BIRD2: OSPF Sederhana
Revision as of 05:29, 18 January 2019 by Onnowpurbo (talk | contribs) (Created page with " center|900px|thumb ==Sambungan== R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3:...")
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
IP address
Reset konfigurasi OpenWRT menggunakan teknik BIRD: dari OpenWRT
R1:
ifconfig eth1 10.10.1.1 netmask 255.255.255.252 ifconfig eth2 10.10.1.5 netmask 255.255.255.252 ifconfig eth3 192.168.122.100 netmask 255.255.255.0 ifconfig eth3 192.168.122.101 netmask 255.255.255.0 ifconfig eth3 192.168.122.102 netmask 255.255.255.0
Router2:
ifconfig eth1 10.10.1.6 netmask 255.255.255.252 ifconfig eth2 10.10.1.9 netmask 255.255.255.252 ifconfig eth3 172.16.1.1 netmask 255.255.0.0
Router3:
ifconfig eth1 10.10.1.2 netmask 255.255.255.252 ifconfig eth2 10.10.1.10 netmask 255.255.255.252 ifconfig eth3 192.168.1.1 netmask 255.255.255.0
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all;
router id 10.10.1.1;
protocol kernel {
import all;
export all;
learn;
scan time 20;
}
protocol device {
import all;
export all;
scan time 10;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.0/30;
# 10.10.1.4/30;
# };
interface eth1, eth2, eth3 {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R2:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all;
router id 10.10.1.6;
protocol kernel {
import all;
export all;
learn;
scan time 20;
}
protocol device {
import all;
export all;
scan time 10;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.4/30;
# 10.10.1.8/30;
# 172.16.0.0/16;
# };
interface "eth1", "eth2", "eth3" {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
R3:
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD di OpenWRT
edit
log syslog all;
router id 10.10.1.2;
protocol kernel {
import all;
export all;
learn;
scan time 20;
}
protocol device {
import all;
export all;
scan time 10;
}
protocol ospf {
import all;
export all;
area 0 {
# networks {
# 10.10.1.0/30;
# 10.10.1.8/30;
# 192.168.1.0/24;
# };
interface "eth1", "eth2", "eth3" {
cost 5;
type broadcast;
hello 5; retransmit 2; wait 10; dead 20;
};
};
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
Verify
Cek R1, R2, R3
show protocols ospf1 show ospf show route
Referensi
- https://wiki.mikrotik.com/wiki/Manual:OSPF-examples
- https://github.com/BIRD/bird/blob/master/doc/bird.conf.example
Pranala Menarik