencies separated by a duplex spacing. Users tune between the uplink and downlink frequencies to transmit and receive respectively.
gNB Next Generation Node B The gNB is a 3GPP 5G Next Generation base station which supports the 5G New Radio.
GUMMEI Globally Unique MME Identifier The GUTI (Globally Unique Temporary Identity) has two main components, the GUMMEI (Globally Unique MME Identifier) that uniquely identifies the MME that allocated the GUTI and the M-TMSI (M-Temporary Mobile Subscriber Identity) that provides for an unambiguous identity of the UE within this MME.
GUTI Globally Unique Temporary ID In LTE the GUTI is allocated to the UE by the MME and has two components. These are the GUMMEI (Globally Unique MME ID) and the M-TMSI (MME-TMSI). While the GUMMEI identifies the MME, the M-TMSI identifies the UE within the MME.
GTP-U GPRS Tunnelling Protocol User GPRS Tunnelling Protocol – User plane messages are exchanged between GSN (Gateway Support Node) pairs or GSN/ RNC (Radio Network Controller) pairs in a path. The user plane messages are used to carry user data packets, and signalling messages for path management and error indication. The GPRS Tunnelling Protocol (GTP) is a group of IP-based communications protocols used within GSM, UMTS, LTE and 5G NR radio networks. GTP-U is used to carry user data inside mobile networks.
IMSI International Mobile Subscriber Identity The International Mobile Subscriber Identity is a unique identifier allocated to each mobile subscriber in a GSM, UMTS, LTE and 5G network. It consists of a MCC (Mobile Country Code), a MNC (Mobile Network Code) and a MSIN (Mobile Subscriber Identification Number).
LAI Location Area Identity The Location Area Identity uniquely identifies a LA (Location Area) within any PLMN (Public Land Mobile Network). It is comprised of the MCC (Mobile Country Code), MNC (Mobile Network Code) and the LAC (Location Area Code).
LTE Long Term Evolution Standardized in 3GPP Release 8, LTE introduces a network which is based purely on IP as the transport mechanism. That is, all traffic, including voice, will be passed across the E-UTRAN as an IP datagram. Moreover, all of the network nodes within LTE use IP to carry signalling between one another. Termed the EPS (Evolved Packet System), the end to end LTE network is comprised of the E-UTRAN (Evolved – Universal Terrestrial Radio Access Network) and the EPC (Evolved Packet Core).
MCC Mobile Country Code The Mobile Country Code is a three digit number uniquely identifying a given country. It is utilized within numerous identities across 3GPP mobile networks, including the IMSI (International Mobile Subscriber Identity), LAI (Location Area Identity) and GUTI (Globally Unique Temporary ID).

Mobile Country Code is used in wireless telephone networks such as GSM, CDMA, WCDMA or LTE in order to identify mobile user belongs to which country. MCC consists of 3 decimal digits.

