IPv6 AutoConfiguration: DHCPv6 Ubuntu
Sumber: https://wiki.ubuntu.com/DHCPv6
DHCPv6
Introduction
As of Ubuntu version 11.04 Natty Narwhal, we have moved to ISC-DHCPv4, which now supports DHCP for IPv6, both as a server and as a client.
DHCPv6 offers advantages over "traditional" stateless IPv6 autoconfigurations: as with IPv4, you can hand out specific addresses to clients and have them keep the same address throughout their lifetime. DHCPv6 also obviously allows logging of reservations and selected addresses, which can allow system administrators to more easily identifies issues that could arise from autoconfiguration.
ISC DHCP v6 Server
Install DHCP server
Instalasi
sudo su apt update apt install isc-dhcp-server
File konfigurasi ada di
/etc/dhcp/dhcpd.conf /etc/dhcp/dhcpd6.conf
Setup DHCP server
File yang penting untuk di konfigurasi
/etc/init.d/isc-dhcp-server /etc/dhcp
To configure the DHCP server to start on your system, you will first need to modify the init script in :
Change all the places where dhcpd is started to add an extra parameter -6; there should be three, you can place this new parameter just before -t is passed to dhcpd.
If you instead want a DHCP server for IPv4 and one for IPv6 to cohabit on the same system, copy the original init script to a new file; the original should not be modified, and your new copy should have the extra -6 parameter.
To configure the DHCP server; you can then modify the included config file in /etc/dhcp/dhcpd.conf. Note the following syntax changes for common keywords:
DHCP v4 keyword DHCP v6 keyword
subnet <address/prefix> subnet6 <address/prefix>
range <start ip> <end ip> range6 (<start ip> <end ip> | <network/prefix>)
Consider checking man dhcpd.conf for the full syntax reference.
ISC DHCP v6 Client
Installing the DHCP client
On most systems, the ISC DHCP client should already be installed. This is true for both standard desktop and server installs.
The ISC DHCP client can be installed with the following command:
sudo apt-get install isc-dhcp-client
You can then use the dhcp client by issuing the following command:
sudo dhclient <iface>
Where <iface> is the network device you want to configure. For example, eth0, or wlan0.
Client configuration
ISC DHCP 4 provides much of the same configuration files and parameters as DHCP 3.
The configuration file used by dhclient is /etc/dhcp/dhclient.conf. Most configuration parameters are the same as in DHCP3 and /etc/dhcp3/dhclient.conf; please refer to man dhclient.conf.
From man dhclient.conf:
The client does not yet have a default DHCPv6 Option Request Option (ORO), nor
has it been integrated with the 'request' and 'require' syntax above. It is
neccessary to configure an ORO then.
send dhcp6.oro 1, 2, 7, 12, 13, 23, 24, 39;
The above ORO will request both identifiers (server, client), the preference,
unicast, nameservers, domain-search, and FQDN(v6) options.