Jitsi
Sumber: https://www.vultr.com/docs/how-to-install-jitsi-meet-on-ubuntu-18-04-lts
Jitsi Meet is a free and open-source video conferencing service solution packed with various premium features, such as superior sound quality, high-grade encryption and privacy, and universal multi-platform availability. With the help of Jitsi Meet, you can easily set up a stunning video conferencing service of your own.
One Click Jitsi Server
Vultr has preinstalled Jitsi servers ready to launch! Deploy a Jitsi Meet server in your customer portal without any installation steps required. The One Click Jitsi server supports your custom domain name, a Let's Encrypt SSL certificate, and it's the best way to install Jitsi.
Learn more about our One Click Jitsi server, or if you prefer to install your server manually, follow the steps below. Manual Installation
This tutorial explains the process of establishing a video conferencing service on an Ubuntu 18.04 LTS server instance using Jitsi Meet. Prerequisites
A fresh Vultr Ubuntu 18.04 LTS x64 server instance with an IPv4 address 203.0.113.1. A sudo user. A domain jitsimeet.example.com being pointed to the server instance mentioned above.
Note: When deploying on your own server instance, be sure to replace all example values with your actual ones.
Step 1: Setup a swap partition
For a machine with 2GB of memory, it's recommended to setup a 2GB (2048M) swap partition in order to improve system performance.
sudo dd if=/dev/zero of=/swapfile count=2048 bs=1M sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab free -m
Note: If you are using a different server size, the size of the swap partition may vary.
Step 2: Setup the machine's hostname and fully qualified domain name (FQDN)
You need to properly setup a hostname and an FQDN for the machine before you can enable HTTPS security by deploying a Let's Encrypt HTTPS certificate.
The following commands will setup a hostname, jitsimeet, and an FQDN, jitsimeet.example.com, for the machine:
sudo hostnamectl set-hostname jitsimeet sudo sed -i 's/^127.0.1.1.*$/127.0.1.1 jitsimeet.example.com jitsimeet/g' /etc/hosts
Confirm the results:
hostname hostname -f
Step 3: Tweak firewall rules for running Jitsi Meet
As required by Jitsi Meet, you need to allow OpenSSH, HTTP, and HTTPS traffic, along with inbound UDP traffic on port 10000 through port 20000:
sudo ufw allow OpenSSH sudo ufw allow http sudo ufw allow https sudo ufw allow in 10000:20000/udp sudo ufw enable
When you see the prompt Command may disrupt existing ssh connections. Proceed with operation (y|n)?, input y and then press ENTER.
Step 4: Update the system
For security and performance purposes, its necessary to update the Ubuntu 18.04 LTS system to the latest status:
sudo apt update sudo apt upgrade -y && sudo shutdown -r now
During the upgrade, you may be informed that the currently installed version of the grub configuration file has been locally modified. Since we are actually not responsible for the modification, use the UP arrow to highlight the install the package maintainer's version option, and then press ENTER.
After the system reboot, log back in as the same sudo user to move on.
Step 5: Install OpenJDK Java Runtime Environment (JRE) 8
Jitsi Meet requires Java Runtime Environment. Install OpenJDK JRE 8:
sudo apt install -y openjdk-8-jre-headless
Having OpenJDK JRE 8 installed, use the following command to verify the result:
java -version
The output will be similar to the following:
openjdk version "1.8.0_171" OpenJDK Runtime Environment (build 1.8.0_171-8u171-b11-0ubuntu0.18.04.1-b11) OpenJDK 64-Bit Server VM (build 25.171-b11, mixed mode)
In addition, you can setup the JAVA_HOME environment variable as follows:
echo "JAVA_HOME=$(readlink -f /usr/bin/java | sed "s:bin/java::")" | sudo tee -a /etc/profile source /etc/profile
Step 6: Install the Nginx web server
In order to better serve Jitsi Meet, you can install an Nginx web server before actually installing Jitsi Meet:
sudo apt install -y nginx sudo systemctl start nginx.service sudo systemctl enable nginx.service
Having Nginx installed, you don't need to manually configure it because the Jitsi Meet installer will deal with this job for you later.
Note: If Nginx or Apache is not in place, the Jitsi Meet installer will automatically install Jetty along with the Jitsi Meet program.
Step 7: Install Jitsi Meet
On a modern Ubuntu or Debian system, you can easily install Jitsi Meet using the official Jitsi deb repo.
First setup the Jitsi repository on your system:
cd wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | sudo apt-key add - sudo sh -c "echo 'deb https://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list" sudo apt update -y
Then install the full suite of Jitsi Meet:
sudo apt install -y jitsi-meet
During the installation, when you are asked to provide the hostname of the current installation, type in the FQDN jitsimeet.example.com you setup earlier and then press ENTER.
When you are asked about the SSL certificate, highlight the Generate a new self-signed certificate (You will later get a chance to obtain a Let's Encrypt certificate) option and then press ENTER.
Having Jitsi Meet successfully installed, use the following script to apply for a Let's Encrypt SSL certificate:
sudo /usr/share/jitsi-meet/scripts/install-letsencrypt-cert.sh
During the process, input your email admin@example.com as prompted and then press ENTER. This script will automatically handle any tasks related to the Let's Encrypt SSL certificate.
Finally, point your favorite web browser to http://jitsimeet.example.com or https://jitsimeet.example.com to access your Jitsi Meet Video conferencing service. Feel free to explore the interface. Clicking the GO button will immediately create a Video conferencing channel for you.