Free5GC: Install

From OnnoWiki
Jump to navigation Jump to search

Sumber: https://www.free5gc.org/installations/stage-1-all-in-one/


Kebutuhan Minimal

Software

  • OS: Ubuntu 18.04
  • Linux kernel: 4.15.0-43-generic
  • gcc 7.3.0
  • Go 1.11.4
  • QEMU emulator 2.11.1

Hardware

  • CPU: Intel i5 processor
  • RAM: 4GB
  • Hard drive: 160G
  • NIC card: 1Gbps ethernet card

Hardware recommended

  • CPU: Intel i7 processor
  • RAM: 8GB
  • Hard drive: 160G
  • NIC card: 10Gbps ethernet card

Hardware Tested

eNB

  • WNC OSQ4G-01E2, 3GPP Rel-13 compliance (4G LTE Small Cell）
  • D-Link DWR-1012, 3GPP Rel-12 compliance (4G LTE Small Cell)
  • GemTek WLTGFC-101, 3GPP Rel-9 compliance (4G LTE Small Cell)

UE

  • LG C90 cellular phone
  • D-Link DWR-932C dongle via USB cable

Persiapan

Setup KVM Environment

  • VM NIC Cards
    • NIC for connecting to the Internet
      • Network source: Virtual network - NAT
      • Interface name in VM: ens3 (in this example)
    • NIC for connecting to eNB:
      • Network source: Host device <Host Interface Name>
      • Interface name in VM: ens4 (in this example)

Kumpulan Informasi konfigurasi eNodeB dan USIM

Informasi eNodeB (dalam contoh ini)

IP Address: 192.188.2.1
Gateway:    192.188.2.2 (IP NIC yang tersambung ke eNB)
PLMN:
  MCC: 208
  MNC: 93
MME GID:  1
MME Code: 1
TAC: 1

Informasi USIM (dalam contoh ini)

IMSI 208930000000003
K    8baf473f2f8fd09487cccbd7097c6862
OPc  8e27b6af0e692e750f32667a3b14605d

Instalasi

Ikuti instruksi dari Part A ~ Part C.

Part A. Compile Source Code

Menyiapkan aplikasi pendukung.

Install MongoDB 3.6.3, Golang 1.11.4. 

sudo apt-get update
sudo apt-get -y install mongodb wget git
sudo systemctl start mongodb (if '/usr/bin/mongod' is not running)

Check apakah golang sudah di instalasi 

go version

Jika belum, jalankan perintah di bawah ini, 

wget -q https://storage.googleapis.com/golang/getgo/installer_linux
chmod +x installer_linux
./installer_linux
source ~/.bash_profile
rm -f installer_linux

go get -u -v "github.com/gorilla/mux"
go get -u -v "golang.org/x/net/http2"
go get -u -v "golang.org/x/sys/unix"

Untuk menjalankan free5GC dengan least privilege, TUN device permission harus crw-rw-rw-(666). 

ls -al /dev/net/tun

crw-rw-rw- 1 root root 10, 200 Jan 14 13:09 /dev/net/tun

Tulis file konfigurasi untuk TUN device. 

sudo sh -c "cat << EOF > /etc/systemd/network/99-free5gc.netdev
[NetDev]
Name=uptun
Kind=tun
EOF"

sudo systemctl enable systemd-networkd
sudo systemctl restart systemd-networkd

Cek konfigurasi IPv6 Kernel. Meskipun kita dapat melewati langkah ini, sangat di sarankan untuk set untuk mendukung IPv6-enabled UE. 

sysctl -n net.ipv6.conf.uptun.disable_ipv6

(jika menghasilkan 0 maka IPv6 enable, kita bisa meloncati langkah berikut) 

sudo sh -c "echo 'net.ipv6.conf.uptun.disable_ipv6=0' > /etc/sysctl.d/30-free5gc.conf"
sudo sysctl -p /etc/sysctl.d/30-free5gc.conf

Saat ini kita siap untuk menset IP address pada TUN device. Jika IPv6 di disabled untuk TUN device, maka kita perlu menghilangkan address=cafe::1/64 from konfigurasi di bawah. 

