4G: OpenAirInterface instalasi dari github
Revision as of 14:10, 30 September 2022 by Onnowpurbo (talk | contribs)
apt update apt -y install git git config --global user.name "Your Name" git config --global user.email "Your email address"
cd /usr/local/src git clone https://gitlab.eurecom.fr/oai/openairinterface5g.git
cd /usr/local/src/openairinterface5g source oaienv cd cmake_targets/ ./build_oai -I -w USRP --eNB --UE
Konfigurasi conf ada di
https://gitlab.eurecom.fr/oai/openairinterface5g/-/wikis/home/testing-gnb-vs-cots-ue
masukan ke
/usr/local/src/openairinterface5g/ci-scripts/conf_files/enb.conf
Edit enb.conf
plmn_list = ( { mcc = 510; mnc = 33; mnc_length = 2; } );
// IP addres EPC ////////// MME parameters: mme_ip_address = ( { ipv4 = "192.168.100.236"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; } );
///X2 enable_x2 = "yes"; t_reloc_prep = 1000; /* unit: millisecond */ tx2_reloc_overall = 2000; /* unit: millisecond */
// IP address ENB NETWORK_INTERFACES : { ENB_INTERFACE_NAME_FOR_S1_MME = "eth1"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.100.239/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.100.239/24"; ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.100.239/24"; ENB_PORT_FOR_X2C = 36422; # Spec 36422 };
Run:
https://gitlab.eurecom.fr/oai/openairinterface5g/-/blob/develop/doc/L2NFAPI_S1.md
sudo -E ./ran_build/build/lte-softmodem -O ../ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf > enb.log 2>&1
sudo -E ./ran_build/build/lte-softmodem -O ../ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf > enb.log 2>&1
cd /usr/local/src/openairinterface5g/cmake_targets/lte_build_oai/build/ sudo -E ./lte-softmodem -O /usr/local/src/openairinterface5g/ci-scripts/conf_files/enb.conf