MME Mobility Management Entity The MME is responsible for mobility and session management procedures in the EPC. As such, the MME communicates with the mobile via NAS (Non Access Stratum) signalling and communicates with the HSS through Diameter. Key responsibilities include ECM (EPS Connection Management), EMM (EPS Mobility Management), gateway selection, NAS security and handover assistance.
MNC Mobile Network Code The Mobile Network Code is either a two or three digit number used to uniquely identify a given network from within a specified country ( MCC (Mobile Country Code)). The MNC is used as part of the IMSI (International Mobile Subscriber Identity) and LAI (Location Area Identity) etc.
NAS Non Access Stratum The Non Access Stratum is a functional layer running between the UE (User Equipment) and the CN (Core Network). The layer supports traffic and signalling messages between the CN and UE (User Equipment).
NGAP NG Application Protocol NGAP is found on the N2 reference point between the gNB and the AMF (Core Access and Mobility and Management Function) in order to support both UE and non UE associated services. This includes operations such as configuration updates, UE context transfer, PDU Session resource management and also support for mobility procedures. NGAP is also used to convey downlink and uplink NAS (Non Access Stratum) messages as a payload, as well as support CM Idle and CM Connected operations such as Paging and UE Context release.
PFCP Packet Forwarding Control Protocol (PFCP) Packet Forwarding Control Protocol (PFCP) is a 3GPP protocol used on the Sx/N4 interface between the control plane and the user plane function, specified in TS 29.244.[1] It is one of the main protocols introduced in the 5G Next Generation Mobile Core Network (aka 5GC[2]), but also used in the 4G/LTE EPC to implement the Control and User Plane Separation (CUPS).[3] PFCP and the associated interfaces seek to formalize the interactions between different types of functional elements used in the Mobile Core Networks as deployed by most operators providing 4G, as well as 5G, services to mobile subscribers
PHY Physical Link A Physical Link is the connection between devices.
PLMN Public Land Mobile Network
PLMN.png
A Public Land Mobile Network is a generic name for all mobile wireless networks that use land based radio transmitters or base stations. Public Land Mobile Network Identifier or with abbreviated version PLMN is a combination of MCC and MNC. It is unique value and globally used to identify the mobile network that a user subscribed.
PRACH Physical Random Access Channel The Random Access procedure is used in various scenarios, including initial access, handover, or re-establishment. Like other 3GPP systems the random access procedure provides a method for contention and non-contention based access. The PRACH (Physical Random Access Channel) includes RA (Random Access) preambles generated from Zadoff-Chu sequences.
S1AP S1 Application Protocol S1AP is used between the eNB and the MME in order to support operations such as E-RAB (E-UTRAN Radio Access Bearer) Management, transfer of UE Context information, NAS Signalling transport, Paging and EPC based mobility.
SBI Service Based Interface SBI is the term given to the API based communication that can take place between two VNFs (Virtualized Network Functions) within the 5G SBA (Service Based Architecture). A given VNF can utilise an API call over the SBI in order to invoke a particular service or service operation.
SCTP Stream Control Transmission Protocol SCTP provides sequential, reliable delivery of higher layer data, using logical streams to separate this functionality and hence avoid head of line blocking. An SCTP connection between two network nodes e.g. eNB (Evolved Node B) to MME (Mobility Management Entity) is termed an SCTP Association, which can feature flow control and multihoming as standard capabilities. SCTP provides much of the same functionality as TCP (Transmission Control Protocol), without the inherent drawbacks that TCP can suffer from.
SGW-U Serving Gateway User plane function The SGW-U is the user data plane ingress and egress point of the E-UTRAN side of the EPC when control and user plane separation is in place. As such, when the subscriber moves around the E-UTRAN, their point of attachment to the EPC remains fixed at the SGW-U (unless the network decides that a SGW-U relocation is required). A single subscriber may be supported by multiple SGW-U if connectivity to multiple PDNs are in place. Additional responsibilities include lawful interception of subscriber traffic, inter-operator accounting, as well as downlink data buffering whilst the subscriber is paged.
TAC Tracking Area Code An element of the TAI which serves to uniquely identify the Tracking Area. Tracking Area is a logical concept of an area where a user can move around without updating the MME. The network allocates a list with one or more TAs to the user. In certain operation modes, the UE may move freely in all TAs of the list without updating the MME. You can think of 'Tracking Area' as 'Routing Area' in UMTS.
TAI Timing Advance Index The MS (Mobile Station) performing uplink or downlink packet transfer, will receive a packet uplink or downlink assignment message. This message will contain the MS assigned TAI and the PTCCH (Packet Timing Control Channel). The TAI specifies which PTCCH subchannel is to be used by the MS.
TDD Time Division Duplex In a Time Division Duplex system a common carrier is shared between the uplink and downlink, the resource being switched in time. Users are allocated one or more timeslots for uplink and downlink transmission. The main advantage of TDD operation is that it allows asymmetric flow which is more suited to data transmission.
TMSI Temporary Mobile Subscriber Identity In order to ensure subscriber identity confidentiality the VLR (Visitor Location Register) and SGSN (Serving GPRS Support Node) may allocate TMSI (Temporary Mobile Subscriber Identities) to visiting mobile subscribers. The VLR and SGSN must be capable of correlating an allocated TMSI with the IMSI (International Mobile Subscriber Identity) of the MS (Mobile Station) to which it is allocated. A MS may be allocated two TMSI, one for services provided through the VLR, and the other known as the P-TMSI (Packet TMSI) for services provided through the SGSN.
UE User Equipment The UMTS Subscriber or UE (User Equipment) is a combination of ME (Mobile Equipment) and SIM / USIM (Subscriber Identity Module / UMTS Subscriber Identity Module).
UMTS Universal Mobile Telecommunications System A 3G mobile communication system which supports improved data rates over GSM and subsequently provides an enhanced range of multimedia services. UMTS has increased convergence between telecommunications, IT (Information technology), media and content industries to deliver new services and create fresh revenue generating opportunities. UMTS delivers low cost, high capacity mobile communications, offering data rates as high as 2Mbps (under ideal conditions) with global roaming and other advanced capabilities. The specifications defining UMTS are formulated by the 3GPP.
RRC Radio Recource Control RRC is a sublayer of Layer 3 on the UMTS radio interface; it exists in the control plane only and provides an information transfer service to NAS (Non Access Stratum) signalling. RRC is also responsible for controlling the configuration of the UMTS radio interface, facilitating the establishment and management of radio bearers, mobility management and security.
WiFi Wireless Fidelity WiFi is an interoperability standard developed by the WiFi Alliance and issued to those manufacturers whose IEEE 802.11 equipment has passed a suite of basic interoperability tests. Equipment passing these tests carries the WiFi logo.
WiMAX World wide Interoperability for Microwave Access WiMAX is a mobile broadband technology standardized by the IEEE 802.16m working group. Although WiMAX is a potential option for supporting 4G, it has seen mixed success around the globe, with many service providers adopting LTE as an alternative.
X2AP X2 Application Protocol X2AP is a control protocol found between eNBs on the X2 control plane. Main functions of X2AP include X2 based mobility, as well as X2 “Global Procedures”. The former is largely associated with eNB (Evolved Node B) controlled handover procedures whereas the latter deals with the establishment and management of the X2 connection.


Referensi