sudo sh -c "cat << EOF > /etc/systemd/network/99-free5gc.network
[Match]
Name=uptun
[Network]
Address=45.45.0.1/16
Address=cafe::1/64
EOF"

sudo systemctl enable systemd-networkd
sudo systemctl restart systemd-networkd

Tambahkan kalimat-kalimat berikut ke /etc/network/interfaces untuk network-manager service 

auto uptun
iface uptun inet static  
	address 45.45.0.1 
	netmask 255.255.0.0

iface uptun inet6 static
	pre-up modprobe ipv6 
	address cafe::1
	netmask 64

Restart uptun interface 

sudo ip a flush uptun
sudo systemctl restart networking

Check apakah uptun sudah up 

sudo apt-get -y install net-tools
ifconfig uptun

AMF, SMF, UPF, HSS, dan PCRF

Instal depedency untuk membuat dari source 

sudo apt-get -y install autoconf libtool gcc pkg-config git flex bison libsctp-dev libgnutls28-dev libgcrypt-dev libssl-dev 
libidn11-dev libmongoc-dev libbson-dev libyaml-dev

Git clone dan compile 

git clone https://bitbucket.org/nctu_5g/free5gc-stage-1.git
cd free5gc-stage-1
autoreconf -iv
./configure --prefix=`pwd`/install
make -j `nproc`
make install

Part B. VM Internal Network Environment Setting

[Option 1] perlu menjalankan secara manual setiap kali boot, 

sudo ifconfig ens4 192.188.2.2
sudo sh -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
sudo iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE
sudo iptables -I INPUT -i uptun -j ACCEPT

[Option 2] di konfigurasi untuk auto run saat boot 

sudo sh -c "cat << EOF > /etc/init.d/ngc-network-setup
#!/bin/sh
### BEGIN INIT INFO
# Provides:          ngc-network-setup
# Required-Start:    networkd
# Required-Stop:     networkd
# Default-Start:     networkd
# Default-Stop:      networkd
# Short-Description:
# Description:
#
### END INIT INFO

ifconfig ens4 192.188.2.2
sh -c 'echo 1 > /proc/sys/net/ipv4/ip_forward'
iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE
iptables -I INPUT -i uptun -j ACCEPT
EOF"

sudo chmod 755 /etc/init.d/ngc-network-setup
sudo /etc/init.d/ngc-network-setup

sudo ln -s /etc/init.d/ngc-network-setup /etc/rc3.d/S99ngc-network-setup
sudo ln -s /etc/init.d/ngc-network-setup /etc/rc4.d/S99ngc-network-setup
sudo ln -s /etc/init.d/ngc-network-setup /etc/rc5.d/S99ngc-network-setup

Part C. Run

Run in all-in-one mode

Aplikasi (daemon) free5gc-ngcd termasuk di dalamnya AMF, SMF, UPF, HSS, dan PCRF. Jadi, daripada menjalankan semua 5 daemon, kita bisa menjalankan free5gc-ngcd di development environment kita. 


./free5gc-ngcd

Saat running free5gc-ngcd

  • Semua log dari AMF, SMF, UPF, HSS, dan PCRF akan di tulis ke ./install/var/log/free5gc/free5gc.log.
  • Semua setting akan di managed dari satu file ./install/etc/free5gc/free5gc.conf.
  • Kita akan melihat path log/conf di awal screen saat running.
  • Kita dapat menggunakan argumen -f untuk menentukan config file yang akan digunakan.

Fungsi 5GC di jalankan terpisah

Sebetulnya fungsi 5GC dapat dijalankan secara terpisah. 

./free5gc-upfd
./free5gc-amfd
./free5gc-smfd
./nextepc-hssd
./nextepc-pcrfd

Catatan: kita juga dapat menjalankan fungsi 5GC yang di mesin terpisah.

[Optional] Self-test

Pengembang 5GC juga menyediakan program yang memeriksa apakah penginstalan sudah benar. Setelah menjalankan wireshark, pilih interface loopback, lalu filter s1ap || diameter || gtpv2 || gtp dan jalankan, 

./test/testngc

atau 

./test/testngc -f install/etc/free5gc/test/free5gc.testngc.conf

Kita dapat melihat paket-paket dibuat secara virtual.

