Mikrotik: OpenVPN - Site to Site

From OnnoWiki
Jump to navigation Jump to search

Sumber: https://www.marthur.com/networking/mikrotik-setup-a-site-to-site-openvpn-connection/314/


%MikroTik Identity%  HQ
%Client Name%        Cabang
%MikroTik Local IP%  192.168.88.198
%Passphrase%         123456789


MIKROTIK A (SERVER): CERTIFICATE SETUP & EXPORT

CREATE THE CERTIFICATES

/certificate add name=ca-template common-name=CA-HQ key-usage=key-cert-sign,crl-sign
/certificate add name=server-template common-name=SERVER
/certificate add name=client-Cabang-template common-name=client-Cabang

SIGN THE CERTIFICATES

Butuh waktu, jangan copy paste sekaligus.

/certificate sign ca-template ca-crl-host=192.168.88.198 name=CA-HQ
/certificate sign ca=CA-HQ server-template name=SERVER
/certificate sign ca=CA-HQ client-Cabang-template name=client-Cabang

ENABLE “TRUSTED” FOR THE CERTIFICATE AUTHORITY AND SERVER ONLY

/certificate set CA-HQ trusted=yes
/certificate set SERVER trusted=yes

The Certificates window should now look similar to this screenshot.

EXPORT THE CERTIFICATES

/certificate export-certificate CA-HQ
/certificate export-certificate client-Cabang export-passphrase=123456789

Ambil file menggunakan FTP

cert_export_CA-HQ.crt
cert_export_client-Cabang.key
cert_export_client-Cabang.crt

MIKROTIK B (CLIENT): CERTIFICATE SETUP & IMPORT

IMPORT THE CERTIFICATES

/certificate import file-name=cert_export_CA-%MikroTik Identity%.crt passphrase=""
/certificate import file-name=cert_export_client-%Client Name%.crt passphrase=%Passphrase%
/certificate import file-name=cert_export_client-%Client Name%.key passphrase=%Passphrase%

The Certificates window should now look similar to this screenshot.

MIKROTIK A (SERVER): OPENVPN PPP CONFIGURATION IMPORT THE CERTIFICATES

/ppp profile add name=openvpn local-address=192.168.200.254 remote-address=192.168.200.10 change-tcp-mss=yes use-compression=no use-encryption=required

OR Navigate to PPP > Profiles and create a new PPP Profile (modify settings as needed):


In the screenshot above, don’t forget to check the protocols tab. Under the protocols tab, the option for “Use Compression” and “Use Encryption” can be set. These two options are already set in the command, but cannot be seen in the screenshot. In addition, take note of the Local and Remote IP addresses (192.168.200.254 and 192.168.200.10), these two addresses define the static IP assigned to each end of the VPN tunnel. These IP addresses can be set to anything you want as long as they don’t match any of the existing subnets that are currently in use at each site.

CREATE A PPP SECRET (MODIFY COMMAND AS NEEDED)

/ppp secret add name=NewYork password=NyTx325 profile=openvpn service=ovpn

OR Navigate to PPP > Secrets and create a new PPP Secret (modify settings as needed):


CONFIGURE THE OVPN SERVER (MODIFY COMMAND AS NEEDED):

/interface ovpn-server server set certificate=SERVER cipher=blowfish128,aes128,aes192,aes256 default-profile=openvpn enabled=yes require-client-certificate=yes

OR Navigate to PPP > Interface, click on the OVPN Server button and configure the OVPN Server (modify settings as needed):


CREATE A ROUTE (MODIFY COMMAND AS NEEDED):

/ip route add dst-address=192.168.88.0/24 gateway=192.168.200.10

OR Navigate to IP > Routes and create a new Route (modify settings as needed):


MIKROTIK A (SERVER): OPENVPN FIREWALL/NAT CONFIGURATION CREATE THE FIREWALL FILTER AND NAT BYPASS RULES (MODIFY COMMAND AS NEEDED):

/ip firewall filter add chain=input dst-port=1194 protocol=tcp
/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 dst-address=192.168.88.0/24 place-before=0

MIKROTIK B (CLIENT): OPENVPN PPP CONFIGURATION CREATE A OVPN CLIENT (MODIFY COMMAND AS NEEDED)

/interface ovpn-client add certificate=cert_export_client-NewYork.crt_0 cipher=aes256 connect-to=71.157.75.49 mac-address=02:2F:03:6C:10:59 name=ovpn-Texas password=NyTx325 profile=default-encryption user=NewYork

OR Navigate to PPP > Interface, create a new OVPN Client:


MIKROTIK B (CLIENT): OPENVPN ROUTES CONFIGURATION CREATE A ROUTE (MODIFY COMMAND AS NEEDED):

/ip route add dst-address=192.168.100.0/24 gateway=192.168.200.254

OR Navigate to IP > Routes and create a new Route (modify settings as needed):


MIKROTIK B (CLIENT): OPENVPN FIREWALL/NAT CONFIGURATION CREATE THE FIREWALL FILTER AND NAT BYPASS RULES (MODIFY COMMAND AS NEEDED):

/ip firewall filter add chain=input dst-port=1194 protocol=tcp
/ip firewall nat add chain=srcnat src-address=192.168.88.0/24 dst-address=192.168.100.0/24 place-before=0

Referensi