5G: Daftar Pembuat RF Power Amplifier

From OnnoWiki
Jump to navigation Jump to search

Ada beberapa pabrikan pembuat RF Power Amplifier untuk BTS di dunia. Beberapa di antarnya di perlihatkan di bawah ini,


Quantic PMI (Planar Monolithics)

The PA-2G18G-43-5-40-SFF from Quantic PMI is a Power Amplifier that operates from 2 to 18 GHz. It delivers a saturated output power of 10 W (40 dBm) with a gain of more than 38 dB. This PA requires a DC supply of 22 V and consumes less than 3.3 A of current. It is available in a module that measures 1.30 x 1.80 x 0.88 inches and has removable SMA-female connectors

Product Details
Part Number     PA-2G18G-43-5-40-SFF
Manufacturer    Quantic PMI (Planar Monolithics)
Description     10 W Power Amplifier from 2 to 18 GHz

General Parameters
Type            Power Amplifier
Configuration   Module with Connector
Frequency       2 to 18 GHz
Gain            38 to 43 dB
Gain Flatness   ±3.5 dB
Noise Figure    3.5 to 5 dB
Grade           Commercial, Military
Saturated Power 35 to 40 dBm
Saturated Power 3.16 to 10 W
Input Power     20 dBm
Input Power     0.1 W
VSWR            2.0:1
Supply Voltage  22 V
Dimensions      2 x 1.5 x 0.88 in.
Connectors      SMA, SMA - Female
Weight          2 oz
Cooling Options Optional Heatsink with 120 Vac Fan Available
Operating Temperature -40 to 85 Degree C
Storage Temperature   -55 to 125 Degree C 

Teledyne Microwave Solutions

The TSA-220005-201 from Teledyne Microwave Solutions is a GaN Power Amplifier that operates from 2 to 18 GHz. It delivers a 20 W (43 dBm) saturated output power with a small signal gain of more than 55 dB. The amplifier uses control circuitry to ensure safe start-up, and automatic thermal shutdown/recovery and has an external pin for TTL ON/OFF control. It requires a DC supply of 8/22 V and consumes less than 5.5 A of current. This amplifier is available in a hermetic module that measures 2.90 x 2.00 x 0.41 inches and requires a heat sink to keep the case temperatures within a safe operating range.

Product Details
Part Number            TSA-220005-201
Manufacturer           Teledyne Microwave Solutions
Description            20 W GaN Power Amplifier from 2 to 18 GHz

General Parameters
Type                   Power Amplifier
Configuration          Module with Connector
Application            Datalink
Industry Application   Radar, Electronic Warfare
Frequency              2 to 18 GHz
Small Signal Gain      55 dB
Gain Flatness          ±2.5 dB
Noise Figure           5 dB
Output Power           43 dBm
Output Power           19.95 W
Grade                  Commercial, Military
Saturated Power        43 dBm
Saturated Power        20 W
Input Power            20 dBm
Input Power            0.1 W
Impedance              50 Ohms
VSWR                   2.0:1
Sub-Category           GaN Amplifier
Harmonics              -10 dBc
Supply Voltage         22 to 29 V
Current Consumption    0.5 to 5.5 A
Technology             GaN
Package Type           Hermetic
Dimensions             2.9 x 2 x 0.410 in.
Connectors             SMA
DC Connectors          15-Pin Micro-D Pin
Cooling Options        External Heatsink required
Operating Temperature  -55 to 85 Degree C
Storage Temperature    -62 to 125 Degree C 


Exodus Advanced Communications

The MPA1020-1 from Exodus Advanced Communications is a RF Amplifier with Frequency 2 to 4 GHz, Gain 30 dB, Gain Flatness 2 dB, Output Power 30 to 31.76 dBm, Output Power 1 to 1.5 W. Tags: Power Amplifier. More details for MPA1020-1 can be seen below.

Product Details
Part Number           MPA1020-1
Manufacturer          Exodus Advanced Communications
Description           1 W Power Amplifier from 2 to 4 GHz

General Parameters
Type                  Power Amplifier
Configuration         Module with Connector
Frequency             2 to 4 GHz
Gain                  30 dB
Gain Flatness         2 dB
Output Power          30 to 31.76 dBm
Output Power          1 to 1.5 W
P1dB                  30 dBm
P1dB                  1 W
IM3                   30 dBc
Saturated Power       31.76 dBm
Saturated Power       1.5 W
Input Power           8 dBm
Input Power           0.01 W
Class                 AB
Impedance             50 Ohms
Pulsed/CW             CW
VSWR                  Infinity:1
Sub-Category          Linear Amplifier, GaN Amplifier, SSPA
Input Return Loss     10 dB
Harmonics             -20 dBc
Spurious              60 dBc
Supply Voltage        12 to 13 VDC
Current Consumption   0.9 Amp
Transistor Technology GaN
Dimensions            80 x 50 x 17 mm
Connectors            SMA, SMA - Female
Input Connector       SMA - Female
Output Connector      SMA - Female
Weight                150 gr.
Cooling Options       External Heatsink
Operating Temperature -20 to 75 Degree C
Storage Temperature   -40 to 85 Degree C
Note                  Relative Humidity : 5 to 95 %

Amcom Communications

The AM094233SF-3H from Amcom Communications is a RF Amplifier with Frequency 900 MHz to 4.2 GHz, Small Signal Gain 16 to 19.5 dB pk-pk, Gain Flatness ±3 dB, Output Power 31 to 32.5 dBm, Output Power 1.26 to 1.78 W. Tags: Power Amplifier. More details for AM094233SF-3H can be seen below.

Product Details
Part Number         AM094233SF-3H
Manufacturer        Amcom Communications
Description         High Power Amplifier Module 0.9 - 4.2GHz, 19.5dB

General Parameters
Type                Power Amplifier
Configuration       Module with Connector
Frequency           900 MHz to 4.2 GHz
Small Signal Gain   16 to 19.5 dB pk-pk
Gain Flatness       ±3 dB
Output Power        31 to 32.5 dBm
Output Power        1.26 to 1.78 W
P1dB                31 to 32 dBm
P1dB                1.259 to 1.585 W
Saturated Power     31.5 to 32.5 dBm
Saturated Power     1.41 to 1.78 W
Pulsed/CW           CW
Input Return Loss   12 dB
Output Return Loss  8 dB
Supply Voltage      -5 to 15 V
Current Consumption 65 to 975 mA
Connectors          SMA, SMA - Female
Input Connector     SMA - Female
Output Connector    SMA - Female

Narda-MITEQ

The AMF-3F-01000500-20-30P from Narda-MITEQ is a RF Amplifier with Frequency 1 to 5 GHz, Gain 30 dB, Gain Flatness ± 2 dB, Noise Figure 2 dB, P1dB 30 dBm. Tags: Power Amplifier, Low Noise Amplifier. More details for AMF-3F-01000500-20-30P can be seen below.

Product Details
Part Number          AMF-3F-01000500-20-30P
Manufacturer         Narda-MITEQ
Description          1000 to 5000 MHz, 30 dB, Power Amplifier, Low Noise Amplifier

General Parameters
Type                 Power Amplifier, Low Noise Amplifier
Configuration        Module with Connector
Industry Application Commercial, Aerospace & Defense
Frequency            1 to 5 GHz
Gain                 30 dB
Gain Flatness        ± 2 dB
Noise Figure         2 dB
P1dB                 30 dBm
P1dB                 1 W
Grade                Military
Impedance            50 Ohms
VSWR                 2.10:1
Input VSWR           2.10:1
Output VSWR          2.10:1
Supply Voltage       15 V
Current Consumption  600 mA


Referensi