QEMU: Bridge Network Adapter
Revision as of 10:15, 15 September 2020 by Onnowpurbo (talk | contribs) (Created page with "Sumber: https://gist.github.com/extremecoders-re/e8fd8a67a515fee0c873dcafc81d811c ==Setup== Create a bridge sudo su brctl addbr br0 ip addr flush dev enp3s0 brctl addif...")
Sumber: https://gist.github.com/extremecoders-re/e8fd8a67a515fee0c873dcafc81d811c
Setup
Create a bridge
sudo su brctl addbr br0 ip addr flush dev enp3s0 brctl addif br0 enp3s0 tunctl -t tap0 -u `whoami` brctl addif br0 tap0
Make sure everything is up
ifconfig enp3s0 up ifconfig tap0 up ifconfig br0 up
brctl show dhclient -v br0
Cleanup
Remove tap interface tap0 from bridge br0
brctl delif br0 tap0 tunctl -d tap0 brctl delif br0 enp3s0
ifconfig br0 down brctl delbr br0 ifconfig enp3s0 up dhclient -v enp3s0
Release IP
dhclient -v -r <interface> dhclient -v <interface>