Part D. Web User Interface

Install Node.js dan NPM 

sudo apt-get -y install curl
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get -y install nodejs

Install dependency untuk run WebUI (pertama kali) 

cd webui
npm install

Run WebUI 

cd webui
npm run dev

Sekarang server web berjalan di http://localhost:3000. username dan password default adalah "admin" dan "1423".

Konfigurasi Core Network

file konfigurasi free5GC Ubah ./install/etc/free5gc/free5gc.conf

amf-slap address (line 67) 

 amf:
   s1ap:
     addr: <IP of GW NIC to eNB: 192.188.2.2>

upf-gtpu address (line 162) 

 smf:
   upf:
     addr: <IP of GW NIC to eNB: 192.188.2.2>

AMF GUMMEI (line 91) 

 amf:
   gummei:
     plmn_id:
       mcc: <eNB MCC: 208>
             mnc: <eNB MNC: 93>
     mme_gid: <eNB MME GID: 1>
     mme_code: <eNB MME Code: 1>

AMF TAI (line 130) 

 amf:
   tai:
     plmn_id:
       mcc: <eNB MCC: 208>
             mnc: <eNB MNC: 93>
         tac: <eNB TAC: 1>

Tambahkan subscriber (UE)

Tambahkan subscriber melalui Web UI Run web server: 

cd ./webui && npm run dev

Masuk ke http://localhost:3000

  • Username : admin
  • Password : 1423

Tambahkan subscriber dengan IMSI, K, OPc

  • Masuk ke menu Subscriber.
  • Click Tombol `+` untuk menambahkan subscriber baru.
  • Isi IMSI, security context(K, OPc, AMF), dan APN dari subscriber.
  • Click Tombol `SAVE`

Penambahan ini akan langsung berlaku di free5GC tanpa perlu me-restart daemon apa pun.

Rebuild Project

To completely rebuild the project after modifying source code 

(Control-C kill free5gc-ngcd)
make maintainer-clean
rm -rf ./install
git pull
autoreconf -iv
./configure --prefix=`pwd`/install
make -j `nproc`
make install
./free5gc-ngcd

Troubleshooting

Note for modifying configuration file Use space for indent. DO NOT use tab. A white space must be added between the colon and value after the item name, e.g. addr: 192.188.2.2 

./test/testngc test failure

Make sure all configuration files and environment settings are correct.

Kill testngc process which didn’t finish correctly 

killall -9 testngc

Remove test subscriber left by previous failed test (NextEPC issue #57) 

$ mongo
> use free5gc
> db.subscribers.find()  ### (Check the test subscriber)
> db.subscribers.drop()  ### Remove all subscriber
> db.subscribers.find()  ### (Check that all subscribers are empty)
./free5gc-ngcd errors

ERRR: - The certificate is expired (NextEPC issue #94) 

cd support/freeDiameter
./make_certs.sh .
cd ../..
make install

Address already in use 

$ killall -9 testngc

or 

$ killall -9 free5gc-ngcd

Rebuild failure 

config.status: error: cannot find input file: `Makefile.in' (NextEPC issue #68)
autoheader \
    && aclocal \
    && libtoolize --ltdl --copy --force \
    && automake --add-missing --copy \
    && autoconf \
    && ./configure

Appendix A: Program the SIM Card

Install packages: 

sudo apt-get install pcscd pcsc-tools libccid python-dev swig python-setuptools python-pip libpcsclite-dev
sudo pip install pycrypto

Download PySIM 

git clone git://git.osmocom.org/pysim.git

Change to pyscard folder and install 

cd <pyscard-path>
sudo /usr/bin/python setup.py build_ext install

Verify your reader is ready 

sudo pcsc_scan

Check whether your reader can read the SIM card 

cd <pysim-path>
./pySim-read.py –p 0

Program your SIM card information 

./pySim-prog.py -p 0 -x 208 -y 93 -t sysmoUSIM-SJS1 -i 208930000000003 --op=8e27b6af0e692e750f32667a3b14605d -k 8baf473f2f8fd09487cccbd7097c6862 -s 8988211000000088313 -a 23605945

You can get your SIM card from sysmocom. You also need a card reader to write your SIM card. You can get a card reader from here or equivalent device will do.

Referensi

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=Free5GC:_Install&oldid=67297"