BIRD: BGP Sederhana
Ada tiga (3) ISP
ISP1:
IP 192.168.1.1/24 menuju ISP3 IP 192.168.3.1/24 menuju ISP2 AS 10 IP 10.100.100.0/24 IP 10.100.200.0/24
ISP2
IP 192.168.2.1/24 - menuju ISP3 IP 192.168.3.2/24 - menuju ISP1 AS 20 IP 10.10.10.0/24 IP 10.10.20.0/24
ISP3 (kita)
IP 192.168.1.2/24 - menuju ISP1 IP 192.168.2.2/24 - menuju ISP2 AS 30 IP 10.1.1.0/24 IP 10.1.2.0/24
Sambungan
R1 e1 --> R3 e1 e2 --> R2 e2 e3 --> LAN 10.100.100.0/24 e4 --> LAN 10.100.200.0/24
R2 e1 --> R3 e2 e2 --> R1 e2 e3 --> LAN 10.10.10.0/24 e4 --> LAN 10.10.20.0/24
R3 e1 --> R1 e1 e2 --> R2 e1 e3 --> LAN 10.1.1.0/24 e4 --> LAN 10.1.2.0/24
Setup connection
Pastikan semua ifconfig bersih, lakukan langkah BIRD: dari OpenWRT
ISP1
ifconfig eth1 192.168.1.1 netmask 255.255.255.0 ifconfig eth2 192.168.3.1 netmask 255.255.255.0 ifconfig eth3 10.100.100.1 netmask 255.255.255.0 ifconfig eth4 10.100.200.1 netmask 255.255.255.0
ISP2
ifconfig eth1 192.168.2.1 netmask 255.255.255.0 ifconfig eth2 192.168.3.2 netmask 255.255.255.0 ifconfig eth3 10.10.10.1 netmask 255.255.255.0 ifconfig eth4 10.10.20.1 netmask 255.255.255.0
ISP3
ifconfig eth1 192.168.1.2 netmask 255.255.255.0 ifconfig eth2 192.168.2.2 netmask 255.255.255.0 ifconfig eth3 10.1.1.1 netmask 255.255.255.0 ifconfig eth4 10.1.2.1 netmask 255.255.255.0
BGP Peering
Consider that IP connectivity between ISPs edge routers and Our Core router is already set up and working properly. So we can start to establish BGP peering to both ISPs.
ISP1
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD1 di OpenWRT
edit
log syslog all;
router id 192.168.1.1;
protocol kernel {
learn; # Learn all alien routes from the kernel
# persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
import all; # Default is import all
export all; # Default is export none
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol bgp {
import all;
export all;
local as 10;
neighbor 192.168.1.2 as 20;
}
protocol bgp {
import all;
export all;
local as 10;
neighbor 192.168.3.2 as 30;
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
ISP2
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD1 di OpenWRT
edit
log syslog all;
router id 192.168.2.1;
protocol kernel {
learn; # Learn all alien routes from the kernel
# persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
import all; # Default is import all
export all; # Default is export none
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol bgp {
import all;
export all;
local as 20;
neighbor 192.168.3.1 as 10;
}
protocol bgp {
import all;
export all;
local as 20;
neighbor 192.168.2.2 as 30;
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
ISP3
# vi /usr/local/etc/bird6.conf # BIRD appliance di GNS3 vi /etc/bird.conf # BIRD1 di OpenWRT
edit
log syslog all;
router id 192.168.1.2;
protocol kernel {
learn; # Learn all alien routes from the kernel
# persist; # Don't remove routes on bird shutdown
scan time 20; # Scan kernel routing table every 20 seconds
import all; # Default is import all
export all; # Default is export none
}
protocol device {
scan time 10; # Scan interfaces every 10 seconds
}
protocol bgp {
import all;
export all;
local as 30;
neighbor 192.168.1.1 as 10;
}
protocol bgp {
import all;
export all;
local as 30;
neighbor 192.168.2.2 as 20;
}
# BIRD1 di OpenWRT killall zebra killall bgpd killall watchquagga killall ospfd killall ospf6d killall ripd killall ripngd killall bird4 bird4
Test
birdc4
ketik
show interfaces show protocols all bgp1 show ip route
show route [<prefix>|for <prefix>|for <ip>] [table <t>] [filter <f>|where <cond>]
[all] [primary] [filtered] [(export|preexport|noexport)
] [protocol
] [stats|count]
Referensi
Pranala Menarik